3 Steps to Effortlessly Close Your Tommy Bahama Beach Chair

3 Steps to Effortlessly Close Your Tommy Bahama Beach Chair

It’s important to have the ability to open and shut Tommy Bahama’s seashore chair correctly. After a protracted and enjoyable day on the seashore, the very last thing you wish to cope with is a chair that will not shut. By following a couple of easy steps, you may shortly and simply shut your Tommy Bahama seashore chair so as to get on together with your day.

First, it’s good to ensure that the chair is totally dry. If the chair is moist, it is going to be tough to shut and you could find yourself damaging it. To dry the chair, merely open it up and let it sit within the solar for a couple of hours. As soon as the chair is dry, you may start to shut it.

To shut the chair, first fold the legs up in direction of the seat. Subsequent, fold the seat in half. The seat ought to fold up in order that the highest of the seat is going through down. Lastly, fold the backrest of the chair down in order that it’s flat towards the seat. The chair is now closed and could be saved or transported.

Dismantle the Armrests

Eradicating the armrests out of your Tommy Bahama seashore chair is crucial for compact storage or transportation.
To start out, establish the connection factors situated on the base of every armrest the place they connect to the principle body.
Relying in your chair mannequin, these factors might characteristic snap-fit buttons, screws, or bolts.

When you have snap-fit buttons, merely press them collectively whereas concurrently pulling the armrests away from the body.
Then again, in case your chair makes use of screws or bolts, use a screwdriver or wrench to loosen and take away them.
As soon as the fasteners are indifferent, the armrests will simply slide off the principle body.

Here is a step-by-step information that can assist you disassemble the armrests:

Step 1 Establish the connection factors on the base of every armrest.
Step 2 Decide the kind of fasteners used (snap-fit buttons, screws, or bolts).
Step 3 If the fasteners are snap-fit buttons, press them collectively whereas pulling the armrests away from the body.
Step 4 If the fasteners are screws or bolts, use a screwdriver or wrench to loosen and take away them.
Step 5 As soon as the fasteners are indifferent, the armrests will slide off the principle body.

Keep in mind to comply with these steps fastidiously to make sure the secure and correct disassembly of the armrests in your Tommy Bahama seashore chair.

Fold the Chair in Half

To fold the chair in half, first, transfer the armrests down and snap them into the locked place. Discover the 2 launch levers on the again of the chair and squeeze them collectively. Whereas squeezing the levers, fold the again of the chair down over the seat. The chair ought to now be folded in half. To safe, wrap the straps across the folded chair and snap them collectively.

The next steps present extra detailed directions on fold the Tommy Bahama seashore chair in half:

1. Decrease and Lock the Armrests

Find the armrests on both aspect of the chair. Carry the armrests up till they’re parallel to the bottom. Then, push them down till they snap into the locked place.

2. Squeeze the Launch Levers and Fold the Again

Discover the 2 launch levers on the again of the chair, one on either side. Squeeze the levers collectively whereas concurrently folding the again of the chair down over the seat. The chair ought to now be folded in half.

3. Safe with Straps

Wrap the straps across the folded chair and snap them collectively to safe the chair within the folded place.

Take away the Rear Crossbar

The rear crossbar is what retains the chair again upright. To take away it, first, find the 2 plastic knobs on the again of the chair, one on either side. Grip the knobs and squeeze them collectively whereas pulling the crossbar straight up. The crossbar ought to come off simply.

If the crossbar is caught, you should use a flat-head screwdriver to pry it unfastened. Insert the screwdriver into the slot between the crossbar and the chair again, and gently pry the crossbar up. As soon as the crossbar is unfastened, you may pull it off the chair.

As soon as the rear crossbar is eliminated, it is possible for you to to fold the chair flat for storage or transport.

Troubleshooting

Downside Answer
The rear crossbar is caught. Use a flat-head screwdriver to pry it unfastened.
The rear crossbar will not come off. Be sure to are squeezing the plastic knobs collectively whereas pulling the crossbar straight up.
The rear crossbar is damaged. Contact Tommy Bahama customer support for a alternative half.

Collapse the Seat

To break down the seat, start by eradicating the seat cushion by unvelcroing the straps across the backside. Unclip the hinges attaching the seat body to the again. Carry the seat up and over the again of the chair. Lastly, launch the hinged legs from the underside of the seat, and the seat will fall into place.

Unfold the Again

As soon as the seat has been collapsed, push the entrance legs of the chair collectively. Squeeze collectively the steel brackets on the again of the chair slightly below the seat. Pull the highest of the again of the seat up and towards the seat till it clicks into place.

Folding the Chair

Lay the chair flat on its again. Step on the center of the seat to safe it in place. Fold the legs of the chair up and into the chair. Subsequent, fold the seat down over the legs and again of the chair. Lastly, safe the chair shut with the strap.

Carrying the Chair

To hold the chair, merely choose it up by the strap. The chair could be carried over your shoulder or by your aspect.

Storing the Chair

The chair could be saved in a storage, closet, or different cupboard space. The chair needs to be saved dry and out of direct daylight.

Disconnect the Facet Bars

To start the folding course of, it’s important to disconnect the aspect bars that maintain the chair in an open place. Find the push-button launch mechanisms on each side of the chair, close to the seat. Press and maintain these buttons concurrently.

As you maintain the buttons, gently pull the aspect bars inward in direction of the middle of the chair. The bars ought to slide easily into the designated slots, designed to accommodate them within the closed place.

As soon as the aspect bars are absolutely engaged within the slots, launch the push-button mechanisms. The aspect bars ought to stay securely locked in place, making certain the chair’s stability when closed.

