Are you struggling to take away the rear hatch door out of your 2006 Honda CRV? This complete information will offer you step-by-step directions and skilled suggestions that will help you full this activity effortlessly. With clear directions and detailed descriptions, you may be guided via the complete elimination course of, from disconnecting {the electrical} elements to unbolting the hinges.
Earlier than embarking on this challenge, be sure that you collect the mandatory instruments and supplies. You may want a set of metric wrenches, a Phillips-head screwdriver, a trim elimination device, and a security blanket or towels to guard your car from scratches. After you have all the things you want, it is time to dive into the elimination course of. Firstly, open your rear hatch and find the 2 bolts on the backside of the door, close to the hinges.
Utilizing a metric wrench, fastidiously loosen these bolts however don’t take away them fully. Subsequent, determine the higher bolts on the within of the hatch door, positioned close to the ceiling. Utilizing a Phillips-head screwdriver, unscrew these bolts and set them apart. With the bolts eliminated, you possibly can gently raise the rear hatch door upward and off the hinges. Be cautious because the door is heavy, and it is really useful to have somebody help you throughout this step. Lastly, disconnect {the electrical} connectors and wiring harness from the rear hatch door to fully free it from the car.
Security Precautions
1. Have interaction the parking brake and set the transmission to Park or impartial to stop the car from rolling.
Disconnect the battery
To keep away from any unintentional electrical shock, it’s important to disconnect the destructive terminal of the battery earlier than starting work on the rear hatch door.
Put on acceptable security gear
Relying on the precise restore or upkeep being carried out, it’s at all times advisable to put on acceptable security gear corresponding to gloves, security glasses, and protecting clothes to cut back the chance of harm.
Chock the wheels
Make sure the wheels reverse the aspect you’re engaged on are appropriately chocked to stop the car from transferring whereas the rear hatch door is eliminated.
Test for overhead obstructions
Earlier than eradicating the rear hatch door, test for any overhead obstructions within the work space to keep away from potential harm to the door or surrounding elements.
Gathering Crucial Instruments and Supplies
To take away the rear hatch door out of your 2006 Honda CR-V, you have to the next instruments and supplies:
Instruments:
- Flathead screwdriver
- Phillips head screwdriver
- Socket wrench
- Wrenches (varied sizes)
- 10mm socket
Supplies:
- New rear hatch door (if changing)
- Electrical tape
- Masking tape
- Physique panel adhesive (non-obligatory)
Further Instruments and Supplies for Step 2:
- Trim elimination device or plastic pry device
- Towel or blanket to guard the hatch door
- Assistant (non-obligatory)
| Merchandise | Amount |
|---|---|
| Flathead screwdriver | 1 |
| Phillips head screwdriver | 1 |
| Socket wrench | 1 |
| Wrenches (varied sizes) | As wanted |
| 10mm socket | 1 |
| New rear hatch door (if changing) | 1 |
| Electrical tape | 1 roll |
| Masking tape | 1 roll |
| Physique panel adhesive (non-obligatory) | 1 tube |
| Trim elimination device or plastic pry device | 1 |
| Towel or blanket | 1 |
Figuring out the Hatch Door Parts
Earlier than you start the elimination course of, it is important to determine the elements of the rear hatch door in your 2006 Honda CR-V. This is a breakdown of the important thing components:
1. Hatch Door
The hatch door is the biggest part of the meeting and the primary level of entry to the rear cargo space of the car. It is fabricated from sheet metallic and options a big window that gives rearward visibility.
2. Latch Meeting
The latch meeting is positioned on the within fringe of the hatch door and engages with the striker plate on the car’s physique to maintain the door closed. It consists of a deal with, a latch mechanism, and a striker plate.
3. Elevate Helps
The raise helps, also called “fuel struts” or “shock absorbers,” are positioned on both aspect of the hatch door and supply help when opening and shutting the door. They comprise pressurized fuel that exerts a pressure to lift and decrease the door easily and effortlessly.
| Part | Description |
|---|---|
| Hatch Door | Giant sheet metallic door offering entry to the rear cargo space. |
| Latch Meeting | Mechanism that connects the hatch door to the car’s physique, retaining it closed securely. |
| Elevate Helps | Gasoline-pressurized struts that help in easy opening and shutting of the hatch door. |
Disconnecting Electrical Connections
4. Disconnect {the electrical} connections to the rear hatch door. {The electrical} connections are positioned on the within of the hatch door, close to the highest. There are three electrical connectors that must be disconnected:
- The connector for the rear window defroster
- The connector for the license plate mild
- The connector for the rear door lock
To disconnect the connectors, merely squeeze the tabs on the perimeters of the connectors and pull them aside. Watch out to not harm the connectors or the wires.
