There are quite a few methods to finish a quilt, and understanding the best way to machine bind a quilt is a helpful ability for any quilter. Machine binding is an environment friendly technique to safe the layers of your quilt collectively whereas including an ornamental contact. Better of all, it’s a easy approach that may be simply mastered with a bit of apply. On this complete information, we are going to give you step-by-step directions, useful ideas, and insightful methods to make sure a profitable machine binding expertise.
The great thing about machine binding lies in its versatility. Whether or not you favor a conventional straight sew, a blanket sew, or an ornamental sew, you’ll be able to simply customise the binding to match your quilt’s type. Additionally it is a time-saving approach in comparison with hand binding, permitting you to finish your quilt extra rapidly and effectively. Furthermore, machine binding gives a sturdy and safe end that may stand the take a look at of time, guaranteeing that your quilt stays a cherished heirloom for generations to return.
Earlier than embarking on the machine binding course of, nevertheless, it’s essential to make sure that the quilt is correctly ready. The perimeters must be trimmed evenly, and the quilt high, batting, and backing must be securely layered and basted collectively. This may create a secure basis for the binding and stop puckering or distortion. As soon as the quilt is correctly ready, you’ll be able to proceed with the machine binding course of, following the detailed directions within the subsequent sections of this information. By adhering to the strategies and ideas outlined on this article, you’ll uncover that machine binding is a rewarding and fulfilling approach to full your quilt, including knowledgeable contact and defending your handiwork for years to return.
Choosing the Proper Material
When selecting the proper cloth on your quilt binding, hold the next issues in thoughts:
**Weight and Sturdiness:** The material must be light-weight and simple to deal with, but sturdy sufficient to face up to the wear and tear and tear of use. Think about materials like cotton, cotton blends, or light- to medium-weight canvas.
**Colour and Sample:** The binding ought to complement the quilt’s total design. Select a cloth that coordinates with the quilt’s colours and patterns, or go for a contrasting colour to create a extra placing impact.
**Drape and End:** The material ought to drape properly across the quilt’s edges with out showing cumbersome or stiff. Gentle, drapey materials like silk, voile, or light-weight linen can create a fragile, elegant end.
**Matching and Grading:** Guarantee the material has sufficient width to chop the binding strips with out piecing. Think about the quilt’s dimension and the specified binding width to find out the required cloth yardage.
**Here is a desk summarizing the important thing cloth issues:**
| Material Attribute | Issues |
|---|---|
| Weight and Sturdiness | Light-weight, sturdy (e.g., cotton, cotton blends, canvas) |
| Colour and Sample | Enhances or contrasts the quilt’s design |
| Drape and End | Gentle, drapey (e.g., silk, voile, linen) |
| Matching and Grading | Sufficient width to chop binding strips with out piecing |
Making ready the Batting
The selection of batting can have a big impression on the general really feel, heat, and drape of your quilt. When deciding on batting, take into account elements akin to fiber content material, thickness, and loft. Experiment with differing types to search out the one which most closely fits your required consequence.
To make sure the batting is even, clean, and freed from wrinkles, observe these steps:
1. Lay Out the Batting
Unfold the batting flat on a big floor. Make sure the selvage edges of the batting align with the sides of the backing cloth.
2. Press the Batting
Use a heat iron and a urgent fabric to softly press the batting. This may take away any wrinkles and assist it lie flat. Take care to not over-press, as it might flatten the loft of the batting.
| Batting Fiber Content material | Traits |
|---|---|
| Cotton | Pure, breathable, sturdy; gives good insulation |
| Polyester | Artificial, hypoallergenic, machine-washable; retains loft effectively |
| Wool | Pure, heat, moisture-wicking; might be costly |
| Bamboo | Sustainable, breathable, anti-bacterial; much like cotton in really feel |
| Tencel | Pure, comfortable, absorbent; good different to silk or cotton |
Layering and Pinning the Quilt
As soon as the quilt high and backing are full, it is time to layer and pin them collectively. This step ensures that the layers are aligned and keep in place throughout quilting.
Layering the Quilt
Place the quilt high on a flat floor, proper facet up. Middle the quilt backing on high of the quilt high, proper facet down.
Pinning the Quilt
Utilizing sharp pins, pin the layers collectively across the edges, ranging from the middle and dealing your manner outward. Insert the pins perpendicular to the quilt, guaranteeing they undergo all three layers.
