Quilting binding is the ultimate step in finishing a quilt, and it is a crucial a part of the method. It not solely finishes the sting of the quilt, nevertheless it additionally provides sturdiness and a contact of character. There are a lot of totally different quilt binding strategies to select from, plus quite a lot of supplies that can be utilized for the binding cloth. This text will present a step-by-step information on the right way to quilt bind by hand, probably the most widespread binding strategies. This information will give you all of the methods it’s worthwhile to create a phenomenal and sturdy binding on your quilt.
To start, you will have to collect your supplies. You’ll need a quilt that’s already quilted and trimmed, binding cloth, a needle, and thread. You may additionally need to use a thimble to guard your fingers. Upon getting your supplies, you possibly can start the binding course of. First, you will have to chop your binding cloth strips. The strips ought to be reduce to the width of your required binding, plus 1/2 inch for seam allowances. The size of the strips will differ relying on the scale of your quilt. Upon getting reduce your binding cloth strips, you possibly can start stitching them collectively. The strips ought to be sewn collectively end-to-end, utilizing a 1/4 inch seam allowance. Proceed stitching the strips collectively till you’ve got a steady piece of binding that’s barely longer than the perimeter of your quilt.
Supplies and Instruments for Quilt Binding
Cloth
Backing Cloth:
The backing cloth, which is the biggest piece of cloth that serves as the bottom of the quilt. It ought to be barely bigger than the quilt prime to permit for shrinkage and for securing the quilt prime to the batting and backing. Select a material that enhances the quilt prime and is sturdy sufficient to face up to repeated use and washing.
Binding Cloth:
The binding cloth, which is a strip of cloth that encloses the uncooked edges of the quilt. It ought to be at the very least 2.5 inches extensive to offer sufficient protection and sturdiness. Choose a material that coordinates with the quilt prime and backing, and that enhances the general design of the quilt.
Batting:
The batting, which is the insulating layer between the quilt prime and the backing. It gives heat, loft, and form to the quilt. Select a batting materials that fits the specified weight and thickness of the quilt, resembling cotton, wool, or artificial.
Instruments
Stitching Machine:
A stitching machine is crucial for stitching the binding to the quilt. It ought to be in good working situation and able to dealing with a number of layers of cloth.
Needle:
Use a pointy needle that’s applicable for the kind of cloth used. A measurement 10 or 12 needle is often appropriate for many quilt materials.
Thread:
Select thread that matches the colour of the binding cloth and that’s sturdy sufficient to carry the binding securely in place. A 100% cotton thread is commonly used for quilting.
Quilting Clips or Pins:
Quilting clips or pins are used to carry the binding in place whereas stitching. Clips are usually simpler to make use of and supply a safer maintain than pins.
Iron and Ironing Board:
An iron and ironing board are needed for urgent the binding as you sew it onto the quilt. This helps to create a neat {and professional} end.
Different Helpful Instruments:
Different helpful instruments embody a seam ripper for eradicating stitches, a measuring tape for correct measurements, and a ruler or template for chopping the binding strips.
Selecting a Binding Cloth and Model
The selection of binding cloth and magnificence can vastly have an effect on the general feel and appear of your quilt. Listed below are some components to think about when making your choice:
Binding Cloth
The material you select on your binding ought to be sturdy and coordinate nicely with the quilt prime and backing. Take into account the next choices:
1. Matching cloth: The binding will be constituted of the identical cloth because the quilt prime or backing.
2. Coordinating cloth: A cloth that enhances the colours and patterns of the quilt prime.
3. Distinction cloth: A cloth that creates a daring distinction with the quilt prime.
4. Printed cloth: A cloth with a sample that provides curiosity to the binding.
5. Textured cloth: A cloth with a textured floor, resembling corduroy or denim.
6. Striped or plaid cloth: A cloth with stripes or plaids can add a novel contact to the binding.
Binding Model
The type of binding you select will decide how the binding is hooked up to the quilt. Listed below are a few of the hottest binding kinds:
| Binding Model |
|---|
| Conventional binding |
| Bias binding |
| Double fold binding |
| Machine stitched binding |
| Hand stitched binding |
Every binding type has its personal benefits and downsides. Conventional binding is the commonest and best to do, whereas bias binding is extra sturdy and provides an ornamental contact. Double fold binding is an efficient alternative for quilts that will likely be washed ceaselessly, and machine stitched binding is a fast and simple choice. Hand stitched binding is probably the most time-consuming however offers probably the most skilled end.
