Putting in a brand new bathe valve is usually a daunting activity, nevertheless it’s really fairly easy in case you have the precise instruments and know-how. On this article, we’ll stroll you thru the steps on methods to set up a Moen bathe valve, one of the vital in style manufacturers in the marketplace. By following our directions, you will have your new bathe valve up and operating very quickly.
Earlier than you start, collect all the crucial instruments and supplies. You may want a Phillips head screwdriver, a flat head screwdriver, a pair of pliers, a stage, and a pipe wrench. You may additionally want your new Moen bathe valve, in addition to any crucial trim. After getting every little thing you want, you possibly can start the set up course of. First, flip off the water provide to your bathe. Subsequent, take away the outdated bathe valve by unscrewing the screws that maintain it in place. As soon as the outdated valve is eliminated, you possibly can set up the brand new Moen valve. To do that, merely screw the brand new valve into place and tighten it with the pliers.
As soon as the brand new valve is put in, you possibly can connect the trim. To do that, merely snap the trim items into place. As soon as the trim is put in, you possibly can flip the water provide again on and check the brand new valve. If the valve is working correctly, you are all completed! Putting in a brand new Moen bathe valve is a comparatively easy activity that may be accomplished in just some hours. By following our directions, it can save you your self the time and expense of hiring a plumber.
Important Instruments and Supplies
Earlier than embarking on the set up course of, it’s essential to make sure you have the required instruments and supplies at hand. This complete listing will information you in gathering every little thing you want:
### Important Instruments
- Adjustable wrench: A software that means that you can regulate its grip for tightening and loosening bolts and nuts of varied sizes.
- Basin wrench: Particularly designed for tightening and loosening nuts in hard-to-reach areas, resembling beneath sinks and behind taps.
- Channel-lock pliers: Versatile pliers that may grip and rotate objects with a clean, adjustable jaw.
- Hex key: A software formed like an “L” or “T” with hexagonal ends, used for tightening and loosening fasteners with hexagonal heads.
- Degree: An instrument used to find out whether or not a floor is horizontal or vertical.
- Phillips head screwdriver: A screwdriver with a cross-shaped tip, generally used to tighten and loosen screws with cross-shaped heads.
- Plumber’s putty: A moldable, putty-like materials used to seal gaps and forestall leaks round pipes and fixtures.
- Tape measure: A versatile software used for measuring size and distance.
- Utility knife: A handheld reducing software with a pointy, retractable blade, used for reducing and scoring supplies.
### Important Supplies
| Part | Amount |
|---|---|
| Moen bathe valve | 1 |
| Bathe cartridge | 1 |
| Bathe arm | 1 |
| Bathe head | 1 |
| Trim equipment (deal with, escutcheon, and many others.) | 1 |
| PEX tubing (if relevant) | As wanted |
| CPVC pipes (if relevant) | As wanted |
Eradicating the Previous Valve
Put together for Removing
Earlier than you start, collect your instruments: an adjustable wrench, pliers, a small flathead screwdriver, and a flashlight (if crucial). Flip off the water provide on the important shut-off valve or the valves behind the entry panel. Open the showerhead and tap to launch any remaining water strain.
Disassemble the Valve Trim
Begin by eradicating the deal with by pulling it straight off. Subsequent, gently pry off the escutcheon plate utilizing a small flathead screwdriver or a plastic pry software. This can expose the valve cartridge or stem.
Extract the Cartridge or Stem
In case your valve has a cartridge, grasp it with pliers or a wrench and gently pull it straight out of the valve physique. In case your valve has a stem, take away the packing nut utilizing an adjustable wrench. You could want to make use of a flashlight to see contained in the valve physique and information the stem out. Watch out to not injury the valve physique.
Getting ready the Wall for Set up
1. Take away the Previous Valve and Trim
* Shut off the water provide to the bathe.
* Take away the deal with, trim plate, and some other seen parts of the outdated valve.
* Use a wrench to disconnect the availability strains from the valve.
2. Verify the Wall Cavity
* Verify the cavity behind the wall the place the brand new valve might be put in.
* Guarantee it’s clear and freed from any particles or obstructions.
* If there’s a backer board or cement board, be sure that it’s securely mounted to the wall.
3. Create a Tough Opening
* Decide the placement of the brand new valve and mark the define on the wall.
* Use a drywall noticed or a utility knife to chop a gap within the drywall.
