Embark on a exceptional journey to reinforce the visible prowess of your Atomos Shinobi. By integrating customized Look Up Tables (LUTs), you may unlock a world of transformative shade grading prospects, turning your footage right into a cinematic masterpiece. On this complete information, we’ll meticulously information you thru the method of putting in LUTs in your Shinobi, empowering you to raise your visible storytelling to new heights.
To start the set up, set up a connection between your Shinobi and a pc. Make the most of the supplied USB cable to bridge the hole between these two gadgets. As soon as a seamless connection is established, navigate to the inner storage drive of your Shinobi. Throughout the drive, find and open the “LUTS” folder, which serves because the designated repository for customized LUTs.
The method of including LUTs is remarkably easy. Merely switch the specified LUT information, usually bearing the “.dice” extension, into the “LUTS” folder. Upon profitable switch, the Shinobi will mechanically detect and index the brand new LUTs, making them available to your artistic endeavors. With the LUTs at your disposal, now you can effortlessly apply them to your footage, unleashing a spectrum of vibrant colours, enhanced distinction, and tailor-made aesthetics. Embrace the transformative energy of LUTs and elevate your cinematic creations to unprecedented heights.
Importing LUTs through USB Drive
Enhancing your Atomos Shinobi with customized LUTs through a USB drive is a breeze. To embark on this course of, observe these meticulously detailed steps:
1. Collect Your Supplies:
Earlier than delving into the set up course of, guarantee you’ve got the next objects at your disposal:
– Atomos Shinobi
– USB drive formatted in FAT32 or exFAT
– LUT information in .dice format
2. Put together the USB Drive:
Start by creating a brand new folder in your USB drive and naming it “LUTs.” Switch your required LUT information into this devoted folder. Make sure that the LUT information are within the .dice format for compatibility with the Atomos Shinobi.
3. Join and Import LUTs:
Join the USB drive to your Shinobi utilizing the supplied USB-C cable. Navigate to the Enter/Output menu on the Shinobi’s show and choose the USB drive because the enter supply. Throughout the USB drive menu, find and open the “LUTs” folder containing your LUT information. Choose the specified LUT file and press the “Import” button. The Shinobi will import the LUT and retailer it in its inner reminiscence for future use.
Putting in LUTs from an SD Card
To put in LUTs from an SD card, observe these steps:
1. Put together your SD card
Format an SD card as FAT32. Create a folder on the SD card named “LUTS”.
2. Copy the LUT information to the SD card
Copy the LUT information (.dice or .3dl information) to the “LUTS” folder on the SD card.
3. Insert the SD card into the Shinobi
Insert the SD card into the Shinobi’s SD card slot. The Shinobi will mechanically detect the LUT information on the SD card.
3.1. Importing LUTs from the SD card
To import LUTs from the SD card:
- Navigate to the “Settings” menu on the Shinobi.
- Choose the “LUT” tab.
- Choose the “Import LUTs” possibility.
- Choose the “SD Card” possibility.
- Choose the LUTs you wish to import.
- Click on the “Import” button.
3.2. Making use of LUTs to footage
To use LUTs to footage:
- Within the “Settings” menu, choose the “LUT” tab.
- Choose the LUT you wish to apply.
- Click on the “Apply” button.
Copying LUTs through File Switch Protocol (FTP)
Transferring LUTs to your Atomos Shinobi by way of FTP lets you use a wide range of customized shade profiles. Here is a step-by-step information:
- Allow FTP in your Atomos Shinobi by going to the “Community” menu and choosing “Allow FTP Server”.
- Join your Shinobi to a Wi-Fi community or use an Ethernet cable.
- Receive the Shinobi’s IP deal with from the show.
- Utilizing an FTP shopper corresponding to FileZilla, enter the Shinobi’s IP deal with into the “Host” subject and hook up with the gadget:
FTP Settings Shinobi Host [Shinobi’s IP Address] Username admin Password atomos123 Port 21 - Within the FTP shopper, navigate to the “LUTs” folder in your Shinobi (normally situated at /mnt/information/LUTs).
- Drag and drop the specified LUT information out of your laptop to the “LUTs” folder on the Shinobi.
- The Shinobi will mechanically import the LUT information and make them obtainable to be used in your tasks.
Loading LUTs through the Atomos Cloud
The Atomos Cloud supplies a handy strategy to load LUTs onto your Shinobi monitor. Observe these steps to get began:
- Create an Atomos Cloud account and log in.
- Choose “LUTs” from the menu.
- Click on “Add LUT” and choose the LUT file you wish to add.
- As soon as the LUT is uploaded, it will likely be obtainable within the “My LUTs” part.
- In your Shinobi monitor, go to the “Setup” menu and choose “LUTs.”
- Beneath “Cloud LUTs,” choose the LUT you wish to load.
Importing Customized LUTs
Along with the LUTs supplied by Atomos, you too can add your individual customized LUTs to the Atomos Cloud. Here is how:
- Create a brand new LUT file in a suitable format (e.g., .dice, .3dl).
- Log into your Atomos Cloud account and choose “LUTs” from the menu.
- Click on “Add LUT” and choose the choice to add a customized LUT.
- Navigate to the placement of your LUT file and choose it.
- As soon as the LUT is uploaded, it will likely be obtainable within the “My LUTs” part.
