Changing the battery in a First Alert smoke alarm is an easy activity that may assist guarantee the security of your own home and household. When the battery is low, the alarm will emit a chirping sound. Changing the battery as quickly as potential is important to make sure that the alarm will proceed to operate correctly within the occasion of a fireplace.
To switch the battery, you have to a brand new 9-volt battery. After getting the brand new battery, observe these steps:
1. Take away the alarm from the ceiling or wall.
2. Use a screwdriver to take away the battery compartment cowl.
3. Disconnect the previous battery and join the brand new battery.
4. Substitute the battery compartment cowl.
5. Reinstall the alarm on the ceiling or wall.
After getting changed the battery, take a look at the alarm to verify it’s working correctly. To do that, press the take a look at button on the alarm. The alarm ought to sound a loud, piercing sound. If the alarm doesn’t sound, there could also be an issue with the alarm or the battery. On this case, you need to contact First Alert customer support for help.
Collect Important Instruments and Supplies
Getting ready the required instruments and supplies beforehand will guarantee a clean and environment friendly battery substitute course of to your First Alert smoke alarm. This is a complete record of what you may want:
Instruments:
- Phillips-head screwdriver: A #2 or #3 Phillips screwdriver is usually required to take away and exchange the alarm’s cowl or battery compartment.
- Needle-nose pliers (non-compulsory): Pliers could be useful for extracting the previous battery or reaching small, tight areas.
Supplies:
| Merchandise | Amount |
|---|---|
| 9-volt alkaline battery | 1 |
| Screws (in case your smoke alarm makes use of exterior screws) | 2 |
Be aware: Examine the particular mannequin of your First Alert smoke alarm for any variations in instruments or supplies required.
Extra Issues:
- Battery Kind: At all times use a contemporary 9-volt alkaline battery for optimum efficiency. Keep away from utilizing heavy-duty or rechargeable batteries.
- Battery Orientation: Be sure that the brand new battery is inserted with the right polarity (+ and -) as indicated within the battery compartment.
- Substitute Frequency: Comply with the producer’s suggestions for the frequency of battery substitute, usually inside 6 to 12 months.
Establish Smoke Alarm Mannequin and Battery Kind
Figuring out your First Alert smoke alarm mannequin is essential to find out the right battery sort. To do that:
- Find the smoke alarm unit.
- Take away the duvet or mounting bracket to reveal the unit’s again or base.
- The mannequin quantity will usually be printed on a label or stamped into the unit’s physique.
After getting the mannequin quantity, seek the advice of the desk beneath to seek out the corresponding battery sort:
| Smoke Alarm Mannequin | Battery Kind |
|---|---|
| SA300 | 9-volt alkaline battery |
| SA500 | 12-volt lithium-ion battery |
| SA600 | 6-volt lithium-ion battery |
| SA700 | 9-volt lithium-ion battery |
Find the Battery Compartment
Figuring out the battery compartment of your First Alert smoke alarm is essential for changing its energy supply. To do that, observe these steps:
- Take away the smoke alarm from the ceiling or wall: Gently twist the alarm counterclockwise till it detaches from its mounting base.
- Examine the alarm’s again panel: Search for a small, hinged door or panel that normally has a diagram of the battery compartment.
- Open the battery compartment: Use a flat-head screwdriver or a coin to rigorously pry open the compartment door. Be cautious to not injury the hinge or the compartment itself.
| Battery Compartment Location | Description |
|---|---|
| Again of the alarm, coated by a hinged door | Commonest location for battery entry |
| Aspect of the alarm, secured with a latch | Much less frequent, usually discovered on smaller or slimmer fashions |
| Contained in the alarm, accessible by way of a detachable cowl | Uncommon however discovered on some older fashions |
Disconnect the Alarm from the Ceiling
To disconnect the alarm from the ceiling, observe these steps:
-
Find the discharge tab or button on the again of the alarm.
-
Press and maintain the discharge tab or button whereas gently pulling the alarm down from the ceiling.
-
If the alarm is hardwired, you might have to disconnect the wires. To do that, use a screwdriver to loosen the screws holding the wires in place. Watch out to not contact any naked wires.
-
As soon as the alarm is disconnected from the ceiling, you’ll be able to proceed to interchange the battery.
