Binding is a vital last step in quilting that may actually make your piece shine. It not solely secures the layers of quilt collectively, however it additionally supplies a possibility so as to add an additional contact of fashion and persona to your challenge. There are a lot of other ways to bind a quilt, every with its personal benefits and downsides. On this article, we’ll stroll you thru the most well-liked strategies, so you may select the one which’s proper to your wants.
For an skilled quilter, binding a quilt is a comparatively fast and simple course of that may be accomplished in a day. Nonetheless, in case you’re new to quilting, it is essential to take your time and study the strategies correctly. With just a little endurance and observe, you can bind your quilts like a professional!
Now that you’ve a fundamental understanding of quilt binding, let’s get began! On this part, we’ll present step-by-step directions for the 2 hottest binding strategies: machine binding and hand binding. We’ll additionally present ideas and tips for making your binding look its greatest. So seize your quilt and let’s get began!
Making ready the Quilt Prime
Step one in binding a quilt is to organize the quilt prime. This entails squaring up the highest, trimming any extra cloth, and including a backing and batting. Here is an in depth information to every step:
Squaring Up the Quilt Prime
Step one is to sq. up the quilt prime. This implies ensuring that each one 4 sides are equal in size and that the corners are proper angles. To do that, use a big ruler or yardstick to measure the size of every aspect. If any aspect is longer than the others, trim off the surplus cloth. Then, measure the diagonal distance from every nook to the other nook. If the 2 diagonals usually are not equal, the quilt prime is just not sq.. To repair this, fold the quilt prime in half diagonally and ensure that the 2 edges line up. Then, pin the sides collectively and stitch them right down to create a straight line. It will sq. up the quilt prime.
Deciding on and Slicing Binding Cloth
Selecting the Cloth
The binding cloth performs an important position within the total look and sturdiness of your quilt. Take into account the next components when making your choice:
- Coloration and Sample: The binding ought to complement the quilt’s design and colours. It may be a stable shade, a print that matches the quilt, or a contrasting cloth to create a daring assertion.
- Weight and Texture: Select a binding cloth that’s barely heavier than the quilt prime however nonetheless gentle and pliable. Cotton, linen, or flannel are standard selections.
- Sturdiness: The binding will probably be uncovered to put on and tear, so go for a material that’s sturdy and won’t fray simply.
The width of the binding will decide how a lot cloth you could buy. The commonest width for binding is 2.5 inches. For the standard sized quilt, you have to roughly 10-12 yards of cloth.
Slicing the Binding Strips
Upon getting chosen your cloth, lower the binding strips utilizing a rotary cutter and ruler. The size of every strip will depend upon the scale of your quilt and the width of the binding. To calculate the required size, measure the perimeter of your quilt (plus just a few inches for overlap) after which divide that quantity by the width of the binding.
For instance, in case your quilt measures 60 inches by 72 inches and you’re utilizing 2.5-inch broad binding, you would want to chop:
| Perimeter of quilt: | 60 + 72 + 60 + 72 = 264 inches |
| Variety of strips: | 264 รท 2.5 = 105.6 |
| Rounded as much as the closest complete quantity: | 106 strips |
Reduce every strip to the calculated size, making certain that they’re all straight and even.
Becoming a member of Binding Strips
Upon getting lower the binding strips within the desired width and size, you could be part of them to create a steady size. There are two primary strategies for becoming a member of binding strips: straight-line becoming a member of and miter becoming a member of. Each strategies are comparatively straightforward, however miter becoming a member of creates a cleaner, extra professional-looking end.
**Straight-line Becoming a member of**
To affix binding strips utilizing the straight-line methodology, merely place the ends of the strips collectively and stitch them utilizing a straight sew. You may both sew by hand or use a stitching machine. If stitching by hand, use a small, sharp needle and thread. If utilizing a stitching machine, use an everyday needle and thread and set the sew size to medium.
| Methodology | Steps |
|---|---|
| Straight-line Becoming a member of |
|
| Miter Becoming a member of |
|
**Miter Becoming a member of**
To affix binding strips utilizing the miter methodology, comply with these steps:
- Fold again one strip about 2 inches.
- Place the opposite strip on prime of the folded strip, aligning the uncooked edges.
- Sew the strips collectively alongside the uncooked edges, beginning about 1/2 inch from the folded edge.
- Unfold the folded strip and trim the surplus cloth near the seam.
- Repeat steps 1-4 to hitch the remaining binding strips.
