Within the realm of vaping, the NOVVO 2X Pod system stands as a testomony to innovation and comfort. Its revolutionary design and user-friendly interface have made it a favourite amongst vapers of all expertise ranges. Nonetheless, one key facet of utilizing the NOVVO 2X Pod is mastering the artwork of filling it accurately. Whether or not you are a seasoned vaper or simply beginning your vaping journey, this complete information will give you the important steps and suggestions to make sure a seamless and satisfying vaping expertise along with your NOVVO 2X Pod.
Earlier than embarking on the filling course of, it’s essential to collect the mandatory supplies. You will want a NOVVO 2X Pod, your most well-liked e-liquid, and a clear material or paper towel. With these things at your disposal, you may proceed with filling your NOVVO 2X Pod. To start, gently take away the mouthpiece from the pod by pulling it upwards. As soon as the mouthpiece is indifferent, you will notice a small gap on the backside of the pod. That is the place you’ll insert the e-liquid. Utilizing the dropper offered along with your e-liquid bottle, rigorously fill the pod till it reaches the indicated fill line. Keep away from overfilling the pod, as this will result in leaking and different points.
After filling the pod, rigorously reattach the mouthpiece by urgent it firmly into place. Be sure that it’s securely linked to stop any e-liquid leakage. As soon as the mouthpiece is connected, wipe away any extra e-liquid that will have spilled onto the pod or your palms. Lastly, insert the crammed pod into your NOVVO 2X machine and revel in your vaping expertise. Bear in mind to prime the coil by taking a couple of brief puffs with out inhaling earlier than vaping commonly. This step helps to saturate the coil adequately and prevents dry hits.
Inserting the Pod into the System
Putting in the pod into your Novvo 2x machine is a fast and straightforward course of. Observe these detailed steps to make sure a correct match:
-
Find the Pod Bay: Flip your Novvo 2x the other way up and open the magnetically secured pod bay located on the underside of the machine.
-
Orient the Pod Accurately: Take a contemporary pod and guarantee its notch is aligned with the corresponding notch contained in the pod bay. The pod ought to match snugly into place.
- Desk of Pod Orientations:
Pod Sort Notch Alignment Single-use Pod Notch dealing with the entrance of the machine Refillable Pod Notch dealing with the again of the machine -
Safe the Pod Bay: As soon as the pod is inserted, shut the pod bay magnetically. Confirm that the pod is firmly secured by gently urgent on it. A delicate "click on" ought to point out a correct match.
-
Prime the System: Take a couple of light puffs on the mouthpiece to activate the pod. It will permit the e-liquid to saturate the coil, making certain optimum vapor manufacturing and taste supply.
Filling the Chamber
The Novvo 2x Pod is a revolutionary new pod system that makes filling your favourite e-liquid a breeze. With its modern design, the Novvo 2x Pod encompasses a top-fill system that eliminates the necessity for messy and time-consuming bottom-filling.
To fill the Novvo 2x Pod, merely comply with these straightforward steps:
1. Take away the Pod
To take away the pod, gently pull it straight up from the machine.
2. Find the Fill Port
The fill port is situated on the highest of the pod. It’s coated by a small rubber stopper.
3. Fill the Chamber
Use the included e-liquid bottle to fill the chamber. The chamber holds as much as 2ml of e-liquid.
**Suggestions for Filling the Chamber:**
- Use a needle-tip bottle or syringe to fill the chamber. It will assist to stop spilling.
- Fill the chamber slowly to keep away from overflowing.
- Go away a small air bubble on the prime of the chamber.
| Step No. | Description |
|---|---|
| 1 | Find the Fill Port |
| 2 | Take away the rubber stopper |
| 3 | Fill the chamber to the highest |
| 4 | Exchange the rubber stopper |
Measuring the Appropriate Dosage
To fill your Novvo 2x pod with the proper dosage of treatment, comply with these steps:
1. Collect Your Supplies:
You will want your Novvo 2x pod, treatment vial, and diluent (if required).
2. Put together the Treatment:
In case your treatment requires dilution, combine it in keeping with the producer’s directions. Draw the diluted treatment right into a 1mL syringe.
3. Take away the Pod Cap:
Take away the cap from the Novvo 2x pod by gently pulling it straight up.