Here’s a desk summarizing the steps for disconnecting {the electrical} connections:
| Step | Description |
|---|---|
| 1 | Find the three electrical connectors on the within of the hatch door, close to the highest. |
| 2 | For every connector, squeeze the tabs on the perimeters of the connector and pull it aside. |
| 3 | Watch out to not harm the connectors or the wires. |
Eradicating the Hatch Door Hinge Bolts
The following step is to take away the bolts that maintain the hatch door to the physique of the car. These bolts are positioned on the hinge brackets on the sides of the door.
Use a socket wrench to loosen the bolts sufficient in order that they are often eliminated by hand.
If the bolts are troublesome to take away, you might want to make use of a penetrating lubricant to assist loosen them. To do that, spray the lubricant onto the bolts and let it sit for a couple of minutes earlier than attempting to take away them.
Take care to not overtighten the bolts whenever you reinstall them. Overtightening can harm the hinge brackets or the threads on the bolts.
To take away the rear hatch door from a 2006 Honda CR-V, you have to to observe these steps:
1. Open the rear hatch door.
2. Find the 2 bolts that maintain the hatch door to the physique of the car. These bolts are positioned on the hinge brackets on the sides of the door.
3. Use a socket wrench to loosen the bolts sufficient in order that they are often eliminated by hand.
4. If the bolts are troublesome to take away, you might want to make use of a penetrating lubricant to assist loosen them.
5. Take away the bolts and raise the hatch door off the physique of the car.
| Bolts wanted | Location |
|---|---|
| 2 bolts | Hatch Hinge Brackets |
Lifting and Supporting the Hatch Door
Prioritize security by participating the parking brake and shifting the transmission into the park place. Find the 2 aspect struts (fuel springs) that help in lifting and holding the hatch door open. These struts are usually positioned on both aspect of the hatch, close to the hinges. Rigorously pry the spring retainer off the door hinge utilizing a flat-head screwdriver or a trim elimination device. Do that on either side.
Firmly grip the hatch door deal with and slowly raise it upward. The door will initially really feel heavy as a result of fuel struts. As you proceed lifting, the struts will prolong, aiding you in elevating the door absolutely open. As soon as the door is absolutely open, safe it within the raised place utilizing a assist rod or a brush deal with. This can stop the door from by chance closing when you work on it.
| Part | Location |
|---|---|
| Facet Struts (Gasoline Springs) | Close to the hinges, on both aspect of the hatch |
| Spring Retainer | Connected to the door hinge, holding the strut in place |
Eradicating the Struts and Springs
1. Security First
Earlier than you start, guarantee your Honda CR-V is parked on a stage floor and interact the parking brake. Disconnect the destructive terminal of the battery to stop electrical accidents.
2. Open the Rear Hatch
Elevate the rear hatch and safe it with a prop rod or bungee twine.
3. Take away the Higher Strut Mounts
Find the three bolts securing the higher strut mount to the car’s physique. Use a socket wrench to take away these bolts.
4. Help the Strut
Place a jack stand or sturdy piece of wooden beneath the strut to assist it as you take away the decrease mounts.
5. Take away the Decrease Strut Mounts
Find the 2 bolts securing the decrease strut mount to the knuckle. Use a socket wrench to take away these bolts.
6. Disconnect the Spring
Rigorously compress the spring utilizing spring compressors. As soon as the spring is compressed, take away the retaining clips and disconnect the spring from the strut.
7. Disassemble the Strut
- Take away the strut mount from the higher finish of the strut.
- Separate the suspension strut meeting from the coil spring.
- Take away the decrease spacer that matches between the coil spring and the strut.
- Unbolt and take away the mounting bracket that holds the brake line to the strut.
- Examine all elements for harm. If any elements are broken, they need to get replaced earlier than reinstalling the struts.
Detaching the Glass from the Door
Earlier than continuing, it is essential to make sure your security by carrying gloves to guard your arms from potential cuts or abrasions in the course of the course of.
Step 1: Find the bolts securing the glass to the body. Usually, there are 4 bolts evenly spaced across the internal edges of the body. Utilizing an acceptable wrench or socket set, fastidiously loosen and take away these bolts.
Step 2: As soon as all 4 bolts are eliminated, gently raise the glass straight up and out of the body. It could be barely heavy, so proceed with warning and guarantee a agency grip.
Step 3: Disconnect any electrical wires or connectors connected to the glass, corresponding to these for the defroster or rear window wiper. These connections could be discovered close to the bottom of the glass.
Step 4: Rigorously examine the rubber gasket across the glass’s perimeter to make sure it stays intact and correctly connected. If mandatory, exchange the gasket to take care of a watertight seal after reassembly.