Take away the Previous Battery
To take away the previous battery, you have to to find the battery compartment. That is usually discovered on the again of the smoke alarm. After getting positioned the battery compartment, you have to to make use of a screwdriver to take away the screws that maintain it in place. As soon as the battery compartment is open, you have to to disconnect the previous battery. To do that, you have to to squeeze the terminals of the battery and pull it out. As soon as the previous battery is eliminated, you have to to get rid of it correctly. Please observe all native laws concerning battery disposal.
1. Find the battery compartment.
The battery compartment is normally positioned on the again of the smoke alarm. It might be coated by a small plastic door.
2. Take away the battery compartment cowl.
Use a screwdriver to take away the screws that maintain the battery compartment cowl in place. The quilt ought to then come off simply.
3. Disconnect the previous battery.
Find the terminals of the previous battery. They’re normally positioned on the ends of the battery. Squeeze the terminals collectively and pull the battery out of the compartment.
4. Get rid of the previous battery.
Please observe all native laws concerning battery disposal. Generally, you’ll be able to get rid of previous batteries at your native recycling middle.
5. Insert the brand new battery.
Find the terminals of the brand new battery. They’re normally positioned on the ends of the battery. Align the terminals of the brand new battery with the terminals within the battery compartment. Push the brand new battery into the compartment till it clicks into place.
6. Substitute the battery compartment cowl.
Place the battery compartment cowl again on the smoke alarm. Safe it with the screws that you just eliminated earlier.
Set up the New Battery
1. Open the battery compartment by sliding the latch on the again of the alarm.
2. Take away the previous battery and get rid of it correctly.
3. Insert the brand new battery into the compartment, ensuring it’s oriented appropriately (+/-).
4. Slide the battery compartment door again on, ensuring it latches securely.
5. Check the alarm to verify it’s working correctly by urgent the take a look at button.
6. For 9-volt batteries, observe these further steps:
For 9-Volt Batteries
| Single 9-Volt Battery | 2-9-Volt Batteries | |
|---|---|---|
| Battery Compartment | Backside of Alarm | Again of Alarm |
| Polarity | Optimistic Terminal on High | Adverse Terminal on High |
| Battery-to-Battery Connection | Not Relevant | Optimistic Terminal to Adverse Terminal |
Check the Smoke Alarm
Most First Alert smoke alarms have a take a look at button that initiates a brief burst of smoke simulation, activating the alarm. It is best to take a look at your smoke alarm commonly to make sure correct operation.
| Month-to-month Testing |
|---|
| Press and maintain the take a look at button for 5-10 seconds. |
| Launch the button and pay attention for the alarm to sound. |
| If the alarm doesn’t sound, exchange the batteries instantly. |
Weekly Visible Inspection
Along with month-to-month testing, you need to visually examine your smoke alarm weekly to make sure there isn’t a seen injury, akin to cracks or holes within the housing, or proof of bugs or particles contained in the unit.
Annual Cleansing
Annually, vacuum the smoke alarm to take away mud and particles that will have accrued inside. Use a comfortable brush attachment to softly clear the outside surfaces, together with the take a look at button and any vents. Keep away from utilizing water or cleansing options on the smoke alarm.
Flip Off the Circuit Breaker
Earlier than you begin engaged on the smoke alarm, you may want to show off the circuit breaker that powers it. This may forestall you from getting shocked.
Take away the Smoke Alarm from the Ceiling
As soon as the circuit breaker is off, you’ll be able to take away the smoke alarm from the ceiling. Most smoke alarms are held in place by a twist-and-lock mechanism. Merely twist the smoke alarm counterclockwise to take away it.
Disconnect the Wires
As soon as the smoke alarm is faraway from the ceiling, you may have to disconnect the wires which are related to it. Most smoke alarms have two wires, a purple wire and a black wire. Merely use a screwdriver to loosen the screws that maintain the wires in place, after which pull the wires off of the terminals.
Take away the Previous Battery
As soon as the wires are disconnected, you’ll be able to take away the previous battery from the smoke alarm. Most smoke alarms use a 9-volt battery. Merely squeeze the battery holder tabs collectively and slide the previous battery out.
