Embark on a meticulous journey of including the ultimate touches to your cherished quilt by mastering the artwork of quilt binding. This intricate course of transforms a mere assortment of material squares right into a cohesive murals, elevating its magnificence and sturdiness. Whether or not you are a seasoned quilter or an keen novice, this complete information will empower you with the data and strategies to create an impeccable quilt binding that may stand up to the take a look at of time.
Quilt binding serves a twin goal: it protects the quilt’s edges from fraying and enhances its visible enchantment. By fastidiously deciding on materials that complement the quilt’s design, you’ll be able to create a harmonious and attention-grabbing border that enhances the general aesthetic. Moreover, the binding method you select can add a singular contact to your quilt, reflecting your private model and creativity.
Earlier than embarking on the binding course of, collect your important instruments and supplies. These embrace the quilt, quilt binding cloth, measuring tape, scissors, needle, thread, and an iron. As soon as ready, you may embark on a step-by-step course of that entails measuring, reducing, stitching, and urgent the binding strips to attain a seamless and safe end. The outcome will probably be a quilt that exudes each class and longevity, able to be treasured for generations to return.
Gathering Obligatory Supplies
Earlier than embarking on the duty of binding your quilt, it is important to assemble all the required supplies to make sure a easy and profitable course of. Here is an in depth listing of every little thing you may want:
Material
- Binding cloth: Select a cloth that enhances the quilt prime and batting. It ought to be sturdy and have a slight sheen for knowledgeable end.
- Backing cloth: This cloth will probably be hooked up to the again of the quilt, offering further help and a completed edge. Choose a cloth that matches the binding cloth or enhances it harmoniously.
Notions
- Rotary cutter: A rotary cutter gives precision and ease when reducing cloth strips for the binding.
- Ruler: Use a quilting ruler to measure and lower the material precisely.
- Thread: Select a thread that matches the colour of the binding cloth for a seamless look.
- Needles: Use needles particularly designed for machine quilting, sometimes measurement 70/10 or 80/12.
- Iron: An iron is important for urgent the binding cloth and seams to create a crisp and polished end.
- Pins or clips: These are used to safe the binding cloth quickly earlier than stitching.
- Bias tape maker: An optionally available device that can be utilized to create double-fold bias tape for the binding, eliminating the necessity for guide folding.
Instruments
- Stitching machine: A stitching machine is indispensable for stitching the binding to the quilt.
- Strolling foot: This presser foot helps to evenly feed the material layers by way of the machine, guaranteeing a constant sew.
- Measuring tape or yardstick: Use this device to measure the quilt’s perimeter and lower the binding strips precisely.
- Scissors: Sharp scissors are important for trimming extra cloth and shaping the binding corners.
Measuring and Slicing the Binding Strips
### Figuring out the Size of the Strips
To find out the size of the binding strips, measure across the total perimeter of the quilt, together with the corners. Add 10-12 inches to permit for overlap and becoming a member of the strips.
### Width of the Strips
The width of your binding strips will depend on the specified completed measurement. A regular width is 2.5 inches. Nonetheless, you’ll be able to select a wider or narrower width to fit your private choice.
### Slicing the Strips
1. Fold your cloth in half lengthwise, selvage edges collectively.
2. Measure and lower the strips perpendicular to the fold. For a 2.5-inch broad binding, lower the strips 5 inches broad.
3. Reduce sufficient strips to succeed in the full size you decided in step 1.
### Becoming a member of the Strips
1. Place the ends of two binding strips proper sides collectively, overlapping the ends by 1 inch.
2. Sew the strips collectively utilizing a 1/4-inch seam allowance. Press the seam open.
3. Repeat this course of till all the strips are joined into one lengthy strip.
Suggestions
* Use a rotary cutter and a quilting ruler for exact reducing.
* If you do not have sufficient cloth to chop the binding strips in a single piece, you’ll be able to piece them collectively. Simply make sure you match the seams fastidiously and press them open.