Measuring and Pinning the Binding
1. Calculate the Binding Size
Measure the perimeter of your quilt prime with a measuring tape, together with the selvages. Multiply this quantity by 2 to account for each the back and front of the binding.
2. Decide the Width of the Binding
You may select the width of your binding primarily based on private desire or the scale of your quilt. A regular binding width is 2.5 inches (6.35 cm).
3. Reduce the Binding Strips
Reduce strips of cloth which are the specified width of your binding and the size calculated in Step 1.
4. Be a part of the Binding Strips
| Binding Width | Becoming a member of Methodology |
|---|---|
| 2.5 inches (6.35 cm) | Finish-to-end with a diagonal seam |
| 3 inches (7.62 cm) | Finish-to-end with a sq. seam |
| 4 inches (10.16 cm) | Steady strip with a mitered nook seam |
To affix end-to-end with a diagonal seam:
- Overlap the ends of two binding strips by 1 inch (2.54 cm).
- Reduce the overlapped portion diagonally from one nook to the other nook.
- Sew the binding strips collectively alongside the diagonal seam.
To affix end-to-end with a sq. seam:
- Overlap the ends of two binding strips by 1 inch (2.54 cm).
- Trim the surplus cloth from the outer fringe of the strip.
- Sew the binding strips collectively parallel to the uncooked edges.
To affix a steady strip with a mitered nook seam:
- Create a 45-degree angle lower on the tip of the binding strip.
- Overlap the angled fringe of the binding strip over the second strip by 1/2 inch (1.27 cm).
- Fold the second strip over the angled edge and stitch the binding strips collectively at a 45-degree angle.
Machine Stitching the Binding
1. Trim the Binding
Trim the binding strips to a uniform width of two.5 inches. Make sure to trim them straight and precisely, as any unevenness will present within the completed quilt.
2. Be a part of the Binding Strips
Be a part of the binding strips collectively end-to-end with a diagonal seam. Trim the surplus cloth from the corners to scale back bulk.
3. Press the Binding
Press the binding strips in half lengthwise, improper sides collectively. It will create a crisp and neat edge that will probably be straightforward to stitch.
4. Pin the Binding
Pin the binding across the edges of the quilt, uncooked edges aligned. Use a pointy pin to create a small sew each few inches.
5. Machine Sew the Binding
Swap your stitching machine to a zigzag sew, and alter the sew width to the thickness of your binding (sometimes 2.5mm). Begin stitching at one nook of the quilt and proceed alongside all the perimeter, taking small stitches (about 2-3 stitches per inch) to make sure a safe maintain.
Use the next desk as a reference for the very best zigzag sew settings for various cloth weights:
| Cloth Weight | Sew Width |
|---|---|
| Light-weight | 2.0-2.5mm |
| Medium-weight | 2.5-3.0mm |
| Heavyweight | 3.0-3.5mm |
As you sew, hold the binding taut and easy to stop puckering or unevenness. Once you attain the tip of the binding, overlap the uncooked edges barely and trim any extra cloth.
Hand Stitching the Binding
Hand stitching the binding is a standard methodology that gives a safe and long-lasting end. Here is a step-by-step information:
Supplies:
| Merchandise | Description |
|---|---|
| Binding | Strips of cloth used to wrap across the edges of the quilt |
| Needle | Sharp needle, dimension 5-7 |
| Thread | Matching or contrasting thread |
| Thimble | Non-obligatory, for defense |
Steps:
1. Trim the surplus binding: Fold the binding over the sting of the quilt and trim any extra cloth.
2. Safe the binding with pins: Pin the binding across the quilt, making certain it lies flat and evenly distributed.
3. Begin stitching: Start stitching at one nook, utilizing a small backstitch to safe the thread.
4. Use a blind sew: Take small, even stitches that catch solely the again of the binding and the sting of the quilt prime.
5. Proceed stitching: Work across the quilt, rigorously stitching the binding in place.
6. Mitered corners: For an expert end, create mitered corners by overlapping the binding on the corners and stitching diagonally. To do that:
– Fold the binding from either side over the nook, creating an overlap.
– Trim the surplus cloth at a 45-degree angle.
– Unfold the binding and sew alongside the diagonal edge.
– Repeat for the opposite aspect of the nook.
7. End the stitching: Once you attain the beginning nook, safe the thread with a knot or a backstitch. Trim any extra thread.
Trimming and Ending the Binding
1. Trimming the Corners
As soon as the binding is sewn across the quilt, trim any extra cloth from the corners. Rigorously lower away the material that extends past the sting of the quilt, leaving about 1/4 inch of overlap.