Pinning Method:
| Pinning Model | Description |
|---|---|
| Vertical | Pins are inserted perpendicular to the quilt, making a straight line. |
| Diagonal | Pins are inserted at a diagonal angle, making a safe maintain. |
| Crosswise | Pins are inserted in a cross form, offering further stability. |
Pin Placement:
- House pins roughly 2-3 inches aside.
- Pin across the perimeter of the quilt, in addition to in any areas the place there are sharp angles or curves.
- Keep away from pinning by way of any elaborations or ornamental components.
Guaranteeing the layers are correctly pinned will assist forestall shifting and puckering throughout quilting.
Selecting the Machine Sew
Choosing the suitable machine sew for binding your quilt is essential. Think about the next elements:
Thread Rely and Weight
Select a thread rely that matches the material weight of your quilt. A better thread rely gives higher sturdiness for heavier materials.
Sew Size
Alter the sew size to the scale of your quilt and the specified binding width. An extended sew size creates a extra informal look, whereas a shorter sew size gives higher precision.
Sew Sample
There are numerous sew patterns appropriate for machine binding. Here is a desk summarizing the commonest choices:
| Sew Sample | Description |
|---|---|
| Straight Sew | A easy and safe sew that’s simple to regulate. |
| Zigzag Sew | Offers additional power and suppleness, stopping the binding from unraveling. |
| Blind Hem Sew | Create an invisible end by concealing the sew line on the entrance of the quilt. |
Needle Sort
Use a pointy needle designed for quilting. Think about a denim or leather-based needle for thicker materials to stop needle breakage.
Setting the Machine Rigidity
Guaranteeing correct machine stress is essential for optimum binding outcomes. Here is a step-by-step information to setting the strain:
1. Thread the Machine
Thread your stitching machine with the thread you may use for binding. Wind a bobbin with the identical thread.
2. Set the Rigidity Dial
Find the strain dial in your stitching machine. For quilting tasks, a stress setting of 4-5 is usually beneficial.
3. Create Take a look at Stitches
Sew a couple of take a look at stitches on a scrap cloth. The stitches ought to neither be too unfastened nor too tight.
– If the stitches are too unfastened, enhance the strain by turning the dial clockwise.
– If the stitches are too tight, lower the strain by turning the dial counterclockwise.
4. Take a look at the Binding
As soon as the take a look at stitches look good, connect the binding to a quilt sandwich. Sew a brief part and verify the strain. If the binding is puckering or pulling, regulate the strain accordingly.
5. High-quality-Tuning the Rigidity
To realize essentially the most exact stress, take into account the next elements:
| Material Sort | Rigidity Setting |
|---|---|
| Quilting Cotton | 4-5 |
| Flannel or Minky | 3-4 |
| Silk or Satin | 2-3 |
| Heavyweight Canvas | 5-6 |
Keep in mind that these are tips, and chances are you’ll want to regulate the strain barely based mostly in your particular cloth and machine.
Binding the Quilt
Step 1: Fold the Binding in Half
Align the uncooked edges of the binding and fold it in half lengthwise, with the flawed sides collectively. Iron the crease to safe the fold.
Step 2: Pin the Binding to the Quilt
Beginning on the middle of 1 edge, pin the folded binding to the sting of the quilt, proper sides collectively. The uncooked fringe of the binding must be aligned with the uncooked fringe of the quilt.
Step 3: Sew the Binding
Utilizing a 1/4-inch seam allowance, sew alongside the folded fringe of the binding, catching each the binding and the quilt.
Step 4: Fold the Binding Over and Pin
After getting sewn across the quilt, fold the binding over the uncooked fringe of the quilt and pin it in place alongside the again.
Step 5: Sew the Binding to the Again
Utilizing a 1/8-inch seam allowance, sew across the quilt as soon as extra to safe the binding to the again. Begin and cease a couple of inches from the place you started to go away a spot for turning.
Step 6: Flip and Topstitch the Binding
To realize a clear {and professional} end, flip the quilt proper facet out by way of the hole you left. Tuck the uncooked edges of the binding inside and pin them in place. Utilizing a straight sew, topstitch across the complete quilt, catching each the binding and the quilt. This may safe the binding and provides it a sophisticated look.
| Binding Width | Completed Width |
|---|---|
| 2 1/4 inches | 1/2 inch |
| 3 inches | 1 inch |
| 3 1/2 inches | 1 1/2 inches |
Ending the Binding
7. Mitering the Corners
For a professional-looking end, miter the corners of the binding earlier than stitching it down. Here is a step-by-step information:
– Measure and mark 1 1/2 inches from the nook on each edges of the binding.