* If you need a double-faced binding, lower the strips twice the specified width and stitch them collectively earlier than reducing them into particular person strips.
| Width of Binding | Completed Width |
|—|—|
| 2.5 inches | 1 inch |
| 3 inches | 1.5 inches |
| 3.5 inches | 2 inches |
Becoming a member of the Binding Strips
To hitch the binding strips, observe these steps:
Step 1: Measure and Reduce the Strips
Decide the circumference of your quilt and add 10-15% for overlap and shrinkage. Reduce strips of binding cloth which might be 2.5 inches broad and lengthy sufficient to succeed in the specified size.
Step 2: Sq. Up the Ends
Fold one finish of a strip over itself by 1/2 inch and press. Unfold and fold the other finish over the pressed edge by 1/2 inch, making a sq. nook. Press and trim any extra cloth.
Step 3: Becoming a member of the Strips
Place the squared ends of two strips collectively, overlapping them by 1/2 inch. Use a mitered nook device or ruler to information you in aligning the strips completely.
Sew throughout the seam, beginning 1/4 inch from the sting and ending 1/4 inch from the other edge. Backstitch at each ends.
Proceed becoming a member of strips on this method till you may have one lengthy strip that’s lengthy sufficient to bind all the quilt.
| Step | Description |
|---|---|
| 1 | Measure and lower the strips. |
| 2 | Sq. up the ends. |
| 3 | Be part of the strips utilizing a mitered nook device or ruler. |
Attaching the Binding to the Quilt Edge
1. Trim the Quilt
Utilizing a pointy rotary cutter and ruler, trim any extra batting or backing from the perimeters of the quilt. This can guarantee a clear, even end once you connect the binding.
2. Fold the Binding in Half
Lay the binding strip flat and fold it in half lengthwise, mistaken sides collectively. Press the fold with an iron to create a pointy crease.
3. Align the Binding to the Quilt Edge
Open up the folded binding and align the uncooked fringe of the binding strip with the trimmed fringe of the quilt, proper sides collectively. Pin the binding to the quilt, spacing the pins evenly alongside the sting.
4. Machine Sew the Binding to the Quilt
Technique 1: Single-Fold Binding
- Machine sew alongside the folded fringe of the binding, near the crease.
- Use a sew size of two.5-3 mm and a needle place in the course of the binding.
- Trim the surplus binding on the corners to forestall bulk.
Technique 2: Double-Fold Binding
- Fold the stitched binding over the uncooked fringe of the quilt and pin in place.
- Machine sew alongside the folded fringe of the binding, near the crease.
- Trim the surplus binding on the corners to forestall bulk.
Technique 3: Bias Binding
- Fold the binding over the uncooked fringe of the quilt and pin in place.
- Machine sew alongside the folded fringe of the binding, near the crease.
- Trim the surplus binding on the corners to forestall bulk.
| Technique | Needle Place | Sew Size |
|---|---|---|
| Single-Fold Binding | Center of binding | 2.5-3 mm |
| Double-Fold Binding | Fold line of binding | 2.5-3 mm |
| Bias Binding | Fold line of binding | 2.5-3 mm |
5. Miter the Corners
-
For Single-fold or Double-Fold Binding:
- Fold the binding at a 45-degree angle on the nook.
- Pin the folded binding to the quilt, aligning the perimeters.
- Sew throughout the folded nook.
- Trim any extra binding and press the nook flat.
-
For Bias Binding:
- Fold the binding at a 45-degree angle on the nook.
- Pin the folded binding to the quilt, aligning the bias edge with the quilt edge.
- Sew throughout the folded nook, ensuring to catch each the quilt and the binding.
- Trim any extra binding and press the nook flat.
Mitering the Corners
Correctly mitering the corners ensures a neat and professional-looking end in your quilt binding. To realize excellent miters, observe these detailed steps:
1. Measure and Mark the Fold Line
Measure 2 1/4 inches from the folded fringe of the binding strip and mark a line perpendicular to the fold. This line will point out the place to chop the miter.
2. Fold the Binding in Half
Fold the binding strip in half, proper sides collectively, aligning the marked fold line with the other uncooked edge. Press the fold to create a pointy crease.