4. Fill the Pod:
Maintain the pod upright and insert the syringe needle into the fill port on prime. Slowly depress the syringe plunger to fill the pod. Be sure that there aren’t any air bubbles current throughout the pod. If an air bubble seems, gently faucet the pod to dislodge the bubble and proceed filling. As soon as the specified dosage is reached, slowly withdraw the syringe needle.
5. Exchange the Pod Cap:
Place the cap securely again on prime of the pod by urgent it down till it clicks into place.
Avoiding Overfilling
Overfilling your NOVVO 2X pod can result in leaking and different points. To keep away from overfilling, comply with the following tips:
1. Fill the Pod Slowly
Take your time when filling the pod. It will assist you to keep away from spilling e-liquid over the edges.
2. Use the Fill Line
The NOVVO 2X pod has a fill line marked on the facet. Use this line to information you when filling the pod. Cease filling as soon as the e-liquid reaches the fill line.
3. Test for Air Bubbles
As soon as you’ve got crammed the pod, faucet it gently to launch any air bubbles. Air bubbles could cause the pod to leak.
4. Wipe Away Extra E-Liquid
Should you spill any e-liquid on the pod or machine, wipe it away with a clear material. It will assist forestall leaking.
5. Filling Chart
Under is a chart that gives extra particulars on the filling course of for the NOVVO 2X pod:
Closing the Lid
As soon as the pod is crammed, shut the lid by lining up the arrows on the pod and the machine and urgent the lid down till it clicks into place. Be certain that the lid is securely mounted to stop any leaking or injury to the machine.
Listed below are some extra suggestions for closing the lid:
1. Test the alignment: Earlier than closing the lid, be sure that the fill port is dealing with the proper manner. If it isn’t aligned correctly, it may well trigger leaks or injury to the machine.
2. Press firmly: When closing the lid, apply agency and even strain to make sure a safe match. A free lid could cause the pod to leak or malfunction.
3. Keep away from overtightening: Whereas it is vital to shut the lid securely, keep away from overtightening. Doing so can injury the pod or the machine.
4. Test for leaks: After closing the lid, verify the pod and machine for any indicators of leaking. If there are any leaks, clear the realm totally and check out closing the lid once more.
5. Seal the pod correctly: If the lid will not be closed correctly, it may well permit air to enter the pod and oxidize the e-liquid. This may have an effect on the flavour and high quality of the vape.
6. Clear the lid: If the lid turns into soiled or sticky, clear it with a cotton swab dipped in rubbing alcohol. It will assist forestall any contamination.
7. Troubleshooting: Should you’re having hassle closing the lid, verify the next:
| Problem | Resolution |
|---|---|
| Lid not aligning | Test the alignment of the pod and machine. |
| Lid not closing securely | Press the lid extra firmly. |
| Lid overtightened | Loosen the lid and check out closing it once more. |
| Pod leaking | Test for alignment, clear the realm, and check out closing the lid once more. |
| Pod not vaping correctly | Make sure the lid is closed correctly and verify for leaks. |
Learn how to Fill Novvo 2x Pod
Filling the Novvo 2x pod is an easy course of that may be accomplished in a couple of straightforward steps:
- Take away the pod from the machine.
- Find the fill port on the facet of the pod.
- Insert the tip of your e-liquid bottle into the fill port.
- Squeeze a small quantity of e-liquid into the pod.
- Repeat steps 3 and 4 till the pod is full.
- Reinsert the pod into the machine.
Suggestions:
- Don’t overfill the pod, as this will trigger e-liquid to leak.
- Watch out to not get any e-liquid within the air gap.
- If you’re new to vaping, it’s endorsed to begin with a low nicotine energy e-liquid.
Individuals Additionally Ask
How typically ought to I refill my Novvo 2x pod?
The frequency with which it is advisable refill your Novvo 2x pod will rely upon how typically you vape. Nonetheless, as a basic rule of thumb, it is best to refill your pod when the e-liquid stage is low.
What sort of e-liquid can I take advantage of with my Novvo 2x pod?
You should utilize any sort of e-liquid along with your Novvo 2x pod. Nonetheless, you will need to notice that some e-liquids could also be too thick for the pod to vaporize correctly. If you’re not sure whether or not or not an e-liquid is appropriate along with your Novvo 2x pod, it’s at all times finest to seek the advice of with the producer.
How do I clear my Novvo 2x pod?
To wash your Novvo 2x pod, merely take away it from the machine and wipe it down with a clear, dry material. You can even use a cotton swab to scrub the within of the pod.
