In case you’re trying to take away the captain’s chairs out of your BMW X7, you’ve got come to the appropriate place. On this article, we’ll stroll you thru the complete course of, from begin to end. We’ll give you all of the instruments and supplies you will want, in addition to step-by-step directions which can be simple to observe. So, whether or not you are a seasoned DIYer or an entire novice, you’ll take away the captain’s chairs out of your BMW X7 with none issues.
To start, you will want to assemble a number of instruments and supplies. These embrace a set of wrenches, a socket set, a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. You may additionally want a number of rags or towels to scrub up any spills. Upon getting your entire instruments and supplies gathered, you’ll be able to start the elimination course of. Moreover, you will have to take away the seat belt bolts. These are positioned on the aspect of the seat, close to the ground. As soon as you’ve got eliminated the seat belt bolts, you’ll be able to carry the seat out of the car.
Disconnecting the Battery
Earlier than starting any work on the BMW X7, it’s essential to disconnect the battery for security. This step isolates {the electrical} system, stopping any potential brief circuits or harm to elements.
To disconnect the battery, observe these detailed steps:
- Make sure the car is parked on a steady floor and the engine is turned off.
- Find the battery within the engine compartment, which is usually coated by a protecting casing.
- Establish the destructive terminal of the battery, marked with a “-” signal. Utilizing a 10mm wrench or socket, loosen the nut connecting the destructive battery cable to the terminal.
- Gently carry the destructive cable away from the terminal and safe it able the place it won’t by accident make contact.
- Repeat the method for the constructive terminal, marked with a “+” signal, by loosening the nut and disconnecting the constructive cable.
With the battery cables safely disconnected, {the electrical} system is now remoted, making certain a protected working atmosphere for eradicating the captain chairs.
Eradicating the Entrance Seats
Step 1: Disconnect the Battery
Earlier than starting any work, disconnect the destructive battery terminal to stop electrical shocks or harm to the car’s methods.
Step 2: Take away the Entrance Seat Bolts
Entrance Seat Bolt Places
| Bolt Location | Torque (Nm) |
|---|---|
| Entrance Left Facet | 60 |
| Entrance Proper Facet | 60 |
| Rear Left Facet | 60 |
| Rear Proper Facet | 60 |
Use a 17 mm socket or wrench to take away the 4 bolts that safe the seat to the ground. Watch out to not drop any of the bolts as they’re small and simply misplaced.
Disconnecting the Seat Adjuster
As soon as the bolts have been eliminated, use a flathead screwdriver to disconnect the seat adjuster from the seat. The seat adjuster is positioned on the entrance of the seat and is related by two plastic clips. Press down on the clips and pull the seat adjuster straight as much as disconnect it.
Lifting the Seat
With the seat adjuster disconnected, grasp the seat firmly and carry it straight as much as take away it from the car. Watch out because the seat is heavy and awkward to deal with. It’s endorsed to have an assistant make it easier to carry the seat to keep away from any accidents.
Eradicating the Rear Seats
To take away the rear seats, observe these steps:
- Find the 2 launch levers on the again of the entrance seats. Pull the levers up and ahead to launch the seats.
- Fold the entrance seats ahead and out of the best way.
- Find the 4 bolts that safe the rear seats to the ground. Use a socket wrench to take away the bolts.
- Fastidiously carry the rear seats up and out of the car.
Disconnecting the Electrical Connections
As soon as the rear seats are eliminated, you’ll need to disconnect {the electrical} connections. Observe these steps:
- Find {the electrical} connectors on the underside of the rear seats.
- Disconnect the connectors by urgent the discharge buttons and pulling them aside.
- Set the rear seats apart in a protected place the place they won’t be broken.
| Step | Description |
|---|---|
| 1 | Take away the 2 bolts that safe the seat belt buckle to the ground. |
| 2 | Unbolt the seat belt buckle from the seat base. |
| 3 | Find {the electrical} connector for the seat belt buckle and disconnect it. |
| 4 | Raise the seat belt buckle up and out of the car. |
Eradicating the Heart Console
Step 4: Eradicating the Heart Console Screws and Elements
As soon as the console trim has been eliminated, you’ll need to find and take away the screws that safe the middle console to the floorboard. These screws are usually Phillips head and may be loosened utilizing a screwdriver or socket wrench. As soon as the screws are eliminated, fastidiously carry the entrance of the console and disconnect {the electrical} connectors for the shifter, cup holders, and every other digital elements hooked up to the console.
Subsequent, take away the cup holder inserts and the rubber grommet positioned on the rear of the console. This may assist you to entry the screws that safe the middle console to the rear floorboard. Take away these screws and carry the console straight as much as separate it from the car. Watch out to not harm any of {the electrical} connectors or elements throughout this course of.
| Part | Location |
|---|---|
| Console Trim | Across the edges of the middle console |
| Screws Securing Console to Floorboard | Entrance and rear of the console, beneath the trim |
| Electrical Connectors | For the shifter, cup holders, and different digital elements |
| Cup Holder Inserts | Contained in the cup holders |
| Rubber Grommet | Rear of the console |
Eradicating the Facet Trim Panels
The aspect trim panels cowl the perimeters of the carpet and supply entry to the seat bolts. To take away them:
- Open the entrance doorways.