Customized LUTs (.dice & .3dl codecs)
The Atomos Shinobi helps customized LUTs within the .dice and .3dl codecs. These LUTs will be created utilizing third-party software program or downloaded from on-line assets. To load a customized LUT, observe these steps:
- Create a LUT file in both the .dice or .3dl format.
- Copy the LUT file to the “LUTs” folder in your Shinobi’s microSD card.
- In your Shinobi monitor, go to the “Setup” menu and choose “LUTs.”
- Beneath “Customized LUTs,” choose the LUT you wish to load.
LUTs Desk
| LUT Format | Bit Depth | Shade Area |
|---|---|---|
| .dice | 10-bit or 12-bit | Log or linear |
| .3dl | 10-bit or 12-bit | Log or linear |
Observe: The Shinobi helps 3D LUTs with a dimension of 17x17x17 or 33x33x33.
Utilizing the LUT Picker Menu
To entry the LUT Picker menu, press the ‘MENU’ button on the Shinobi. Then, navigate to the ‘Instruments’ tab and choose ‘LUT Picker’.
The LUT Picker menu will show an inventory of accessible LUTs. To load a LUT, merely spotlight it and press the ‘ENTER’ button.
As soon as a LUT has been loaded, it will likely be utilized to all incoming footage. You may preview the consequences of the LUT by urgent the ‘PLAY’ button.
Loading Customized LUTs
You too can load customized LUTs onto the Shinobi. To do that, you’ll need to create a LUT file in a suitable format, corresponding to .dice or .3dl.
Upon getting created a LUT file, you may switch it to the Shinobi utilizing a USB drive. To do that, join the USB drive to the Shinobi and navigate to the ‘IMPORT’ folder. Then, copy the LUT file to the ‘LUTS’ folder.
As soon as the LUT file has been copied, you may entry it from the LUT Picker menu. Merely navigate to the ‘Customized’ tab and choose the LUT file.
LUT Picker Menu Settings
The LUT Picker menu affords a wide range of settings that assist you to customise the way in which LUTs are utilized. These settings embody:
| Setting | Description |
|---|---|
| LUT Mode | Determines how the LUT is utilized to the footage. Choices embody ‘Full’, ‘Half’, and ‘Off’. |
| LUT Energy | Adjusts the depth of the LUT. |
| LUT Preview | Permits or disables the LUT preview. |
Customizing LUT Collections
The Atomos Shinobi lets you customise your LUT collections to fit your preferences and workflow. Observe these steps to import customized LUTs and create your individual collections:
1. Obtain LUT Recordsdata
Purchase LUT information from trusted sources or create your individual utilizing shade grading software program.
2. Copy LUT Recordsdata
Copy the LUT information to a USB drive.
3. Format USB Drive
Format the USB drive as FAT32 to make sure compatibility with the Shinobi.
4. Insert USB Drive
Insert the USB drive into the Shinobi’s USB port.
5. Entry LUT Menu
On the Shinobi’s fundamental menu, navigate to “Settings” > “LUTs” > “Import LUTs.”
6. Choose LUT Recordsdata
Choose the LUT information you wish to import by checking the packing containers subsequent to them.
7. Import LUTs
Click on the “Import” button to repeat the LUTs to the Shinobi.
8. Create Customized Collections
To create a customized LUT assortment, navigate to the “Settings” > “LUTs” menu and choose “Handle Collections.”
| Choice | Description |
|---|---|
| Create Assortment | Identify and create a brand new LUT assortment. |
| Add LUT to Assortment | Choose an current LUT and add it to the present assortment. |
| Rename Assortment | Change the title of the present assortment. |
| Delete Assortment | Take away the present assortment and all its related LUTs. |
Upon getting created a customized assortment, you may choose it from the “LUTs” menu to use its LUTs to your footage.
Easy methods to Set up LUTs on Atomos Shinobi
LUTs (Look Up Tables) are a strong instrument for shade grading footage. They can be utilized to create a wide range of appears, from delicate changes to dramatic shade adjustments. When you’re utilizing an Atomos Shinobi monitor, you may set up LUTs to preview your footage with completely different shade grades.
To put in LUTs in your Atomos Shinobi, you’ll need:
- A USB flash drive formatted to FAT32
- LUT information in .dice format
Upon getting your LUT information, observe these steps:
- Copy your LUT information to the foundation listing of your USB flash drive.
- Insert the USB flash drive into the USB port in your Atomos Shinobi.
- Go to the "Settings" menu in your Atomos Shinobi.
- Choose "LUTs".
- Choose "Load LUT".
- Navigate to the USB flash drive and choose the LUT file you wish to set up.
- Choose "Load".
The LUT will now be put in in your Atomos Shinobi. You may preview your footage with the LUT utilized by choosing the LUT within the “LUTs” menu.
Folks Additionally Ask
How do I create my very own LUTs?
There are a number of software program applications that you should use to create your individual LUTs. Some fashionable choices embody DaVinci Resolve, LUTCalc, and Shade Finale. Upon getting created your LUTs, you may export them in .dice format and set up them in your Atomos Shinobi.
Can I take advantage of LUTs from different sources?
Sure, you should use LUTs from different sources, corresponding to web sites or boards. Nonetheless, you will need to be sure that the LUTs are suitable along with your Atomos Shinobi. The LUTs should be in .dice format they usually should be designed to be used with Log footage.
How do I delete LUTs from my Atomos Shinobi?
To delete LUTs out of your Atomos Shinobi, go to the “Settings” menu and choose “LUTs”. Then, choose the LUT you wish to delete and press the “Delete” button.