2. Mitering the Corners
To create a mitered nook, fold the binding at a 45-degree angle on the nook. The uncooked edges ought to lengthen past the sting of the quilt by about 1/4 inch. Trim the surplus cloth alongside the folded edge.
3. Becoming a member of the Corners
Place the mitered corners collectively and sew them securely. Use a small sew size to make sure a robust maintain.
4. Urgent the Binding
Flip the binding to the again of the quilt and press it flat utilizing an iron and a urgent material. It will assist to flatten the seams and provides the binding a crisp end.
5. Prime-Stitching the Binding
To safe the binding completely, top-stitch it across the complete quilt. Sew near the sting of the binding, utilizing a small sew size.
6. Ending the Edges
Hem the uncooked edges of the binding by folding them underneath by about 1/4 inch and top-stitching them in place. It will stop fraying and provides the quilt an expert end.
7. Detailed Information to Mitering Corners
| Step | Description |
|---|---|
| 1 | Fold the binding at a 45-degree angle on the nook. |
| 2 | Trim the surplus cloth alongside the folded edge, leaving about 1/4 inch of overlap. |
| 3 | Unfold the binding and fold it the other approach, once more at a 45-degree angle. |
| 4 | Trim the surplus cloth alongside the second folded edge, once more leaving about 1/4 inch of overlap. |
| 5 | Place the 2 mitered edges collectively and sew them securely. |
Binding Corners with Miters
Mitering corners produces lovely, seamless joins that improve the general look of your quilt. Observe these detailed steps for a professional-looking end:
**Supplies:**
Quilt
Binding cloth
Scissors
Iron and ironing board
Thread
Stitching machine
Be aware: To find out the size of binding cloth wanted for both sides, measure the size of the aspect and add 10 inches for mitering.
1. Put together the Binding Strips
Reduce strips of binding cloth based on the lengths calculated for both sides.
2. Fold and Press Binding Strips
Fold every binding strip in half lengthwise, improper sides collectively, and press.
3. Be a part of Binding Strips
Lay two binding strips end-to-end, overlapping 1-2 inches. Sew the strips collectively alongside the folded edge.
4. Put together the Quilt
Lay the quilt flat with the correct aspect dealing with up.
5. Pin the Binding to the Quilt
Beginning on the heart of 1 aspect, pin the binding strip to the quilt edge, proper sides collectively. Ensure that the uncooked edges of the binding are aligned with the uncooked edges of the quilt.
6. Sew the Binding
Beginning on the heart, sew the binding strip to the quilt utilizing a small sew. Fold the binding over the quilt edge and pin it in place as you sew.
7. Trim Extra Binding
When you attain the nook, trim any extra binding 1/4 inch from the miter.
8. Fold and Safe the Miter
Fold the remaining binding over the quilt edge, forming a 45-degree angle. Press the miter flat. Fold the opposite binding strip over the miter, overlapping by 1-2 inches. Sew the strips collectively on the miter to safe it.
| Step | Description |
|—|—|
| a) Trim extra binding | Reduce off extra binding 1/4 inch from the miter. |
| b) Fold binding | Fold remaining binding over quilt edge, forming a 45-degree angle. |
| c) Press miter | Press folded binding flat to create a pointy miter. |
| d) Fold different binding | Convey different binding strip over the miter, overlapping by 1-2 inches. |
| e) Sew | Sew the strips collectively on the miter to safe it. |
9. Repeat for Remaining Corners
Repeat steps 7-8 for the remaining corners of the quilt.
10. Machine Quilt the Binding
As soon as all corners are mitered and secured, machine quilt the binding in place to hide the uncooked edges.
Binding Curves
Binding curves requires some further precision and care to make sure a easy and even end. Here is an in depth step-by-step information for binding curves:
1. Mark the Seam Allowance
Mark the seam allowance on the binding strip, sometimes 1/4 inch.
2. Fold and Press
Fold the binding strip in half lengthwise, with the improper sides collectively, and press.
3. Clip the Corners
Clip the corners of the binding strip at a 45-degree angle, simply previous the seam allowance.
4. Sew Across the Internal Curve
Align the folded fringe of the binding strip with the uncooked fringe of the quilt alongside the interior curve. Begin stitching at the place to begin of the curve and stitch across the complete curve. Preserve the binding taut and stitch as near the sting as attainable.
5. Trim the Extra Binding
Trim the surplus binding strip, leaving about 1/4 inch of overlap at the place to begin.
