Unveiling the hidden complexities of the PlayStation 5 (PS5) controller could seem daunting, but it surely’s a rewarding endeavor for tech-savvy people. Nonetheless, dismantling this intricate system requires exact execution and adherence to correct procedures. This complete information will meticulously information you thru the intricate technique of disassembling your PS5 controller, empowering you with the data and confidence to sort out this enterprise.
Earlier than embarking on this disassembly journey, it is crucial to collect the required instruments, together with a small Phillips screwdriver and a pry software. Moreover, making certain a well-lit and arranged workspace will considerably improve your expertise. Endurance and meticulous consideration to element will function your steadfast companions all through this course of. Bear in mind, haste makes waste, and dashing by the steps could result in unintended penalties. Due to this fact, proceed with care and precision to keep up the integrity of your controller.
First, we’ll enterprise into the controller’s exterior, the place the backplate beckons for elimination. Find the 4 screws securing it and gently unscrew them with the Phillips screwdriver. As soon as liberated, fastidiously elevate the backplate away, unveiling the controller’s inner circuitry. Take warning to not apply extreme power, as delicate ribbon cables join the backplate to the controller’s mainboard. These cables are very important to the controller’s performance, so deal with them with the utmost care. Within the subsequent steps, we’ll delve deeper into the controller’s anatomy, regularly disentangling its inside workings.
Disassembling the Exterior Shell
**Step 1: Eradicating the Again Screws**
To start disassembling the exterior shell of your PS5 controller, you may want a T5 Torx screwdriver. Begin by flipping the controller over and finding the 4 T5 screws on the again. These screws maintain the 2 halves of the shell collectively.
Rigorously unscrew all 4 screws. Make sure you maintain onto them, as you may want them later for reassembly.
**Step 2: Separating the Shell Halves**
As soon as the screws are eliminated, you possibly can start separating the 2 halves of the shell. Begin by gently prying aside the highest and backside edges of the controller. The 2 halves of the shell ought to separate simply.
**Step 3: Disconnecting the Battery Connector**
As soon as the shell halves are separated, you may have to disconnect the battery connector. The battery connector is a small, white connector situated on the left-hand aspect of the controller.
Gently elevate the battery connector up and away from the controller. Watch out to not injury the connector or the wires connected to it.
**Step 4: Eradicating the Shoulders**
The following step is to take away the shoulder buttons. The shoulder buttons are held in place by two screws every. Find the 4 screws and take away them utilizing your T5 Torx screwdriver.
As soon as the screws are eliminated, you possibly can elevate the shoulder buttons up and away from the controller. Watch out to not injury the buttons or the wires connected to them.
**Step 5: Eradicating the Faceplate**
The ultimate step is to take away the faceplate. The faceplate is held in place by clips. Gently pry the faceplate across the edges till it pops off.
As soon as the faceplate is eliminated, the exterior shell of your PS5 controller might be fully disassembled.
Eradicating the Battery
To take away the battery, you’ll need a Phillips #00 screwdriver.
1. Flip the controller the wrong way up in order that the again is going through you.
2. Find the 4 screws that maintain the again panel in place and take away them.
3. Rigorously elevate the again panel off of the controller. Watch out to not injury the ribbon cable that connects the again panel to the controller.
4. Find the battery connector and disconnect it from the controller.
5. Take away the battery from the controller.
| Screw Measurement | Amount |
|---|---|
| Phillips #00 | 4 |
6. To reassemble the controller, merely observe these steps in reverse order.
Accessing the Motherboard
As soon as you’ve got eliminated the again cowl, you may have entry to the motherboard. Nonetheless, earlier than you possibly can disconnect the motherboard, you must take away just a few extra screws.
Eradicating the Motherboard Screws
There are 10 screws that maintain the motherboard in place. They’re situated within the following locations:
- 4 screws within the corners of the motherboard
- Two screws on the left aspect of the motherboard, close to the headphone jack
- Two screws on the fitting aspect of the motherboard, close to the USB ports
- Two screws in the midst of the motherboard, close to the battery connector
Use a Phillips #0 screwdriver to take away all 10 screws. As soon as the screws are eliminated, you possibly can fastidiously elevate the motherboard up and out of the controller.
Disconnecting the Motherboard
As soon as the motherboard is lifted up, you may have to disconnect just a few cables. These cables are situated on the underside of the motherboard, close to the battery connector.
There are three cables that must be disconnected:
| Cable | Location |
|---|---|
| Battery cable | Subsequent to the battery connector |
| Rumble motor cable | Subsequent to the rumble motors |
| Headphone jack cable | Subsequent to the headphone jack |
To disconnect a cable, gently pull on the connector till it comes free. Don’t pull on the wires, as this might injury the cable.
Detaching the Joysticks
Step 1: Take away the Joysticks’ Escutcheons
Find the 2 small, spherical escutscheons that cowl the bottom of every joystick. Utilizing a flat-head screwdriver or a spudger software, gently pry up the escutscheons and take away them.
Step 2: Expose the Joystick Screw
As soon as the escutscheons are eliminated, you may see the one screw that holds every joystick in place. Utilizing a Phillips #00 screwdriver, fastidiously unscrew each screws.