* The opening needs to be barely bigger than the rough-in valve dimensions supplied by the producer.
Desk: Moen Valve Tough-In Dimensions
| Valve Measurement | Tough-In Opening Width | Tough-In Opening Peak |
|---|---|---|
| Commonplace (1/2 inch) | 5-13/16 inches | 6-5/16 inches |
| Giant (3/4 inch) | 6-13/16 inches | 7-5/16 inches |
* If the wall studs intervene with the tough opening, notch them out barely to create clearance for the valve.
Putting in the Tough-in Valve
The rough-in valve is step one in putting in a Moen bathe valve. It’s accountable for controlling the move of water to the showerhead and tap. Putting in the rough-in valve is a comparatively easy course of that may be accomplished in a couple of hours.
Listed here are the steps for putting in a Moen bathe rough-in valve:
- Flip off the water provide to the bathe.
- Take away the outdated bathe valve. If there isn’t a current valve, you will have to chop a gap within the wall for the brand new valve.
- Set up the rough-in valve within the wall. The valve needs to be put in in order that the deal with is dealing with up.
- Join the water provide strains to the rough-in valve. Make it possible for the cold and warm water strains are linked to the proper ports on the valve.
- Activate the water provide and test for leaks.
Suggestions for Putting in a Moen Bathe Tough-in Valve
Listed here are a couple of ideas for putting in a Moen bathe rough-in valve:
- Use a stage to make it possible for the rough-in valve is put in stage.
- Tighten the water provide strains securely, however don’t overtighten them.
- Take a look at the valve earlier than putting in the trim. This can make sure that the valve is working correctly.
| Software | Description |
|---|---|
| Adjustable wrench | Used to tighten the water provide strains. |
| Degree | Used to make it possible for the rough-in valve is put in stage. |
| Plumber’s putty | Used to seal the rough-in valve to the wall. |
| Screwdriver | Used to take away the outdated bathe valve and set up the brand new one. |
| Tape measure | Used to measure the gap between the water provide strains. |
Putting in a Moen bathe rough-in valve is a comparatively easy course of that may be accomplished in a couple of hours. By following these steps, you possibly can make sure that the valve is put in accurately and is working correctly.
Setting the Cartridge
After assembling the valve, now you can set up the cartridge. Here is a step-by-step information:
1. Take away the Deal with and Escutcheon
Begin by eradicating the deal with by pulling it immediately from the valve. Then, use a flat-head screwdriver to pry off the escutcheon plate that covers the cartridge.
2. Take away the Cease Ring
As soon as the escutcheon is eliminated, you will see a cease ring across the cartridge. Use a pair of pliers to grip the cease ring and switch it counterclockwise to loosen it.
3. Pull Out the Cartridge
As soon as the cease ring is unfastened, you possibly can pull the cartridge straight out of the valve physique.
4. Examine the Cartridge and O-Rings
Earlier than putting in the brand new cartridge, examine it rigorously for any injury. Additionally, test the O-rings on the cartridge for any put on or deterioration. If crucial, exchange the O-rings with new ones.
5. Insert the New Cartridge
Align the brand new cartridge with the valve physique and push it into place. Be certain it seats accurately and is totally inserted.
| Troubleshooting Suggestions |
|---|
| If the cartridge will not be totally inserted, it might not perform correctly. |
| If the cartridge is broken, it might not seal correctly and trigger leaks. |
| If the O-rings are worn or broken, they might not present a correct seal and trigger leaks. |
6. Set up the Cease Ring
Place the cease ring over the cartridge and switch it clockwise to tighten it. Be certain it is cosy however not overtightened.
7. Reinstall the Escutcheon and Deal with
Place the escutcheon plate over the valve and press it into place. Lastly, reattach the deal with and safe it with the set screw.
Putting in the Trim Plate
As soon as the valve physique is put in, it is time to set up the trim plate. The trim plate is the ornamental a part of the bathe valve that you simply see and work together with. It sometimes has handles for controlling the water move and temperature, and it might are available in a wide range of types and finishes to match your lavatory décor.
Step 7: Putting in the Deal with
The deal with is probably the most seen a part of the trim plate, so it is essential to put in it accurately. Listed here are the steps to comply with:
- Apply a small quantity of silicone sealant to the bottom of the deal with.
- Align the deal with with the valve physique and press it into place.
- Utilizing a screwdriver, tighten the set screw on the again of the deal with.
