9 Simple Steps To Remove Ring Doorbell • guesswatches.com

Ring doorbells are a good way to regulate your own home and deter burglars, however there might come a time when it is advisable to take away it. Whether or not you are shifting, changing it with a brand new mannequin, or just want to scrub it, we’ll present a complete information on tips on how to take Ring doorbell off effortlessly.

Earlier than you start, it is important to assemble the required instruments and security gear. You may want a screwdriver, a pair of pliers (non-compulsory), and a step stool or ladder for reaching greater installations. Moreover, guarantee you will have security glasses and gloves to guard your self from potential hazards whereas working with electrical parts.

Upon getting your instruments prepared, find the mounting bracket of the Ring doorbell. Usually, it will be connected to the wall or door body utilizing screws or bolts. Use the screwdriver to unscrew these fasteners rigorously, supporting the doorbell with one hand to forestall it from falling. Disconnect {the electrical} wires by gently pulling them aside. Be sure to cap off the uncovered wires utilizing electrical tape for security. Lastly, elevate the Ring doorbell off the mounting bracket and retailer it in a safe location.

Eradicating the Faceplate

Earlier than you’ll be able to take away the doorbell from its mount, it is advisable to take away the faceplate. Here is tips on how to do it:

Find the small screw on the backside of the faceplate. Use a screwdriver to loosen the screw.

As soon as the screw is free, gently pull the faceplate away from the doorbell. Watch out to not pull too laborious, because the wires connecting the faceplate to the doorbell are delicate.

As soon as the faceplate is eliminated, you will notice the 2 wires that join it to the doorbell. Disconnect the wires by gently pulling them aside.

Now that the faceplate is eliminated, you’ll be able to transfer on to eradicating the doorbell from its mount.
Warning: Earlier than eradicating the faceplate, make sure that to energy down the doorbell on the breaker. Failure to take action might lead to electrical shock.

Tip: If you’re having hassle eradicating the faceplate, you’ll be able to strive utilizing a plastic spudger or a small flathead screwdriver to softly pry it off.

Instruments You may Want:
Phillips head screwdriver
Plastic spudger or small flathead screwdriver (non-compulsory)

Disconnecting the Wires

Earlier than disconnecting the wires, it is vital to make sure the Ring Doorbell is powered off and disconnected from the facility supply. Observe these steps to securely take away the doorbell:

Step 1: Take away the protection screw

Find the only screw on the underside of the Ring Doorbell. Use a Phillips head screwdriver to take away the screw.

Step 2: Gently pull the unit in direction of you

As soon as the screw is eliminated, gently grasp the underside of the Ring Doorbell and pull it in direction of you. It ought to simply come off the mounting bracket.

Step 3: Disconnect the wires

The Ring Doorbell has two wires: crimson and black. To disconnect the wires, comply with these steps:

Wire Colour

Steps

Purple

Gently press the tab on the connector and pull the wire straight out.

Black

Repeat the method to disconnect the black wire.

Step 4: Reattach the protection screw

As soon as the wires are disconnected, reattach the protection screw to the underside of the Ring Doorbell. It will safe the unit and stop any unintentional detachment.

Unscrewing the Mount

To unscrew the mount, you will want a Phillips #2 screwdriver. First, find the 2 screws which might be holding the mount in place. They’re sometimes positioned on the underside of the mount. Upon getting discovered the screws, merely use the screwdriver to unscrew them. Watch out to not overtighten the screws, as this might injury the mount or the doorbell.

As soon as the screws are free, you’ll be able to rigorously pull the mount away from the wall. The doorbell ought to now be free and you may take away it from the mount.

Listed below are some extra ideas for unscrewing the mount:

If the screws are notably tight, you might want to make use of a pair of pliers to loosen them.
Watch out to not drop the doorbell if you end up eradicating it from the mount.
If you’re having any hassle unscrewing the mount, you’ll be able to contact Ring buyer assist for help.

Eradicating the Battery (if relevant)

Some Ring doorbells require a battery for operation, whereas others are powered by a wired connection. In case your doorbell makes use of a battery, you will want to take away it earlier than continuing to the subsequent steps.