Detach the Material

To detach the material from the body, find the Velcro or snaps that join the 2. Rigorously peel aside the Velcro or unclip the snaps. As soon as all of the fasteners are indifferent, the material could be faraway from the body.

Ideas for Detaching the Material

  • Be light when detaching the material to keep away from tearing it.
  • If the fasteners are caught, use a butter knife or plastic spudger to softly pry them aside.
  • If the material is especially tough to take away, strive soaking it in heat water for a couple of minutes to loosen the Velcro or snaps.

Extra Notes on Detaching the Material

Material Sort Fastener Sort Detachment Ideas
Canvas Velcro Peel aside gently. Use a butter knife or plastic spudger if vital.
Nylon Snaps Unclip the snaps. If the snaps are caught, use a pair of needle-nose pliers.
Polyester Velcro and Snaps Detach the Velcro and unclip the snaps. Soak the material in heat water if vital.

Take away the Hinge Bolts

After getting eliminated the locking pin, it is time to sort out the hinge bolts. Seize the bolts and thoroughly unscrew them utilizing a screwdriver or wrench. As you loosen the bolts, the 2 body sections will start to separate. Be cautious to not over-loosen the bolts, as they will simply fall out and grow to be misplaced. To forestall this, maintain the bolt with one hand whereas turning the screwdriver with the opposite.

There are eight hinge bolts that maintain the 2 body sections collectively. The situation of the bolts might differ barely relying on the mannequin of your Tommy Bahama seashore chair, however they’re usually situated on the following factors:

Location Variety of Bolts
Prime of the Backrest 2
Backside of the Backrest 2
Prime of the Seat 2
Backside of the Seat 2

As soon as all eight hinge bolts are eliminated, the 2 body sections can be fully indifferent. Now you can proceed to fold the chair for storage or transport.

Clear and Lubricate the Chair

After each use, it is important to scrub and lubricate your Tommy Bahama seashore chair to take care of its optimum efficiency and lifespan. Here is a step-by-step information:

Instruments You will Want:

Merchandise Objective
Gentle cleaning soap Cleansing the material
Sponge Making use of cleaning soap and water
Mushy fabric Wiping dry
WD-40 or silicone spray Lubricating transferring elements

Directions:

  1. Rinse with water: Use a hose to take away any sand or filth from the material and body.
  2. Create a cleansing answer: Combine a couple of drops of gentle cleaning soap in a bucket of heat water.
  3. Apply cleansing answer: Use a sponge to use the cleansing answer to the material, gently scrubbing any stains or filth.
  4. Rinse completely: Use a hose to rinse the material completely, eradicating all cleaning soap residue.
  5. Wipe dry: Use a comfortable fabric to softly pat the material dry.
  6. Lubricate transferring elements: Spray WD-40 or silicone spray onto all transferring elements of the chair, akin to hinges, fasteners, and wheels.
  7. Wipe away extra lubricant: Use a comfortable fabric to wipe away any extra lubricant which will entice filth or sand.
  8. Let dry fully: Permit the chair to dry fully earlier than storing it or utilizing it once more.

Reassemble the Chair

9. Prolong the Seat and Backrest:

  1. Seat:

    • Grasp the entrance fringe of the seat body.
    • Pull the seat ahead till it reaches its furthest level.
    • Confirm that the seat is correctly prolonged by checking that the material is taut and safe.
  2. Backrest:

    • Find the 2 knobs on the underside corners of the backrest body.
    • Rotate the knobs outward to launch the backrest.
    • Gently pull the backrest up and again till it reaches the specified angle.
    • Tighten the knobs to safe the backrest in place.

Modify the Rigidity

As soon as you’ve got arrange your chair, you could want to regulate the strain of the material to make sure most consolation. Here is do it:

  1. Find the strain knobs: They’re often situated on the edges of the chair’s again body.
  2. Loosen the knobs: Flip them counterclockwise to loosen the material stress.
  3. Tighten the knobs: Flip them clockwise to extend the strain.
  4. Verify the strain: Sit within the chair and modify the strain till you discover the specified firmness or help.
  5. Retighten the knobs: After getting the specified stress, retighten the knobs to safe the material.

Ideas for Adjusting Rigidity:

Adjustment End result
Elevated stress Elevated help and firmness
Decreased stress Softer and extra relaxed really feel
Uneven stress Could cause discomfort or improper help

Keep in mind to regulate the strain usually, particularly after extended use, to take care of the chair’s consolation and help.

How To Shut Tommy Bahama Seashore Chair

To shut your Tommy Bahama seashore chair, comply with these steps:

  1. Fold the legs of the chair collectively.
  2. Carry the seat of the chair and fold it down over the legs.
  3. Safe the seat of the chair with the velcro strap.

Your Tommy Bahama seashore chair is now closed and able to be saved or transported.

Folks Additionally Ask About How To Shut Tommy Bahama Seashore Chair

How do you fold a Tommy Bahama backpack seashore chair?

To fold a Tommy Bahama backpack seashore chair, comply with these steps:

  1. Unzip the backpack and take away the chair.
  2. Fold the legs of the chair collectively.
  3. Fold the seat of the chair down over the legs.
  4. Safe the seat of the chair with the velcro strap.
  5. Place the chair again within the backpack and zip it up.

How do you shut a Tommy Bahama zero gravity chair?

To shut a Tommy Bahama zero gravity chair, comply with these steps:

  1. Carry the seat of the chair and fold it down over the legs.
  2. Safe the seat of the chair with the velcro strap.