Step 3: Raise and Disconnect the Joystick
Grasp the underside of the joystick and gently elevate it upward. As you elevate, disconnect the ribbon cable that connects the joystick to the controller’s mainboard by pulling the connector straight up.
Step 4: Use a Spudger to Disconnect the Aspect Buttons
Earlier than eradicating the joystick fully, you must disconnect the aspect buttons (L1/R1 or L2/R2) related to it. Insert a spudger or a flat-head screwdriver into the small hole between the joystick and the controller’s physique. Gently pry as much as disconnect the aspect button. Repeat this step for the opposite aspect button on the joystick.
| Joystick | Aspect Buttons |
|---|---|
| Left | L1/L2 |
| Proper | R1/R2 |
Disconnecting the Triggers
The triggers on the PS5 controller are simple to disconnect, making it attainable to exchange them in the event that they develop into broken. This is learn how to do it:
- Take away the 4 screws on the again of the controller.
- Gently pry the controller open utilizing a plastic prying software.
- Find the set off meeting, which is held in place by three screws.
- Take away the three screws to detach the set off meeting.
- Rigorously disconnect the 2 ribbon cables that join the triggers to the controller’s mainboard. The ribbon cables are fragile, so make sure you use care when disconnecting them.
- As soon as the ribbon cables are disconnected, the set off meeting will be faraway from the controller.
To reconnect the triggers, merely reverse the steps above. When reconnecting the ribbon cables, make sure you align the white arrow on the cable with the white dot on the connector on the mainboard.
| Screw Measurement | Amount |
|---|---|
| T8 Torx | 4 |
| PH00 Phillips | 3 |
Separating the D-Pad and Face Buttons
Step 5: Eradicating the Button Ribbon Cable
Disconnect the eight-pin button ribbon cable from the motherboard by gently prying it upwards with a plastic opening software. Keep away from pulling or bending the cable excessively to forestall injury.
Warning: Deal with the ribbon cable with care as it’s delicate and susceptible to ripping. If the cable turns into broken, it’s possible you’ll want to exchange your entire button meeting.
Step 6: Disassembling the D-Pad Meeting
6.1: Eradicating the Face Buttons
Take away the 4 screws securing the face buttons utilizing a Phillips #00 screwdriver. Raise the face buttons straight as much as detach them from the controller. Word the orientation of the buttons and substitute them in the identical method to make sure correct performance.
6.2: Separating the D-Pad PCB
Disconnect the two-pin connector attaching the D-Pad PCB to the motherboard by gently prying it upwards with a plastic opening software. Rigorously elevate the D-Pad PCB away from the controller.
6.3: Disassembling the D-Pad
To disassemble the D-Pad, gently press down on the middle of the D-Pad and take away the highest half. Then, take away the 4 screws securing the underside a part of the D-Pad and separate the person buttons.
Eradicating the Speaker Module
To take away the speaker module out of your PS5 controller, observe these steps:
1. Take away the again cowl.
Use a T8 Torx screwdriver to take away the 4 screws holding the again cowl in place. Raise the again cowl off the controller.
2. Disconnect the battery ribbon cable.
Use a spudger to fastidiously disconnect the ribbon cable connecting the battery to the motherboard.
3. Take away the battery.
Use your fingers to elevate the battery out of the controller.
4. Disconnect the speaker ribbon cable.
Use a spudger to fastidiously disconnect the ribbon cable connecting the speaker to the motherboard.
5. Take away the speaker screws.
Use a T5 Torx screwdriver to take away the 2 screws holding the speaker in place.
6. Raise the speaker out of the controller.
Use your fingers to fastidiously elevate the speaker out of the controller.
7. Troubleshooting: Speaker Not Working
If the speaker is just not working after reassembly, verify the next:
| Potential Trigger | Resolution |
|---|---|
| Broken speaker | Substitute the speaker |
| Free connection | Reseat the speaker ribbon cable |
| Defective motherboard | Contact Sony for help |
Isolating the Rumble Motors
The rumble motors add an immersive contact to your gaming expertise, offering suggestions for explosions, impacts, and different in-game occasions. Isolating them requires some precision and care:
1. Find the 2 screws holding the rumble motor meeting to the controller’s backplate.
2. Use a T6 Torx screwdriver to take away the screws.
3. Rigorously pry the motor meeting away from the controller. It might be barely adhered, so use a plastic pry software to keep away from injury.
4. Disconnect the motor meeting’s ribbon cable from the controller’s mainboard.
5. Word the orientation of the rumble motors. They have to be reinstalled in the identical place later.
6. Use a T8 Torx screwdriver to take away the 4 screws holding every rumble motor in place.
7. Gently elevate every motor out of its housing.
Disassembling the Rumble Motors (Elective)
For additional disassembly, you possibly can take away the rumble motors’ plastic housings:
1. Examine the plastic housing for small screws or clips. Take away them.
2. Pry the plastic housing open fastidiously, utilizing a plastic pry software to keep away from injury.
3. Word the orientation of the gears and magnets contained in the housing. They have to be reassembled appropriately.
4. Rigorously take away the gear and magnet meeting from the housing.
Disassembling the Touchpad
The touchpad is without doubt one of the most vital elements of the PS5 controller. It permits you to navigate the consumer interface, play video games, and work together with different gamers. In the event you’re having issues along with your touchpad, it’s possible you’ll have to disassemble it to wash it or substitute it.