Find the battery launch button, which is normally positioned on the underside or again of the doorbell.
Press and maintain the discharge button whereas sliding the battery out of its compartment.
Eliminate the outdated battery correctly and insert a brand new one into the compartment, making certain correct polarity.
Slide the battery again into place and launch the discharge button.

Detaching the Speaker

Step 1: Take away the Safety Screw

Find the safety screw on the underside of the doorbell. Use a screwdriver to take away the screw and set it apart.

Step 2: Unclip the Speaker

Rigorously elevate the underside of the speaker housing away from the bottom of the doorbell. There are spring-loaded clips holding it in place. Use a small screwdriver or pry software to softly launch the clips.

Step 3: Disconnect the Speaker Wire

Find the speaker wire related to the bottom of the doorbell. Gently pull the wire straight as much as detach it. Keep away from pulling on the wires themselves, as they are often fragile.

Step 4: Take away the Speaker Housing

Utilizing the pry software, rigorously separate the speaker housing from the bottom of the doorbell. The housing could also be barely adhered, so apply light drive.

Step 5: Unscrew the Speaker

Contained in the housing, find the 2 screws holding the speaker in place. Unscrew them and gently elevate the speaker out.

Step 6: Disconnect the Speaker Cable (Wired Doorbells Solely)

For wired doorbells, a further step is required.

For Doorbells with a Fast Launch Cable	For Doorbells with a Screw Terminal Cable
Find the speaker cable and squeeze the discharge tab to disconnect it.	Find the screw terminal and loosen the screws to disconnect the cable.

Taking Aside the Housing

The Ring Doorbell housing consists of a entrance plate and a again plate. To disassemble the housing and entry the doorbell’s inner parts:

Find the discharge button on the entrance plate, which is usually on the facet or backside.
Press and maintain the discharge button whereas gently pulling the entrance plate in direction of you.
Unclip the entrance plate from the rear plate.
As soon as the entrance plate is eliminated, you will have entry to the doorbell’s wires and mounting screws.
Disconnect the doorbell wires by gently pulling them out of the terminals.
Unscrew the mounting screws to detach the doorbell from the mounting bracket.
Rigorously elevate the doorbell away from the mounting bracket.

Instrument	Description
Phillips screwdriver	For eradicating the mounting screws
Torx screwdriver	For eradicating the safety screws (in some fashions)
Plastic opening software	For prying open the housing (non-compulsory)

Changing the Battery or Wiring (if essential)

It is vital to make sure that your Ring Doorbell has adequate energy to perform correctly. If the battery wants changing or the wiring requires consideration, comply with these steps:

Checking Battery Life

To verify the battery stage, open the Ring app, faucet the “Gadgets” tab and choose your doorbell. The battery icon will point out the present energy standing.

Changing the Battery

To switch the battery, find the 2 screws beneath the doorbell and take away them. Gently pull the doorbell off the mounting plate, expose the battery, and swap it with a brand new one. Reattach the doorbell to the plate and safe it with the screws.

Connecting to Energy

Should you want a wired connection, an electrician can help with putting in a transformer and connecting the doorbell to your own home’s electrical system. It will present steady energy with out the necessity for battery replacements.

Wiring Specs

Wire Colour	Function
Purple	Energy
White or Black	Impartial
Inexperienced	Floor

Observe the directions included along with your doorbell for particular wiring particulars.

Reinstalling the Ring Doorbell

Upon getting eliminated the Ring Doorbell from its mount, you’ll be able to reinstall it by following these steps:

1. Insert the included mounting bracket into the again of the Ring Doorbell.

2. Place the Ring Doorbell on the mounting bracket and tighten the screws.

3. Resolve the place you need to mount the Ring Doorbell on the wall. Use the included screws to safe the mounting bracket to the wall.

4. Slide the Ring Doorbell onto the mounting bracket and tighten the screw.

5. Join the wires to the terminals on the again of the Ring Doorbell. The crimson wire connects to the terminal labeled “R,” and the black wire connects to the terminal labeled “C.”

