Borderlands 3 is a first-person shooter sport developed by Gearbox Software program and revealed by 2K Video games. The sport was launched on September 13, 2019, for Microsoft Home windows, PlayStation 4, and Xbox One. Borderlands 3 is the fourth installment within the Borderlands collection and is a sequel to Borderlands 2. The sport options 4 new playable characters, every with their very own distinctive talents. Gamers may acquire and equip quite a lot of weapons and objects to customise their gameplay expertise.
Along with the primary sport, Borderlands 3 additionally options quite a lot of downloadable content material (DLC) packs. These DLC packs add new areas, characters, and objects to the sport. Gamers should buy DLC packs individually or as a part of the Season Go.
Putting in mods for Borderlands 3 is a comparatively easy course of. Nevertheless, there are some things that you must do earlier than you possibly can set up mods. First, that you must just remember to have the newest model of the sport put in. You possibly can verify for updates by launching the sport and clicking on the “Choices” menu. Then, click on on the “Updates” tab and verify for any out there updates.
Upon getting the newest model of the sport put in, you possibly can start putting in mods. There are two methods to put in mods for Borderlands 3: manually and utilizing a mod supervisor. Putting in mods manually is a extra difficult course of, nevertheless it offers you extra management over which mods you put in. To put in mods manually, that you must obtain the mod recordsdata from a trusted supply after which extract them to the sport’s listing. The sport’s listing is usually situated at “C:Program Recordsdata (x86)Borderlands 3”.
Upon getting extracted the mod recordsdata to the sport’s listing, that you must create a brand new folder contained in the “Borderlands 3” folder referred to as “Mods”. Then, transfer the extracted mod recordsdata into the “Mods” folder. Upon getting moved the mod recordsdata into the “Mods” folder, you possibly can launch the sport and begin utilizing the mods.
Utilizing a mod supervisor to put in mods is a a lot simpler course of than putting in mods manually. Mod managers let you browse, set up, and handle mods with only a few clicks. There are a variety of various mod managers out there, however the preferred one is named “Nexus Mod Supervisor”. Nexus Mod Supervisor is a free and open-source mod supervisor that helps a variety of video games, together with Borderlands 3.
To put in mods utilizing Nexus Mod Supervisor, you first must obtain and set up the mod supervisor. Upon getting put in Nexus Mod Supervisor, you possibly can launch it and click on on the “Video games” tab. Then, choose “Borderlands 3” from the listing of video games. Subsequent, click on on the “Mods” tab and browse for the mods that you simply need to set up.
Upon getting discovered the mods that you simply need to set up, click on on the “Set up” button. Nexus Mod Supervisor will routinely obtain and set up the mods for you. As soon as the mods have been put in, you possibly can launch the sport and begin utilizing them.
Putting in mods for Borderlands 3 is an effective way to customise your gameplay expertise. Nevertheless, you will need to be aware that mods can typically trigger issues with the sport. If you happen to expertise any issues with the sport after putting in a mod, it’s best to strive disabling the mod and see if that fixes the issue.
Putting in BL3 Mods with Drag and Drop
Putting in mods for Borderlands 3 with the drag-and-drop methodology is an easy and easy course of. Nevertheless, to make sure a clean set up and keep away from any potential points, it’s important to observe the steps rigorously. Here’s a detailed information on easy methods to set up BL3 mods utilizing the drag-and-drop methodology:
Conditions:
- Find the folder the place Borderlands 3 is put in in your laptop. The default set up directories are:
- Home windows: C:Program Recordsdata (x86)Epic GamesBorderlands 3
- Mac: /Purposes/Borderlands 3.app/Contents/MacOS/
- Create a brand new folder contained in the Borderlands 3 set up listing named “mods”. This folder will function the vacation spot to your mods.
- Obtain the specified BL3 mods from respected sources, corresponding to Nexus Mods or ModDB.
Set up Course of:
- Extract the downloaded mod recordsdata to your desktop or a brief folder.
- Be sure that the extracted mod recordsdata are in a .pak format. If they don’t seem to be, you’ll need to transform them utilizing a device just like the Archive Software for Borderlands 3.
- Drag and drop the .pak mod recordsdata out of your short-term folder into the “mods” folder you created within the Borderlands 3 set up listing.
- Launch Borderlands 3 and navigate to the “Most important Menu”.
- Click on on the “Choices” tab.
- Choose the “Gameplay” tab.
- Scroll all the way down to the “Group Content material” part.
- You must now see a listing of all put in mods. Allow the specified mods by clicking the corresponding checkbox.