– Fold the binding in half on the mark and crease.
– Carry the 2 uncooked edges of the binding collectively to type a 45-degree angle.
– Fold the opposite finish of the binding over the mitered nook and match the uncooked edges.
– Press the nook flat and safe it with Surprise Clips or pins to maintain it in place.
Tip: For simpler mitering, use a miter ruler or a mitering instrument particularly designed to information you in chopping and folding the binding.
– Repeat this course of for the remaining three corners.
| Nook | Steps |
|---|---|
| 1 | Measure and mark 1 1/2 inches from the nook on each edges of the binding. |
| 2 | Fold the binding in half on the mark and crease. |
| 3 | Carry the 2 uncooked edges of the binding collectively to type a 45-degree angle. |
| 4 | Fold the opposite finish of the binding over the mitered nook and match the uncooked edges. |
| 5 | Press the nook flat and safe it with Surprise Clips or pins. |
Machine Binding Ideas
Utilizing a Binding Foot
A binding foot makes it simple to stitch binding in your quilt. It has a small information that helps you retain the binding straight and even.
Selecting the Proper Needle
Use a pointy needle that’s the proper dimension on your cloth. A too-small needle will trigger the material to pucker, whereas a too-large needle will create holes.
Stitching Size
Use a sew size of two.5 to three.0 mm. This may create a robust, safe sew that won’t come undone.
Urgent
Press the binding as you sew it to assist it lay flat. Urgent will even assist to stop the binding from puckering.
Mitering Corners
Whenever you come to a nook, you have to to miter the binding. This implies folding the binding at a 45-degree angle and stitching it down. Listed below are step-by-step directions on the best way to miter a nook:
- Fold the binding in half at a 45-degree angle, with the folded edge dealing with the quilt.
- Sew the binding down, beginning on the nook and stitching to the sting of the quilt.
- Fold the binding over the sting of the quilt and stitch it down, beginning on the nook and stitching to the sting of the quilt.
- Trim the surplus binding on the nook.
Including a Hanging Sleeve
If you wish to add a dangling sleeve to your quilt, you are able to do so earlier than you bind it. Listed below are step-by-step directions on the best way to add a dangling sleeve:
- Minimize two items of material which might be 4 inches broad and the size of your quilt.
- Fold each bit of material in half lengthwise and press.
- Open up one piece of material and lay it on high of the quilt, with the uncooked edges aligned with the highest fringe of the quilt.
- Fold the opposite piece of material over the primary piece and press.
- Sew across the edges of the hanging sleeve, leaving a small opening for turning.
- Flip the hanging sleeve proper facet out and press.
- Topstitch across the edges of the hanging sleeve.
Ending the Binding
After getting sewn the binding across the complete quilt, you have to to complete it. Listed below are step-by-step directions on the best way to end the binding:
| Step | Directions |
|---|---|
| 1 | Fold the binding over the sting of the quilt and stitch it down, beginning on the nook and stitching to the sting of the quilt. |
| 2 | Trim the surplus binding on the nook. |
| 3 | Repeat steps 1 and a couple of for the remaining three corners. |
| 4 | Press the binding. |
| 5 | Topstitch across the edges of the binding. |
Troubleshooting Frequent Issues
Needle Breaking
Use a pointy needle particularly designed for quilting. Make sure the needle is inserted appropriately and is the suitable dimension for the material and thread. Think about using a bigger needle dimension or a heavier thread weight.
puckering
Guarantee the material is taught as you sew. Alter the strain settings in your machine, rising the highest thread stress or reducing the bobbin stress. Use a strolling foot or a sew with a better sew density, akin to a straight sew or a zigzag sew.
Rigidity Issues
Alter the highest thread stress or bobbin stress to create even stitches. If the highest thread is just too unfastened, tighten the highest stress; if the bobbin thread is just too unfastened, tighten the bobbin stress.
Binding Not Flat
Make sure the binding is evenly distributed across the quilt edge. Alter the strain or sew size to stop the binding from puckering or gathering. Think about using a double-fold binding approach for a safer and even end.
Uneven Stitching
Examine the needle and stress settings. Be sure the needle is sharp and the strain is appropriate. Use a strolling foot or a sew with a better sew density to stop skipping stitches.