6. Miter the Outer Nook
Fold the binding strip on the outer nook to create a 45-degree angle. Trim the surplus binding strip on the fold line.
7. Sew the Outer Nook
Align the mitered nook with the uncooked fringe of the quilt on the outer nook. Sew the nook utilizing a blind sew, beginning and ending within the miter.
8. Press the Binding
As soon as the binding is sewn throughout the quilt, press it gently to flatten it.
9. Sew the Binding in Place
Fold the binding over the uncooked fringe of the quilt and sew it down by hand utilizing a blind sew or a machine. Use small, even stitches and hold the binding taut. Trim any extra binding on the beginning and ending factors.
Ending Touches
Trimming the Extra Batting and Backing
Trim the surplus batting and backing to inside 1/4 inch of the quilt prime’s edge. Watch out to not lower into the quilt prime cloth.
Turning Beneath the Binding
Fold the binding strip in half lengthwise, improper sides collectively. Press. Unfold the strip and fold one uncooked edge over to the middle crease. Press once more. Fold the opposite uncooked edge over to satisfy the primary fold, encasing the uncooked edges. Press as soon as extra.
Mitred Corners
On the corners, fold the binding diagonally to kind a 45-degree angle. Convey the brief finish of the binding over the lengthy finish and proceed folding till the surplus size is trimmed away. Press.
Attaching the Binding
Utilizing a blind sew, sew the binding to the quilt prime by hand or machine. The stitches must be small and hidden underneath the fold of the binding.
Edges
Begin by attaching the binding to the middle of 1 edge. Work your approach to the corners, mitering as wanted. Trim any extra binding. Fold the binding to the again of the quilt and hand-stitch it in place.
Corners
To complete the corners, fold the binding to the again of the quilt and miter it. Blind-stitch the binding to the quilt prime. Trim any extra binding.
Urgent
As soon as the binding is hooked up, press the quilt to set the stitches and provides the binding a crisp end.
Last Touches
Examine the quilt for any unfastened threads or imperfections. Make any needed repairs. Fold the quilt and retailer it correctly.
How To Binding Quilt
Binding a quilt is the ultimate step within the quilting course of, and it is an essential one to do effectively. A very good binding will shield the sides of your quilt and hold it wanting its greatest for years to come back.
There are a lot of other ways to bind a quilt, however the commonest methodology is named “machine binding.” Machine binding is comparatively straightforward to do, and it produces a robust, sturdy binding.
To machine bind a quilt, you have to the next provides:
- Binding cloth
- Quilt batting
- Backing cloth
- Quilting thread
- Stitching machine
How To Selecting The Proper Binding Cloth
How to decide on the correct binding cloth
The binding cloth you select must be a sturdy cloth that can stand as much as put on and tear. It must also be a material that you just just like the look of, since it is going to be a outstanding a part of your quilt.
Some good selections for binding cloth embrace:
- Cotton
- Muslin
- Linen
- Flannel
- Denim
It’s also possible to use a mixture of materials to your binding. For instance, you would use a cotton cloth for the highest of the binding and a flannel cloth for the again.
How a lot binding cloth do I want?
To find out how a lot binding cloth you want, you have to to measure the perimeter of your quilt. Upon getting the perimeter, you have to so as to add 10 inches to the measurement. This provides you with sufficient cloth to bind the quilt and switch the corners.
Individuals Additionally Ask
How you can bind a quilt by hand
To bind a quilt by hand, you have to the next provides:
- Binding cloth
- Quilt batting
- Backing cloth
- Quilting thread
- Hand stitching needle
To bind a quilt by hand, comply with these steps:
- Reduce the binding cloth into strips which are 2 1/2 inches broad.
- Fold the binding strips in half lengthwise and press.
- Open the binding strips and place them across the edges of the quilt, proper sides collectively.
- Sew the binding strips to the quilt utilizing a whip sew.
- Flip the binding strips to the again of the quilt and fold them over the sides.
- Hand sew the binding strips to the again of the quilt utilizing a blind sew.
How you can miter a quilt binding
To miter a quilt binding, you have to to chop the binding strips at a 45-degree angle. To do that, mark a 45-degree line on the binding strip and lower alongside the road.
Upon getting lower the binding strips, you may sew them collectively utilizing a mitered seam. To do that, place the 2 binding strips proper sides collectively and align the lower edges. Sew alongside the 45-degree line, beginning and stopping 1/4 inch from the purpose.
Upon getting sewn the mitered seam, flip the binding strips proper aspect out and press. The mitered seam will create a robust, sturdy nook.