- Exit the Choices menu and return to the “Most important Menu”.
- Your mods are actually put in and prepared to be used.
- Borderlands 3OakGameContentPaks~Cooked
- Borderlands 3OakGameContentUnrealPak~Cooked
Copy and paste the extracted mod recordsdata into these two folders. Overwrite any present recordsdata with the identical names.
3. Launching the Sport with Mods
Upon getting put in the mods, launch Borderlands 3 as normal. The modifications might be routinely utilized to the sport. You possibly can verify if the mods are working by searching for any modifications in gameplay, graphics, or different points of the sport as indicated by the mod descriptions.
Find the Mod File
Step one in putting in Borderlands 3 mods by way of drag-and-drop is to find the mod file. This file usually is available in a .zip or .rar format and is often discovered on modding web sites or boards devoted to the sport. As soon as you’ve got downloaded the mod file, that you must extract its contents right into a folder in your laptop.
Extract the Mod Recordsdata
After extracting the mod recordsdata, you may often discover a folder containing the next recordsdata:
File Goal ReadMe.txt Comprises directions and details about the mod Borderlands3.exe The modded executable file Backup the Authentic Sport Recordsdata
Earlier than you proceed with putting in the mod, it is extremely advisable to again up the unique Borderlands3.exe file, which is situated within the sport’s root listing. This backup ensures that if one thing goes improper in the course of the modding course of, you possibly can simply restore the unique recordsdata and revert to the unmodded sport.
Exchange the Sport File with the Modded File
The ultimate step is to exchange the unique Borderlands3.exe file with the modded executable file. To do that:
1. Navigate to the sport’s root listing.
2. Discover the unique Borderlands3.exe file.
3. Proper-click on the unique file and choose “Lower” or “Copy.”
4. Navigate to the folder the place you extracted the mod recordsdata.
5. Drag-and-drop the modded Borderlands3.exe file into the sport’s root listing.
6. When prompted to exchange the present file, choose “Sure” or “OK.”
Drag and Drop the Mod
1. Obtain the Mod
Discover and obtain the specified mod from respected modding web sites like Nexus Mods. Be sure that the mod is appropriate together with your sport model to keep away from any points.
2. Extract the Mod Recordsdata
Extract the downloaded mod recordsdata to an simply accessible location in your laptop. The extracted recordsdata ought to comprise the mod’s script and different essential elements.
3. Navigate to the Borderlands 3 Folder
Open the file explorer and navigate to the Borderlands 3 set up listing. Normally, it is situated in:
C:Program Recordsdata (x86)Borderlands 34. Create a Mods Folder
Contained in the Borderlands 3 folder, verify for a folder named "Mods." If it does not exist, create one to retailer your put in mods.
5. Drag and Drop the Extracted Mod Recordsdata
Open the extracted mod recordsdata and drag and drop them into the newly created "Mods" folder within the Borderlands 3 set up listing.
6. Activate the Mods in-Sport
To activate the put in mods, launch Borderlands 3 and navigate to the “Most important Menu.” From there, choose “Choices” after which “Social.” Beneath the “Social” tab, find the “Mod Checklist” part. Right here, you will see that the put in mods. Allow the specified mods by checking the checkbox subsequent to every one.
NOTE: You will need to make sure that the put in mods are appropriate with one another. If any conflicts come up, the sport might crash or encounter different points. It’s endorsed to solely use mods from respected sources and to periodically verify for updates to each the mods and the sport to make sure compatibility.
Troubleshooting Widespread Points
Sanity Checks
If mods usually are not working while you attempt to drag and drop them into the sport, there are some things you possibly can verify to troubleshoot the problem:
- Ensure that the mods you are attempting to put in are appropriate together with your model of the sport.
- Just be sure you are dragging and dropping the mod recordsdata into the proper folder (DocumentsMy GamesBorderlands 3Mods) as a result of the sport will solely load mods from this folder.
- Ensure that the mod recordsdata usually are not corrupted.
Resetting the Sport’s Config Recordsdata
When you’ve got tried the above steps and the mods are nonetheless not working, you possibly can strive resetting the sport’s config recordsdata:
- Shut the sport.
- Delete the next recordsdata out of your DocumentsMy GamesBorderlands 3 folder: WillowGame.ini, WillowInput.ini, WillowEngine.ini, and WillowInput.ini.
- Restart the sport.
Reinstalling the Sport
When you’ve got tried the entire above steps and the mods are nonetheless not working, you possibly can strive reinstalling the sport.
Updating Your Drivers
Outdated graphics drivers can typically trigger issues with mods, so just remember to have the newest drivers put in to your graphics card.