Material Fraying
Use a pointy needle and high-quality thread designed for quilting. Alter the sew size or stress to stop the material from fraying. Think about using a backing cloth or interfacing to strengthen the quilt edge.
Binding Not Stays Safe
Make sure the binding is folded over the uncooked fringe of the quilt by a minimum of 1/4 inch and stitched securely. Think about using machine quilting strategies, akin to mitered corners or machine binding, for a sturdy {and professional} end.
Quilt Not Sq.
Measure the quilt fastidiously earlier than binding and trim any uneven edges. Use a quilting sq. or ruler to make sure the binding is evenly distributed across the quilt.
Binding Tucks In
Enhance the sew size or regulate the strain to stop the binding from tucking in. Think about using a strolling foot or a sew with a better sew density to make sure safe stitching.
Machine Quilting: A Information to Binding Your Masterpiece
As soon as you’ve got accomplished the quilting course of, the ultimate step is to bind the quilt, giving it knowledgeable end and a contact of private type.
Supplies You may Want:
- Binding cloth
- Backing cloth
- Thread
- Measuring tape
- Rotary cutter or scissors
- Stitching machine
- Iron and ironing board
Step-by-Step Directions:
1.
Put together the Binding Strips
Minimize strips of binding cloth which might be 2.5 inches broad. The size of the strips will rely on the scale of your quilt.
2.
Sew the Binding Strips Collectively
Sew the binding strips collectively end-to-end, utilizing a diagonal seam allowance for a seamless look.
3.
Connect the Binding to the Quilt
Fold the binding strip in half and pin it to the sting of the quilt, aligning the uncooked edges. Sew alongside the folded fringe of the binding.
4.
Trim the Extra Binding
Trim any extra binding from the corners of the quilt.
5.
Fold the Binding to the Again
Fold the binding over to the again of the quilt and pin it in place.
6.
Sew the Binding to the Again
Sew alongside the folded fringe of the binding, securing it to the again of the quilt.
7.
Miter the Corners
To create a neat and tidy end on the corners, miter the binding by folding it diagonally and stitching it in place.
8.
Safe the Binding
Hand-stitch or machine-stitch the ends of the binding collectively to safe it.
9.
Press the Quilt
Press the quilt to flatten the binding and provides it knowledgeable look.
Get pleasure from Your Masterpiece
Congratulations! You have efficiently certain your quilt utilizing a machine. Now you’ll be able to benefit from the magnificence and luxury of your handmade masterpiece for years to return.
Tips on how to Bind a Quilt by Machine
Binding a quilt by machine is a vital ending step that secures the sides and provides a sophisticated contact to your undertaking. Here is a step-by-step information that can assist you obtain a professional-looking bind:
- Put together the Quilt: Trim any extra batting or cloth across the edges of the quilt to make sure a clear and even end.
- Create the Binding Strips: Minimize bias strips of material measuring 2 1/2 inches broad. The size of every strip will range relying on the scale of your quilt. Be a part of the strips collectively utilizing a diagonal seam to make a steady binding.
- Connect the Binding: Pin the binding across the edges of the quilt, aligning the uncooked fringe of the binding with the uncooked fringe of the quilt high. Machine sew across the quilt, near the fold of the binding, utilizing a slim zigzag sew or a straight sew with a small sew size.
- Miter the Corners: To create a neat end on the corners, fold the binding diagonally at a 45-degree angle and trim the surplus. Align the folded fringe of the binding with the adjoining edge and sew it down.
- Machine Fold the Binding: As soon as the binding is connected, fold it over to the again of the quilt and machine sew alongside the sting of the quilt, near the earlier stitching. This may safe the binding and provides it knowledgeable look.
Individuals Additionally Ask
How do you bind a quilt with no binding instrument?
You possibly can bind a quilt with no binding instrument through the use of a easy fold-over approach. Pin the binding across the edges of the quilt and fold it over to the again. Machine sew alongside the sting of the quilt, near the fold of the binding.
What’s one of the best ways to hitch quilt binding strips?
Bias Becoming a member of:
Minimize bias strips of material and be part of them collectively utilizing a diagonal seam. This technique prevents fraying and creates a extra skilled end.
Straight Becoming a member of:
Minimize straight strips of material and be part of them along with a straight seam. Align the sides fastidiously to make sure a clean joint.
How do you hand bind a quilt?
Hand binding a quilt entails stitching the binding across the edges of the quilt by hand. This technique provides a extra conventional and complex look. Use a small needle and powerful thread to safe the binding.