- Find the small plastic caps overlaying the trim panel bolts.
- Gently pry off the caps.
- Unscrew the uncovered bolts utilizing a 5mm hex key.
-
Fastidiously pull the trim panels in the direction of you and carry them upwards. The panels are held in place by clips, so some power could also be mandatory.
Trim Panel Variety of Bolts Entrance Left 2 Entrance Proper 2 Rear Left 1 Rear Proper 1 - As soon as the trim panels are eliminated, you’ll have entry to the seat bolts.
-
Take away the Headrests: Gently pull the headrests upwards to launch them from their sockets.
-
Unclip the Again Panel: Find the plastic clips holding the again panel of the seat in place. Use a trim elimination software or a flat-head screwdriver to fastidiously pry them open and detach the panel.
-
Disconnect the Lumbar Help: In case your captain chairs have lumbar assist, find {the electrical} connector and gently pull it aside to disconnect the ability provide.
-
Take away the Facet Bolsters: On each side of the seat, find the plastic clips holding the aspect bolsters in place. Use a trim elimination software or a flat-head screwdriver to fastidiously pry them open and detach the bolsters.
-
Unzip the Cushion: Find the zipper on the backside of the seat cushion and punctiliously unzip it in the direction of the again of the chair.
-
Take away the Seat Foam: As soon as the cushion is unzipped, fastidiously carry the froth padding out of the seat body.
-
Detaching the Facet Panels (300 phrases)
- Find the Torx Screws: Utilizing a T40 Torx screwdriver, take away the eight screws securing the aspect panels to the seat body.
- Gently Pry the Panels Away: Use a trim elimination software or a flat-head screwdriver to fastidiously pry the aspect panels away from the body. Begin from the underside and work your means upwards, being aware to not harm the panels or the material.
- Disconnect the Wiring: In case your captain chairs have power-adjustable options, corresponding to seat heaters or air flow, fastidiously disconnect {the electrical} connectors to launch the aspect panels utterly.
- Take away the Panels: As soon as all connections are severed, gently carry the aspect panels away from the seat body and set them apart fastidiously.
- 10mm socket wrench
- T30 Torx wrench
- 13mm socket wrench
- 15mm socket wrench
- 17mm socket wrench
- 19mm socket wrench
- 21mm socket wrench
- Phillips head screwdriver
- Flathead screwdriver
- Disconnect the battery earlier than starting any electrical work.
- Put on security glasses and gloves to guard your self from flying particles.
- Work in a well-ventilated space.
- Find the 2 bolts on the base of the chair. These bolts are normally coated by a plastic cap.
- Take away the plastic cap after which use a wrench to loosen the bolts.
- As soon as the bolts are unfastened, you’ll be able to carry the chair up and out of the car.
Eradicating the Captain’s Chair Body
Unbolting the Seat Body
Find the bolts securing the seat body to the ground. There are usually 4 bolts per body, positioned on the corners. Use a socket wrench to loosen and take away the bolts.
1. Lifting the Seat Body
Gently carry the seat body straight up. Watch out to not harm the ground or the seat body. If the body is caught, you could want to make use of a pry bar to fastidiously pry it unfastened.
2. Disconnecting the Electrical Cables
Disconnect any electrical cables which can be related to the seat body. These cables usually embrace the seat belt sensor, seat heater, and seat place reminiscence.
3. Eradicating the Headrest Posts
Find the headrest posts on both aspect of the seat body. Use a Torx wrench to loosen and take away the bolts that safe the posts. Pull the posts straight as much as take away them.
4. Eradicating the Seat Cushion
Find the levers on the entrance of the seat cushion. Pull the levers outwards to launch the seat cushion. Raise the cushion straight as much as take away it.
5. Eradicating the Seat Again
Find the bolts that safe the seat again to the seat body. There are usually two bolts per aspect. Use a socket wrench to loosen and take away the bolts. Pull the seat again straight as much as take away it.
6. Eradicating the Lumbar Help
In case your captain’s chair has a lumbar assist function, you’ll need to take away it earlier than you’ll be able to take away the seat body. The lumbar assist is usually hooked up to the seat again with two bolts. Use a socket wrench to loosen and take away the bolts. Pull the lumbar assist straight out to take away it.
| Device | Amount |
|---|---|
| Socket wrench | 1 |
| Torx wrench | 1 |
| Pry bar | (Non-compulsory) |
Detaching the Upholstery
Detaching the upholstery of the captain chairs requires meticulous care to stop harm to the material or underlying elements. This is an in depth information:
Detaching the aspect panels of the captain chairs is a fragile course of that requires endurance and precision. This is an in depth step-by-step information:
Putting in New Upholstery
1. Unbolt the Captain’s Chair
Use a 10mm socket and ratchet to unbolt the chair from the ground. There are 4 bolts, two on the entrance and two on the again.