Restarting Your Pc
Generally, merely restarting your laptop can repair issues with mods.
Verifying the Sport Recordsdata
In case you are utilizing Steam, you possibly can confirm the sport recordsdata to verify for any corrupted or lacking recordsdata:
- In Steam, right-click on Borderlands 3 in your library and choose Properties.
- Click on on the Native Recordsdata tab.
- Click on on the Confirm integrity of sport recordsdata button.
Reinstalling the Mod Supervisor
In case you are utilizing a mod supervisor, strive reinstalling it to see if that fixes the issue.
Contacting the Mod Creator
When you’ve got tried the entire above steps and the mods are nonetheless not working, you possibly can strive contacting the mod creator for assist.
Superior Modding Concerns
10. Customizing the Sport’s Interface
For these looking for extra intricate modding experiences, customizing the sport’s interface gives infinite potentialities. This entails enhancing XML recordsdata to change parts like menus, tooltips, and HUD visuals. By understanding the sport’s construction and codebase, you possibly can tailor the interface to your liking, enhancing each its performance and aesthetics.
Keep in mind that intensive modding can probably introduce conflicts or stability points. All the time totally take a look at your modifications and again up your unique sport recordsdata earlier than making important modifications. Seek the advice of with skilled modders for steering and troubleshooting if wanted.
How To Set up Borderlands 3 Mods Drag And Drop
Borderlands 3 mods will be put in utilizing the drag and drop methodology. It is a easy and simple technique to set up mods, and it doesn’t require any particular software program or information. To put in a mod utilizing the drag and drop methodology, merely observe these steps:
- Obtain the mod file from a trusted supply.
- Open the Borderlands 3 sport folder.
- Find the “mods” folder.
- Drag and drop the mod file into the “mods” folder.
- Begin Borderlands 3 and benefit from the mod!
Listed here are some extra suggestions for putting in Borderlands 3 mods utilizing the drag and drop methodology:
- Ensure that the mod file is appropriate together with your model of Borderlands 3.
- You’ll want to again up your sport recordsdata earlier than putting in any mods.
- Solely set up mods from trusted sources.
Folks Additionally Ask About How To Set up Borderlands 3 Mods Drag And Drop
How do I set up Borderlands 3 mods manually?
To put in Borderlands 3 mods manually, you’ll need to make use of a textual content editor corresponding to Notepad or Notepad++. Upon getting a textual content editor open, observe these steps:
- Open the Borderlands 3 sport folder.
- Find the “mods” folder.
- Create a brand new folder contained in the “mods” folder.
- Give the brand new folder a reputation that’s descriptive of the mod.
- Open the mod file in a textual content editor.
- Copy the contents of the mod file into the brand new folder.
- Save the modifications to the brand new folder.
- Begin Borderlands 3 and benefit from the mod!
How do I uninstall Borderlands 3 mods?
To uninstall Borderlands 3 mods, merely delete the mod recordsdata from the “mods” folder. You may as well delete the complete “mods” folder if you wish to take away the entire mods that you’ve got put in.
The place can I discover Borderlands 3 mods?
There are a lot of web sites the place you could find Borderlands 3 mods. Among the hottest web sites embrace Nexus Mods, ModDB, and GameBanana.
Conditions: Nexus Mods Account
To start modding Borderlands 3 by way of the drag-and-drop methodology, you’ll need to create an account on the Nexus Mods web site. This platform hosts an enormous assortment of modifications developed by the neighborhood, offering entry to a variety of enhancements and customizations for the sport.
Set up Course of: Drag-and-Drop Methodology
1. Downloading the Mods
Head over to the Nexus Mods web site and navigate to the Borderlands 3 web page. Flick thru the out there mods and find those you want to set up. Obtain the mod recordsdata in .zip format, guaranteeing they’re appropriate together with your sport model.
2. Extracting and Putting the Mods
Upon getting downloaded the mod recordsdata, extract the contents of every .zip archive into a brand new folder. Contained in the extracted folder, you will see that the mod recordsdata in numerous codecs corresponding to .pak, .uasset, and .upk. These recordsdata comprise the modifications that might be utilized to your sport.
Find the Borderlands 3 sport listing in your laptop. By default, it’s often discovered within the following areas:
| Working System | Default Sport Listing |
|---|---|
| Home windows | C:Program Recordsdata (x86)SteamsteamappscommonBorderlands 3 |
| Mac | /Purposes/Borderlands 3.app/Contents/MacOS/Borderlands3 |
| Linux | /house/ Throughout the sport listing, navigate to the next subfolders: |