Insert the New Battery
Take the brand new 9-volt battery and insert it into the battery holder. Make it possible for the constructive (+) terminal of the battery is going through the constructive (+) terminal on the battery holder.
Reconnect the Wires
As soon as the brand new battery is inserted, you’ll be able to reconnect the wires to the smoke alarm. Merely push the wires onto the terminals and tighten the screws to carry them in place.
Substitute the Smoke Alarm on the Ceiling
As soon as the wires are reconnected, you’ll be able to exchange the smoke alarm on the ceiling. Merely twist the smoke alarm clockwise to lock it into place.
Reset the Alarm
|
As soon as the smoke alarm has been reinstalled, you may have to reset it. To reset the smoke alarm, press and maintain the take a look at button for five seconds. |
|
The smoke alarm will beep as soon as to point that it has been reset. |
|
It is best to now take a look at the smoke alarm to ensure that it’s working correctly. |
Reinstall the Alarm on the Ceiling
As soon as the brand new battery is put in, it is time to reinstall the alarm on the ceiling. Listed here are the detailed steps:
- Align the alarm’s mounting bracket with the holes on the ceiling.
- Press the alarm firmly towards the ceiling till it snaps into place.
- Safe the screws that maintain the mounting bracket to the ceiling.
- Be sure the alarm is degree and safe.
- Press the take a look at button to make sure the alarm is working correctly.
- If the alarm doesn’t sound, examine the battery connection and exchange the battery if vital.
- Shut the battery compartment cowl and safe it with the screw.
- You’ll want to take a look at the alarm month-to-month to make sure it’s functioning appropriately.
- Substitute the battery yearly or as advisable by the producer.
Extra Suggestions:
- Use the screws supplied with the alarm for the most effective match.
- If the ceiling is drywall, use plastic anchors to safe the screws.
- Think about using a step stool or ladder for simpler entry to the ceiling.
Doc the Battery Substitute
Documenting the battery substitute is vital for a number of causes:
– It offers a document of when the battery was changed, which could be useful for troubleshooting if the alarm malfunctions.
– It might probably enable you to preserve monitor of the age of the battery, so you already know when it must be changed once more.
– It may be useful if you’ll want to file a guaranty declare for the alarm.
10. Doc the Battery Substitute
After getting changed the battery, it is very important doc the substitute. You are able to do this by writing down the date, time, and kind of battery that you just put in. You can even take an image of the alarm with the brand new battery put in. Maintain this info in a protected place so to consult with it later if wanted.
| Date and Time | Kind of Battery | Image |
|---|---|---|
| [Date] | [Type of Battery] | [Image] |
Find out how to Substitute Battery on First Alert Smoke Alarm
Changing the battery on a First Alert smoke alarm is an easy activity that may be accomplished in only a few minutes. Comply with these steps to make sure your smoke alarm is at all times working correctly and defending your own home and household.
1. Take away the smoke alarm from its mounting bracket by twisting it clockwise.
2. Find the battery compartment on the again of the smoke alarm.
3. Use a small screwdriver or coin to open the battery compartment.
4. Take away the previous battery and insert a brand new 9-volt battery.
5. Shut the battery compartment and exchange the smoke alarm on its mounting bracket.
6. Check the smoke alarm by urgent the take a look at button.
Individuals Additionally Ask
How typically ought to I exchange the battery in my First Alert smoke alarm?
It is best to exchange the battery in your First Alert smoke alarm yearly, or extra typically if the alarm begins chirping intermittently. A low battery is without doubt one of the most typical causes for smoke alarms to fail, so it is vital to interchange the battery commonly.
The place can I discover a substitute battery for my First Alert smoke alarm?
You will discover substitute batteries for First Alert smoke alarms at most {hardware} shops, house enchancment shops, and on-line retailers. Be sure to pick out a 9-volt battery that’s designed to be used with smoke alarms.
What ought to I do if my First Alert smoke alarm is chirping?
In case your First Alert smoke alarm is chirping, it’s possible that the battery is low. Substitute the battery instantly and take a look at the smoke alarm to verify it’s working correctly. If the smoke alarm continues to chirp after changing the battery, there could also be an issue with the alarm and you need to contact First Alert for help.
