If the evaporator fan motor in your Electrolux LFHT2131QE1 fridge has failed, you will want to interchange it to revive correct cooling. Changing the evaporator fan motor is a comparatively easy restore that may be accomplished in about an hour with a couple of primary instruments. Changing a damaged evaporator fan motor in an Electrolux mannequin LFHT2131QE1 is an easy activity that may be accomplished with a couple of easy steps. Let’s get began.
First, you will have to unplug the fridge and take away the again panel. Find the evaporator fan motor, which is often mounted on the again of the fridge close to the underside. As soon as you have situated the motor, disconnect {the electrical} connector and take away the mounting screws. Rigorously take away the motor from the fridge. Then, take the brand new evaporator fan motor and insert it instead of the previous one. Safe it with the mounting screws and reconnect {the electrical} connector. Lastly, exchange the again panel and plug the fridge again in. Your fridge ought to now be cooling correctly once more.
Changing the evaporator fan motor in your Electrolux LFHT2131QE1 fridge is a straightforward restore that may be accomplished in about an hour. By following these steps, it can save you the price of calling a repairman and get your fridge again up and operating shortly.
Finding the Evaporator Fan Motor
The evaporator fan motor is a vital part of your Electrolux LFHT2131QE1 fridge, because it circulates chilly air all through the equipment and helps preserve the optimum temperature for preserving meals.
To entry the evaporator fan motor, it’s worthwhile to find the evaporator coil, which is often located behind the rear panel of the fridge’s freezer compartment. The evaporator fan motor is often mounted on the facet of the evaporator coil or contained in the freezer compartment.
Here is an in depth information to finding the evaporator fan motor:
- Unplug the fridge and empty the freezer part: Earlier than you start engaged on the fridge, disconnect it from the facility supply and take away any meals objects from the freezer.
- Take away the rear panel of the freezer compartment: Use a screwdriver to take away the screws holding the rear panel in place. Rigorously raise the panel off and set it apart.
- Find the evaporator coil: The evaporator coil is an oblong steel grid situated behind the freezer compartment. It’s sometimes coated with a skinny layer of frost or ice.
- Establish the evaporator fan motor: The evaporator fan motor is often mounted on the facet of the evaporator coil or contained in the freezer compartment. It’s a small, black motor with a fan blade hooked up to it.
| Device Required |
|---|
| Screwdriver |
Eradicating the Fan Motor Mount Screws
To entry the evaporator fan motor in your Electrolux Lfht2131qe1 fridge, it’s worthwhile to take away the fan motor mount screws first. Here is a step-by-step information:
- Find the fan motor mount screws. They’re often situated on the again or facet of the fridge, close to the evaporator coils.
- Unplug the fridge. It is a security precaution to stop electrical shock.
- Take away the again or facet panel of the fridge. This gives you entry to the fan motor mount screws.
- Establish the fan motor mount screws. They’re often small, Phillips-head screws.
- Use a screwdriver to take away the fan motor mount screws. Watch out to not strip the screws.
Here’s a desk of the sizes and places of the screws that you could be encounter:
| Screw Dimension | Location |
|---|---|
| #8 x 1/2″ | Again of fridge, close to the evaporator coils |
| #10 x 3/4″ | Aspect of fridge, close to the evaporator coils |
- As soon as the fan motor mount screws are eliminated, you may entry the evaporator fan motor.
Inspecting the Fan Motor for Injury
Inspecting the fan motor is a vital step in troubleshooting issues together with your Electrolux fridge’s cooling system. Here is an in depth information on the best way to examine the fan motor for injury:
1. **Unplug the fridge:** Earlier than you start, unplug the fridge from the facility outlet for security.
2. **Find the fan motor:** The evaporator fan motor is often situated behind the again panel of the freezer compartment or behind the decrease kickplate of the fridge.
3. **Take away the again panel or kickplate:** Rigorously take away the screws or clips holding the again panel or kickplate in place.
4. **Disconnect {the electrical} connector:** Unplug {the electrical} connector resulting in the fan motor.
5. **Take away the mounting screws:** Find and take away the screws securing the fan motor to the housing.
6. **Visually examine the motor:** Totally look at the motor housing, blades, and electrical connections for any indicators of harm, corresponding to cracks, burn marks, or unfastened wires.
7. **Test for continuity:** Utilizing a multimeter set to the ohms scale, take a look at for continuity between the terminals on the fan motor. There ought to be a low resistance studying if the motor is functioning correctly. If the studying is excessive or infinite, the motor could also be defective.
8. **Examine the blades:** Study the fan blades for any injury, corresponding to bent or lacking blades. Be certain that the blades rotate freely with out obstruction.
9. **Reassemble the fan motor:** If no injury is discovered, reassemble the fan motor by following the steps in reverse order.
Reassembling the Fridge Elements
Step 1: Join the Evaporator Fan Motor Wires
Reconnect the grey wire to the terminal block screw on the left, and the blue wire to the screw on the appropriate.
Step 2: Insert the New Evaporator Fan Motor Unit
Align the motor with the mounting holes within the evaporator fan housing and gently push it into place.
Step 3: Screw within the Evaporator Fan Motor
Safe the motor with the 2 screws and ensure they’re tightened snugly.
Step 4: Reinstall the Evaporator Fan Housing
Place the housing again into the fridge and slide it into the slots till it snaps into place.
Step 5: Safe the Evaporator Fan Housing
Screw within the two screws on the high of the housing to maintain it in place.
Step 6: Join the Evaporator Fan Motor Harness
Plug the harness from the motor into the connector on the principle management board and push it in securely.
Step 7: Reinstall the Cabinets and Drawers
Exchange the cabinets and drawers that had been eliminated for entry.
Step 8: Reconnect the Fridge
Plug the fridge again into the facility outlet and switch it on.
Step 9: Troubleshooting Verification
Confirm Operation:
– Test if the evaporator fan motor is operating easily and quietly.
– Monitor the fridge temperature to make sure it’s cooling correctly.
– Hear for any uncommon noises or vibrations which will point out an issue.
| Troubleshooting Ideas |
|---|
| – If the motor shouldn’t be operating, examine {the electrical} connections and make sure the energy provide is enough. |
| – If the fridge shouldn’t be cooling, the evaporator coil could also be frozen or there may very well be a refrigerant leak. |
| – If there are extreme noises or vibrations, the motor could also be faulty or improperly put in. |
Learn how to Entry Evaporator Fan Motor Electrolux LFHT2131QE1
Accessing the evaporator fan motor in an Electrolux fridge mannequin LFHT2131QE1 may be achieved by following these steps:
- Unplug the fridge from the facility outlet.
- Open the freezer door and find the evaporator cowl behind the freezer compartment. It’s sometimes held in place by screws or clips.
- Take away the evaporator cowl to reveal the evaporator coils and the fan motor.
- Find the evaporator fan motor, which is often mounted on the facet of the evaporator coils.
- Disconnect {the electrical} connector from the fan motor.
- Take away the mounting screws that maintain the fan motor in place.
- Rigorously raise the fan motor out of its housing.
To reassemble, merely reverse the steps above. Be certain that all electrical connections are safe and that the fan motor is correctly mounted earlier than plugging the fridge again into the facility outlet.