3. Make Diagonal Cuts
Beginning on the marked fold line, lower diagonally in the direction of the uncooked fringe of the binding, stopping about 1/4 inch from the sting. Repeat on the opposite facet, creating two diagonal cuts.
4. Unfold the Binding
Unfold the binding and fold down the triangle shaped by the diagonal cuts. Match the uncooked edges of the binding strips and pin them collectively on the level the place the diagonal cuts intersect.
5. Reinforce the Mitered Nook
To make sure a safe and sturdy mitered nook, it is important to bolster it. You are able to do this in a number of methods:
| Technique | Steps |
|---|---|
| Hand Stitching | Use a ladder sew to fastidiously sew the mitered nook by hand, securing it firmly in place. |
| Machine Stitching | Use a small zigzag sew to stitch across the mitered nook, reinforcing it and stopping fraying. |
| Material Glue | Apply a small quantity of material glue to the nook and press it firmly to safe it. |
Handstitching the Binding
Step 1: Put together the Binding
Trim any extra batting or backing cloth from the perimeters of the quilt. Flip the binding to the mistaken facet of the quilt and align the uncooked fringe of the binding with the uncooked fringe of the quilt prime. Pin the binding in place.
Step 2: Sew the Binding
Begin within the middle of 1 facet and backstitch about 1/2 inch. Sew alongside the binding, catching the quilt prime and again by way of all layers. Use a small sew size, about 10-12 stitches per inch.
Step 3: Safe the Binding
If you attain the tip of 1 facet, fold the tip of the binding underneath and sew it right down to the quilt. The next are other ways to safe the Binding:
| Technique | Directions |
|:———|:———|
| Blind Sew | Use a small needle and thread to take tiny stitches by way of the binding and the quilt prime, barely catching the quilt again. This creates an almost invisible seam.|
| Ladder Sew | Fold the binding over and sew it down with small, even stitches that resemble a ladder. This technique is extra seen than the blind sew however can also be safer.|
| Blanket Sew | Fold the binding over and sew it down with a collection of small, ornamental stitches. This technique creates an ornamental edge on the quilt.|
Step 4: Miter the Corners
To create a neat nook, fold the binding over at a 45-degree angle on the level the place the 2 sides meet. Trim the surplus binding, leaving about 1/2 inch overlap. Fold the overlapping binding over and sew it right down to the quilt.
Step 5: End the Binding
Proceed stitching across the quilt, securing the binding as you go. If you attain the start line, fold the tip of the binding underneath and sew it right down to the quilt.
Step 6: Ending Touches
Use a needle and thread to sew down any free threads or corners. Trim any extra thread. Press the quilt to set the binding and provides it knowledgeable end.
Machine Stitching the Binding
As soon as the binding has been folded and pressed, it is time to sew it in place. This may be achieved both by hand or machine. Machine stitching is a fast and straightforward method to safe the binding.
7. Sew the Binding to the Quilt
To sew the binding to the quilt, you have to a stitching machine with a strolling foot. A strolling foot helps to feed the material evenly by way of the machine, which prevents the binding from puckering.
- Place the quilt on a flat floor and unfold the binding in order that it’s even with the sting of the quilt.
- Begin stitching at one nook of the quilt. Fold underneath the uncooked fringe of the binding and sew it down alongside the sting of the quilt. Ensure that the stitches are small and even.
- Proceed stitching all the way in which across the quilt, mitering the corners as wanted. To miter a nook, fold the binding in half and press it. Unfold the binding and align the uncooked edges with the perimeters of the quilt. Sew alongside the fold to safe the miter.
- After you have stitched all the way in which across the quilt, trim any extra binding. Fold the binding over to the again of the quilt and sew it down by hand or machine.
Here’s a desk summarizing the steps for machine stitching the binding:
| Step | Description |
|---|---|
| 1 | Place the quilt on a flat floor and unfold the binding in order that it’s even with the sting of the quilt. |
| 2 | Begin stitching at one nook of the quilt. Fold underneath the uncooked fringe of the binding and sew it down alongside the sting of the quilt. Ensure that the stitches are small and even. |
| 3 | Proceed stitching all the way in which across the quilt, mitering the corners as wanted. |
| 4 | After you have stitched all the way in which across the quilt, trim any extra binding. Fold the binding over to the again of the quilt and sew it down by hand or machine. |
Urgent the Binding
As soon as you’ve got sewn the binding to the quilt, it is time to press it. This can assist to set the sew line and provides the binding a pleasant, completed look. Here is methods to do it:
1. Set Your Iron
Set your iron to the temperature that’s acceptable for the material of your binding. When you’re undecided, begin with a low setting and regularly enhance the warmth till the material begins to easy out.