2. Disconnect the Electrical Connectors
Fastidiously disconnect all {the electrical} connectors from the chair. These embrace the seatbelt, airbag, and energy controls.
3. Take away the Seat Cowl
Raise the back and front edges of the seat cushion to unhook the hog rings that safe the material. Fastidiously pull the material over the headrest and take away it.
4. Examine the Body
Examine the chair body for any harm or rust. If there may be any harm, it needs to be repaired earlier than putting in the brand new upholstery.
5. Set up the New Cowl
Place the brand new seat cowl over the body and hook it onto the hog rings. Pull the material tight and guarantee it’s securely fixed.
6. Join the Electrical Connectors
Join all {the electrical} connectors to the chair. Be certain that they’re securely related to stop any electrical points.
7. Bolt the Chair Again in Place
Bolt the chair again in place utilizing the 10mm socket and ratchet. Tighten the bolts securely however don’t overtighten.
8. Check the Chair
Sit within the chair and check the seatbelt, airbag, and energy controls. Guarantee every little thing is working accurately earlier than driving the car.
Instruments Required:
Security Precautions:
Reinstalling the Captain’s Chair Body
Now that the captain’s chair base has been eliminated, it is time to reinstall the body.
1. Find the 2 bolts that safe the entrance of the body to the ground.
2. Thread the bolts into place by hand, then tighten them utilizing a 13mm socket wrench.
3. Find the 2 bolts that safe the again of the body to the ground.
4. Thread the bolts into place by hand, then tighten them utilizing a 15mm socket wrench.
5. Find the 2 bolts that safe the aspect of the body to the B-pillar.
6. Thread the bolts into place by hand, then tighten them utilizing a 17mm socket wrench.
7. Find the bolt that secures the seat belt buckle to the body.
8. Thread the bolt into place by hand, then tighten it utilizing a 19mm socket wrench.
9. Join {the electrical} connector to the seat belt buckle.
| Shade | Pin | Perform |
|---|---|---|
| Black | 1 | Floor |
| Inexperienced/Violet | 2 | Pretensioner |
| Inexperienced/Yellow | 3 | Buckle change |
| Brown/White | 4 | Airbag |
| Brown/Black | 5 | Airbag |
| Blue/Crimson | 6 | Seat belt minder |
| Blue/Black | 7 | Seat belt minder |
10. Find the 2 bolts that safe the seat to the body.
11. Thread the bolts into place by hand, then tighten them utilizing a 21mm socket wrench.
12. Reconnect the seat belt to the buckle.
13. Set up the headrest.
14. Reconnect the battery.
Reassembling the Inside
Now that the captain’s chair has been eliminated, it is time to reassemble the inside. Observe these steps fastidiously to make sure a correct set up:
| Step | Description |
|---|---|
| 1 | Set up the brand new captain’s chair again into its unique place. |
| 2 | Safe the chair utilizing the bolts that had been eliminated earlier. Tighten the bolts securely. |
| 3 | Join the wiring harness to the chair. |
| 4 | Set up the ground mat over the uncovered space the place the captain’s chair was eliminated. |
| 5 | Reinstall the middle console. |
| 6 | Safe the middle console utilizing the bolts that had been eliminated earlier. |
| 7 | Join the wiring harness to the middle console. |
| 8 | Set up the dashboard trim. |
| 9 | Safe the dashboard trim utilizing the clips that had been eliminated earlier. |
| 10 | Fastidiously examine the inside to make sure that all elements are correctly put in and safe. Pay shut consideration to the next areas: |
| – Be certain that the captain’s chair is securely mounted and doesn’t wobble. | |
| – Verify that each one wiring harnesses are related correctly and there are not any unfastened wires. | |
| – Examine all trim items and guarantee they’re accurately aligned and secured. | |
| – Confirm that the ground mat is securely in place and doesn’t intrude with any controls. | |
| 11 | As soon as glad with the reassembly, check the performance of the captain’s chair and all different inside elements to make sure they’re working accurately. |
How To Take away Bmw X7 Captain Chair Elimination
To take away the captain’s chair in a BMW X7, you’ll need to observe these steps:
Folks Additionally Ask
How do you take away the again seat of a BMW X7?
To take away the again seat of a BMW X7, you’ll first have to fold down the seats. As soon as the seats are folded down, you’ll need to find the 2 bolts which can be positioned on the base of every seat. As soon as the bolts are eliminated, it is possible for you to to carry the seat up and out of the car.
How do you take away the third row of seats in a BMW X7?
To take away the third row of seats in a BMW X7, you’ll first have to fold down the seats. As soon as the seats are folded down, you’ll need to find the 2 bolts which can be positioned on the base of every seat. As soon as the bolts are eliminated, it is possible for you to to carry the seat up and out of the car.