This is learn how to disassemble the touchpad:
- Take away the 4 screws on the again of the controller.
- Gently pry the again panel off the controller.
- Find the touchpad ribbon cable connector. It is a small, black connector situated on the highest of the motherboard.
- Use a spudger to softly pry the ribbon cable connector up from the motherboard.
- Rigorously elevate the touchpad out of the controller.
Cleansing the Touchpad
In case your touchpad is soiled, you possibly can clear it with a smooth fabric and a few isopropyl alcohol. Make sure you dry the touchpad fully earlier than reassembling the controller.
Changing the Touchpad
In case your touchpad is broken, you possibly can substitute it with a brand new one. This is learn how to substitute the touchpad:
- Find the brand new touchpad ribbon cable connector. It is a small, black connector situated on the again of the touchpad.
- Use a spudger to softly pry the ribbon cable connector onto the motherboard.
- Rigorously place the touchpad into the controller.
- Substitute the again panel and screws.
Your PS5 controller ought to now be working correctly.
| Step | Motion |
|---|---|
| 1 | Take away the 4 screws on the again of the controller. |
| 2 | Gently pry the again panel off the controller. |
| 3 | Find the touchpad ribbon cable connector. It is a small, black connector situated on the highest of the motherboard. |
| 4 | Use a spudger to softly pry the ribbon cable connector up from the motherboard. |
| 5 | Rigorously elevate the touchpad out of the controller. |
| 6 | Find the brand new touchpad ribbon cable connector. It is a small, black connector situated on the again of the touchpad. |
| 7 | Use a spudger to softly pry the ribbon cable connector onto the motherboard. |
| 8 | Rigorously place the touchpad into the controller. |
| 9 | Substitute the again panel and screws. |
Reassembling the Controller
Now that you’ve got eliminated all of the parts and cleaned them, it is time to reassemble the controller. Comply with these steps in reverse order to place all of it again collectively:
1. Reattach the L2/R2 Triggers
Align the L2/R2 triggers with their slots and snap them again into place.
2. Reinstall the Battery
Insert the battery into its compartment and slide it in till it clicks.
3. Reattach the Again Shell
Align the again shell with the entrance shell and snap them collectively firmly.
4. Screw within the Backplate
Use the 5 screws to safe the backplate to the again shell.
5. Reattach the Handles
Slide the handles again onto the controller till they snap into place.
6. Reattach the Directional Pad
Align the directional pad with its slot and push it in till it clicks.
7. Reattach the Buttons
Align the buttons with their respective slots and press them in till they snap into place.
8. Reattach the Analog Sticks
Push the analog sticks again into their sockets till they click on.
9. Reattach the Touchpad
Align the touchpad with its slot and push it in till it clicks.
10. Take a look at the Controller
Join the controller to your PlayStation 5 console or PC and check the performance of all buttons, sticks, triggers, and touchpad to make sure the whole lot is working appropriately earlier than you begin enjoying once more.
Learn how to Take a PS5 Controller Aside
Taking aside a PS5 controller is a comparatively easy course of that may be accomplished in a couple of minutes. Nonetheless, it is very important take your time and observe the directions fastidiously to keep away from damaging the controller. Listed below are the steps on learn how to take aside a PS5 controller:
- Take away the 4 screws on the again of the controller utilizing a Phillips #00 screwdriver.
- Gently pry open the 2 halves of the controller utilizing a plastic pry software or your fingers.
- Disconnect the battery connector by gently pulling it straight up.
- Take away the six screws holding the motherboard in place utilizing a Phillips #00 screwdriver.
- Gently elevate the motherboard out of the controller.
- Disconnect the ribbon cable connecting the buttons to the motherboard.
- Take away the 4 screws holding the set off meeting in place utilizing a Phillips #00 screwdriver.
- Gently elevate the set off meeting out of the controller.
- Disconnect the ribbon cable connecting the analog sticks to the motherboard.
- Take away the 2 screws holding the analog stick meeting in place utilizing a Phillips #00 screwdriver.
- Gently elevate the analog stick meeting out of the controller.
- The controller is now disassembled.
Individuals Additionally Ask About Learn how to Take a PS5 Controller Aside
What instruments do I have to take aside a PS5 controller?
You have to a Phillips #00 screwdriver and a plastic pry software or your fingers.
Is it tough to take aside a PS5 controller?
No, it’s comparatively simple to take aside a PS5 controller. Nonetheless, it is very important observe the directions fastidiously to keep away from damaging the controller.
Can I substitute the battery in a PS5 controller?
Sure, you possibly can substitute the battery in a PS5 controller. Nonetheless, it is very important use a brand new battery that’s the similar kind as the unique battery.