Step 5: Set the glass apart in a safe location to stop harm whereas engaged on the hatch door.
Further Suggestions:
- It is really useful to have an assistant assist with lifting and dealing with the glass to reduce the chance of dropping or damaging it.
- For those who encounter any rusted or seized bolts, use penetrating oil or lubricant to assist loosen them earlier than making an attempt to take away them.
- Test the situation of the bolts and nuts earlier than reusing them. Exchange any broken or worn fasteners to make sure a safe match.
Eradicating the Door from the Automobile
9. Disconnect the wiring harness from the door. The wiring harness is positioned on the high of the door, close to the middle. To disconnect it, merely squeeze the discharge tab and pull the harness aside.
a) Find the wiring harness connector on the rear hatch door. It’s often positioned close to the highest of the door, on the driving force’s aspect.
b) Press the discharge tab on the connector and pull it aside. The wiring harness will now be disconnected from the door.
c) Rigorously disconnect another wires or hoses which may be related to the door.
d) Grip the door firmly on either side and raise it straight as much as take away it from the car.
Reinstalling the Rear Hatch Door
Comply with these steps to reinstall the rear hatch door:
1. Align the hatch door with the hinges on the car.
2. Elevate the door barely and information the hinge pins into the mounting holes on the hinges.
3. Push down on the door to totally have interaction the hinge pins.
4. Set up the highest bolts and tighten them to 22 Nm (16 ft-lbs).
5. Set up the underside bolts and tighten them to 30 Nm (22 ft-lbs).
6. Join {the electrical} connector for the rear hatch launch.
7. Test that the door is opening and shutting easily.
8. If nécessaire, modify the striker plate on the physique to make sure correct alignment.
9. Set up the tailgate trim panel and safe it with the screws.
10. Make sure the rear hatch operates easily by performing the next checks:Test Process Door alignment Open and shut the door a number of instances to test for any misalignment or binding. Door latch engagement Open and shut the door to make sure it latches securely and releases simply. Electrical operation Use the distant key fob or inside button to open and shut the hatch to confirm correct electrical perform. Weatherstripping seal Test the weatherstripping across the hatch door to make sure it’s correctly sealing to stop water leaks. How To Take away Rear Hatch Door From 2006 Honda Crv
To take away the rear hatch door from a 2006 Honda CRV, you have to the next instruments:
- 10mm socket wrench
- Phillips screwdriver
- Flathead screwdriver
After you have gathered your instruments, observe these steps:
- Open the rear hatch door and find the 2 10mm bolts on the highest of the door.
- Take away the 2 bolts.
- Find the 2 Phillips screws on the underside of the door.
- Take away the 2 screws.
- Find the 2 flathead screws on the perimeters of the door.
- Take away the 2 screws.
- Rigorously raise the rear hatch door off of the car.
Individuals Additionally Ask
How do I take away the rear hatch door panel on a 2006 Honda CRV?
To take away the rear hatch door panel on a 2006 Honda CRV, you have to the next instruments:
- Phillips screwdriver
- Flathead screwdriver
After you have gathered your instruments, observe these steps:
- Open the rear hatch door and find the 2 Phillips screws on the underside of the door panel.
- Take away the 2 screws.
- Find the 2 flathead screws on the perimeters of the door panel.
- Take away the 2 screws.
- Rigorously pry the door panel away from the door.
How do I exchange the rear hatch door lock actuator on a 2006 Honda CRV?
To switch the rear hatch door lock actuator on a 2006 Honda CRV, you have to the next instruments:
- 10mm socket wrench
- Phillips screwdriver
- Flathead screwdriver
- New rear hatch door lock actuator
After you have gathered your instruments, observe these steps:
- Open the rear hatch door and find the 2 10mm bolts on the highest of the door.
- Take away the 2 bolts.
- Find the 2 Phillips screws on the underside of the door.
- Take away the 2 screws.
- Find the 2 flathead screws on the perimeters of the door.
- Take away the 2 screws.
- Rigorously raise the rear hatch door off of the car.
- Find the rear hatch door lock actuator on the within of the door.
- Unplug {the electrical} connector from the lock actuator.
- Take away the 2 screws that maintain the lock actuator in place.
- Take away the outdated lock actuator and set up the brand new one.
- Tighten the 2 screws that maintain the lock actuator in place.
- Plug {the electrical} connector into the lock actuator.
- Reinstall the rear hatch door onto the car.
- Tighten the 2 10mm bolts on the highest of the door.
- Tighten the 2 Phillips screws on the underside of the door.
- Tighten the 2 flathead screws on the perimeters of the door.