2. Press the Binding
Press the binding flat in opposition to the quilt, utilizing a lightweight contact. Keep away from urgent too exhausting, as this could distort the quilt. Press the binding all the way in which across the quilt, taking care to get into all of the corners and curves.
3. Fold the Binding Over and Press
As soon as you’ve got pressed the binding flat, fold it over to the again of the quilt and press it once more. This can assist to safe the binding and provides it a completed look.
4. Fold the Binding Again Over and Press
Fold the binding again over to the entrance of the quilt and press it once more. That is the ultimate step in urgent the binding, and it’ll assist to make it look good and neat.
5. Topstitch the Binding
Earlier than you topstitch the binding, be sure that it’s mendacity flat in opposition to the quilt and that there aren’t any wrinkles. Topstitch the binding across the quilt, utilizing a small sew size and a needle that’s acceptable for the material of the binding.
6. Trim the Extra Threads
As soon as you’ve got topstitched the binding, trim any extra threads. This can give the quilt a clear, completed look.
7. Get pleasure from Your Quilt
Now that you’ve got pressed the binding, your quilt is completed! Get pleasure from your lovely new murals.
| Iron Setting | Material Sort |
|---|---|
| Low | Delicate materials, equivalent to silk or organza |
| Medium | Most cotton materials |
| Excessive | Heavy materials, equivalent to denim or canvas |
Including Ornamental Stitching
As soon as you’ve got completed binding the quilt, you’ll be able to add ornamental stitching to offer it a private contact. Here is a step-by-step information:
- Select a sew sample: There are various totally different sew patterns you’ll be able to select from, equivalent to a straight sew, zigzag sew, or ornamental sew. Choose one that enhances the quilt’s design and cloth.
- Regulate the sew settings: In your stitching machine, alter the sew size and width to go well with the dimensions and cloth of the quilt. For a refined impact, use a shorter sew size and narrower width. For a bolder impact, use an extended sew size and wider width.
- Take a look at the stitching: Earlier than stitching on the quilt, take a look at the sew sample on a scrap of material to make sure it seems to be the way you need it to.
- Begin stitching: Start stitching alongside the sting of the binding, near the seam. Sew across the total quilt, taking care to observe the curve of the binding.
- Safe the stitching: As soon as you’ve got stitched across the quilt, safe the stitching by backstitching for just a few stitches.
- Trim the threads: Trim the surplus threads from the start and finish of the stitching.
- Press the binding: Use a heat iron to press the binding flat, together with the ornamental stitching.
- Get pleasure from your completed quilt: Your quilt is now full with an attractive ornamental stitching that provides a singular contact.
| Sew Sample | Description |
|---|---|
| Straight sew | A easy, straight line sew that can be utilized for a refined impact. |
| Zigzag sew | A sew that creates a zigzag sample, including a little bit of texture to the binding. |
| Ornamental sew | A sample that provides a extra elaborate design to the binding, equivalent to a wave or flower sample. |
Ending the Quilt
Stitching on the Binding
Fold the binding strip in half lengthwise and press. Open the binding strip and fold every uncooked edge into the middle crease. Press once more. Beginning on the middle of 1 facet of the quilt, pin the binding to the uncooked fringe of the quilt, matching the uncooked edges. Sew the binding to the quilt utilizing a 1/4-inch seam allowance.
Mitering the Corners
To miter the corners, sew the binding to the quilt till you attain the nook. Cease stitching and depart a 2-inch tail. Fold the binding strip again on itself at a 45-degree angle, aligning the uncooked fringe of the binding strip with the uncooked fringe of the quilt. Trim the surplus binding strip. Unfold the binding strip and press the miter. Proceed stitching the binding to the quilt, ranging from the purpose the place you left off.