- Repeat steps 2-3 for the opposite deal with.
- Use a humid material to wipe away any extra silicone sealant.
- Activate the water and test for any leaks.
- If there are any leaks, tighten the set screws on the handles till the leaks cease.
Tip: If you’re putting in a Moen Posi-Temp valve, the handles may have a pink and blue indicator. The pink indicator is for warm water, and the blue indicator is for chilly water.
Testing the Valve for Leaks
As soon as the valve is put in, it is important to check it for leaks. Here is how:
- Activate the water provide to the bathe.
- Open the cold and warm taps on the showerhead.
- Verify for leaks in any respect the connections, together with the bathe arm, valve physique, and cartridge.
- For those who discover any leaks, tighten the connections as crucial or seek the advice of an expert plumber.
Checking for Leaks within the Valve Physique
For those who suspect a leak within the valve physique, there are a couple of further steps you possibly can take:
| Location of Leak | Doable Trigger | Resolution |
|---|---|---|
| Valve stem packing nut | Unfastened nut or worn packing | Tighten the packing nut or exchange the packing |
| Valve seat | Broken or worn seat | Change the valve seat |
| Valve physique itself | Cracked or broken physique | Change the valve physique |
Observe: All the time shut off the water provide earlier than making an attempt any repairs.
Ending Touches
With the rough-in full, it is time to add the ending touches to your Moen bathe valve.
1. **Snap on the Deal with:** Place the deal with over the valve physique and align the screw holes.
2. **Screw within the Deal with Screw:** Tighten the screw utilizing a screwdriver till the deal with is safe.
3. **Safe the Trim Plate:** Place the trim plate over the escutcheon and push it into place till it snaps.
4. **Wipe the Deal with with a Smooth Fabric:** Take away any filth or fingerprints from the deal with.
5. **Get pleasure from Your New Bathe Valve:** Activate the water provide and check your new Moen bathe valve.
Valve Trim Package Choice
Moen gives a variety of valve trim kits to enhance your bathe design. Here is a desk summarizing the out there choices:
| Trim Package | Type | End |
|---|---|---|
| M-Pact System | Customizable | Number of Finishes |
| Posi-Temp Valve Trim | Conventional | Chrome, Brushed Nickel, Oil-Rubbed Bronze |
| Moenflo XL Valve Trim | Trendy | Chrome, Brushed Gold, Matte Black |
How To Set up Moen Bathe Valve
Putting in a Moen bathe valve is a comparatively easy activity that may be accomplished in a couple of hours. By following these step-by-step directions, you possibly can guarantee a profitable set up.
Step 1: Collect your instruments and supplies. You will have the next:
- Phillips head screwdriver
- Adjustable wrench
- Plumber’s putty
- Teflon tape
- New Moen bathe valve
Step 2: Flip off the water provide to the bathe. That is often completed by closing the principle shut-off valve for the home. For those who have no idea the place the principle shut-off valve is situated, seek the advice of a certified plumber.
Step 3: Take away the outdated bathe valve. As soon as the water provide is turned off, you possibly can take away the outdated bathe valve. To do that, first take away the deal with by unscrewing the set screw. Then, use an adjustable wrench to loosen the packing nut. As soon as the packing nut is unfastened, you possibly can pull the valve out of the wall.
Step 4: Set up the brand new Moen bathe valve. Apply a bead of plumber’s putty across the base of the brand new valve. Then, insert the valve into the wall and tighten the packing nut. Lastly, connect the deal with to the valve and tighten the set screw.
Step 5: Activate the water provide and test for leaks. As soon as the brand new valve is put in, activate the water provide and test for leaks. If there are any leaks, tighten the packing nut till the leak stops.
Folks Additionally Ask About How To Set up Moen Bathe Valve
What’s one of the simplest ways to take away a Moen bathe valve?
The easiest way to take away a Moen bathe valve is to make use of an adjustable wrench to loosen the packing nut. As soon as the packing nut is unfastened, you possibly can pull the valve out of the wall.
How do I do know if my Moen bathe valve must be changed?
There are a couple of indicators that your Moen bathe valve could should be changed, together with:
- Leaks
- Issue turning the deal with
- Uncommon noises
Can I set up a Moen bathe valve myself?
Sure, you possibly can set up a Moen bathe valve your self. Nevertheless, you will need to comply with the directions rigorously and to make sure to flip off the water provide earlier than beginning the set up.