6. Insert the battery into the Ring Doorbell.

7. Take a look at the Ring Doorbell to verify it’s working correctly.

8. Obtain the Ring app in your smartphone and create an account.

9. Observe the directions within the app to attach your Ring Doorbell to your Wi-Fi community, full the setup course of, and entry stay footage and different options.

Testing the Ring Doorbell

Earlier than eradicating your Ring Doorbell, it is important to check it to make sure it is functioning accurately. Listed below are the steps to comply with:

1. Test the Energy

Confirm that the Ring Doorbell is receiving energy by urgent the entrance button. If the sunshine ring flashes and also you hear a chime, the doorbell is powered.

2. Take a look at the Connectivity

Open the Ring app in your smartphone. Choose your Ring Doorbell from the record of gadgets. If the app connects and exhibits a stay view from the doorbell’s digital camera, the connectivity is established.

3. Take a look at the Movement Detection

Wave your hand in entrance of the doorbell or stroll previous it. If the doorbell detects the movement and sends a notification to your telephone, the movement detection is working.

4. Take a look at the Chime

When you’ve got a Ring Chime related to your doorbell, press the button on the entrance of the doorbell and hear for the chime at your chime gadget.

5. Take a look at the Night time Imaginative and prescient

At evening, cowl the doorbell’s lens along with your hand and see if the evening imaginative and prescient activates. You will note a black and white picture within the Ring app.

6. Take a look at the Two-Means Discuss

Press the microphone icon within the Ring app and converse into your telephone’s microphone. It’s best to hear your voice coming from the doorbell’s speaker.

7. Take a look at the Reside View

Open the Ring app and faucet “Reside View” to entry a real-time video feed from the doorbell’s digital camera.

8. Take a look at the Recording

When you’ve got a Ring Shield subscription, set off an occasion (e.g., movement detection) and verify the Ring app for recorded footage.

9. Take a look at the Alerts

Arrange movement detection and chime alerts within the Ring app. Set off an occasion and verify if you happen to obtain notifications in your telephone and e-mail.

10. [Additional Testing for Wired Doorbells]

For wired doorbells:

Take a look at	Description
Take away energy from the doorbell	Flip off the circuit breaker or take away the fuse that powers the doorbell.
Disconnect the wires	Rigorously detach the wires from the terminals on the again of the doorbell.
Reconnect the wires	Reconnect the wires to the right terminals on the again of the doorbell.
Restore energy to the doorbell	Activate the circuit breaker or change the fuse to revive energy.
Take a look at the doorbell	Press the entrance button on the doorbell and confirm that it’s functioning accurately.

Find out how to Take Ring Doorbell Off

There are a couple of the reason why you might have to take your Ring doorbell off. Perhaps you are shifting, or possibly you are simply having some hassle with it. Regardless of the purpose, listed here are the steps on tips on how to take your Ring doorbell off:

Flip off the facility to your Ring doorbell on the breaker.
Take away the 2 screws which might be holding the faceplate on.
Gently pull the faceplate off of the wall.
Disconnect the wires from the again of the doorbell.
Take away the doorbell from the wall.

Upon getting eliminated your Ring doorbell, you’ll be able to retailer it in a secure place till you want it once more.

Folks Additionally Ask

How do I reset my Ring doorbell?

To reset your Ring doorbell, press and maintain the orange button on the again of the gadget for 10 seconds. The doorbell will then reset and you will want to set it up once more.

How do I alter the battery in my Ring doorbell?

To alter the battery in your Ring doorbell, take away the 2 screws which might be holding the faceplate on. Then, gently pull the faceplate off of the wall. The battery is positioned on the again of the doorbell. Disconnect the wires from the battery after which take away the battery. Insert the brand new battery and reconnect the wires. Lastly, put the faceplate again on and tighten the screws.

How do I troubleshoot my Ring doorbell?

If you’re having hassle along with your Ring doorbell, there are some things you’ll be able to attempt to troubleshoot the problem. First, verify to ensure that the doorbell is correctly related to your Wi-Fi community. If the doorbell shouldn’t be related to Wi-Fi, it will be unable to perform correctly. You can too strive restarting your doorbell by urgent and holding the orange button on the again of the gadget for 10 seconds. If the doorbell continues to be not working correctly, you might have to contact Ring assist for additional help.