Ending the Binding
After you have sewn the binding all the way in which across the quilt, fold the uncooked fringe of the binding to the again of the quilt and press. Topstitch the binding to the quilt, near the sting, utilizing a blind hem sew or a small zigzag sew. Trim any extra binding strip.
Hand-Sewn Binding
When you desire, you’ll be able to hand-sew the binding to the quilt. Use a small, sharp needle and thread that matches the colour of the binding. Sew the binding to the quilt utilizing a whip sew or a blind sew.
Desk: Binding Stitches
| Sew | Description |
|---|---|
| Blind hem sew | A sew that creates an almost invisible seam on the correct facet of the material. |
| Small zigzag sew | A sew that creates a powerful, sturdy seam that’s barely seen on the correct facet of the material. |
| Whip sew | A sew that’s used to stitch two items of material collectively by hand. |
| Blind sew | A sew that’s used to stitch two items of material collectively by hand, creating an almost invisible seam. |
How To Put On A Quilt Binding
Placing on a quilt binding is an effective way to complete off your quilt and provides it a cultured look. It might additionally assist to guard the perimeters of your quilt from fraying. There are just a few other ways to placed on a quilt binding, however the most typical technique is to make use of a machine. Listed below are the steps on methods to placed on a quilt binding by machine:
- Reduce your binding strips to the specified width. The width of your binding strips will rely upon the dimensions of your quilt and the look you need.
- Sew the binding strips collectively finish to finish to create one lengthy strip.
- Fold the binding strip in half lengthwise and press it. This can assist to create a crease that may make it simpler to stitch the binding to the quilt.
- Pin the binding to the sting of the quilt, proper sides collectively. Begin on the middle of 1 facet and work your manner across the quilt.
- Sew the binding to the quilt utilizing a 1/4-inch seam allowance. Remember to catch the folded fringe of the binding in your stitches.
- Fold the binding to the again of the quilt and miter the corners. To miter a nook, fold the binding at a 45-degree angle and trim the surplus cloth. Then, unfold the binding and fold it again over the nook. Sew the binding down, catching the mitered nook in your stitches.
- Proceed stitching the binding across the quilt, mitering the corners as you go.
- After you have sewn the binding all the way in which across the quilt, fold the ends of the binding collectively and stitch them collectively to create a mitered nook. This can full the binding.
Listed below are some ideas for placing on a quilt binding:
- Use a pointy needle and thread that matches the colour of your binding cloth.
- Sew slowly and thoroughly, taking care to catch the folded fringe of the binding in your stitches.
- Miter the corners precisely to create a professional-looking end.
- Press the binding as you go to assist it lay flat.
Individuals Additionally Ask About How To Put On A Quilt Binding
How do you bind a quilt by hand?
To bind a quilt by hand, you have to a needle, thread, and quilt binding. Reduce the binding strips to the specified width and stitch them collectively finish to finish to create one lengthy strip. Fold the binding strip in half lengthwise and press it. Pin the binding to the sting of the quilt, proper sides collectively. Begin on the middle of 1 facet and work your manner across the quilt. Sew the binding to the quilt utilizing a small, even sew. Fold the binding to the again of the quilt and miter the corners. To miter a nook, fold the binding at a 45-degree angle and trim the surplus cloth. Then, unfold the binding and fold it again over the nook. Sew the binding down, catching the mitered nook in your stitches.
What’s one of the best ways to placed on quilt binding?
The easiest way to placed on quilt binding is to make use of a machine. This can assist to make sure that the binding is sewn on evenly and securely. Nonetheless, you may also bind a quilt by hand if you happen to desire.
How do you miter quilt binding corners?
To miter quilt binding corners, fold the binding at a 45-degree angle and trim the surplus cloth. Then, unfold the binding and fold it again over the nook. Sew the binding down, catching the mitered nook in your stitches.
What’s the greatest kind of material for quilt binding?
The most effective kind of material for quilt binding is a light-weight cloth that’s simple to work with. Some widespread selections embrace cotton, cotton blends, and voile.