Reducing and Becoming a member of the Binding Strips
Earlier than chopping the binding strips, you will have to calculate how a lot cloth you want. Usually, you will want sufficient binding to wrap across the perimeter of the quilt twice, plus 10-12 inches for becoming a member of and ending. For instance, for a quilt that measures 60″ x 72″, you’d reduce 4 binding strips which might be 168 inches lengthy (60″ + 72″ + 60″ + 72″ + 10″).
The width of the binding strips will rely upon how extensive you need the completed binding to be. If you would like a binding that’s 1″ completed, reduce the strips 2.5″ extensive. For a 1.5″ completed binding, reduce the strips 3″ extensive.
Upon getting decided how a lot and what measurement cloth to chop, use a rotary cutter and mat to chop the strips. Be a part of the strips collectively utilizing a diagonal seam:
Becoming a member of the Binding Strips
1. Overlap the ends of the binding strips by about 45 levels. Be certain that the suitable sides of the material are dealing with one another.
2. Sew the strips collectively utilizing a scant 1/4″ seam allowance. Begin stitching about 1/4″ from the purpose of the overlap and stitch to the top of the strips.
3. Press the seam open. This can assist to cut back bulk within the completed binding.
4. Trim the surplus cloth from the seam allowance on the level of the overlap. This provides you with a pleasant, clear end.
| Step | Description |
|---|---|
| 1 | Overlap the ends of the binding strips by about 45 levels. |
| 2 | Sew the strips collectively utilizing a scant 1/4″ seam allowance. |
| 3 | Press the seam open. |
| 4 | Trim the surplus cloth from the seam allowance on the level of the overlap. |
Mitring Corners
Mitring corners offers knowledgeable contact to your quilt binding. This is an in depth information on the right way to do it:
- Measure and reduce the binding strip to the specified size for all sides of the quilt. For every nook, you will want two strips.
- Fold one finish of every strip over at a 45-degree angle to type a triangle. The size of the triangle ought to be equal to the width of the binding strip.
- Place the triangles collectively, aligning the sides and the corners. Sew alongside the diagonal edge to affix them, forming a “V” form.
- Press the seam open and fold the binding strip across the nook, aligning the uncooked edges of the binding with the uncooked edges of the quilt.
- To miter the opposite nook, observe steps 1-3. Then, align the triangles in order that the factors of the “V” shapes meet. Trim the surplus cloth on the prime and backside of the nook in order that the binding strip matches snugly across the nook.
Ending the Binding by Hand or Machine
As soon as the binding is sewn in place, it may be completed by hand or by machine. This is the right way to end it by hand:
Methodology 1: Ending the Binding by Hand
Step 1: Miter the Corners
Fold the binding over the nook of the quilt, mitering the sides to create a 45-degree angle. Trim any extra cloth.
Step 2: Blind Sew the Corners
Utilizing a needle and thread that matches the binding, sew the corners in place with small, blind stitches. Carry the needle via from the again of the quilt, catching a couple of threads from the within of the binding, after which insert it again into the material about 1/4 inch away. Repeat this course of till the nook is safe.
Step 3: Fold the Binding Over the Edges
Fold the binding over the uncooked edges of the quilt and topstitch it in place. Use a straight sew with an identical thread.
Step 4: Trim the Extra Binding
Trim any extra binding that extends past the sides of the quilt.
Methodology 2: Ending the Binding by Machine
Step 1: Set Stitching Machine
Set your stitching machine to a slender zigzag sew and choose a thread coloration that matches the binding.
Step 2: Topstitch the Binding
Align the binding with the uncooked edges of the quilt and topstitch it in place. Information the sting of the binding alongside the sting of the quilt as you sew.
Step 3: Trim the Binding
Trim any extra binding that extends past the sides of the quilt.
Confer with the desk for a abstract of the 2 strategies:
| Methodology | Steps |
|---|---|
| Hand Ending | Mitering corners, blind stitching corners, folding over edges, trimming extra binding |
| Machine Ending | Setting stitching machine, topstitching binding, trimming extra binding |
Troubleshooting Widespread Binding Points
Binding Is Too Free
- Use a narrower binding strip.
- Sew the binding nearer to the sting of the quilt.
- Use a smaller sew size.
Binding Is Too Tight
- Use a wider binding strip.
- Sew the binding farther from the sting of the quilt.
- Use a bigger sew size.
Binding Is Not Sq.
- Trim the quilt and backing squares to the identical measurement.
- Sew the binding evenly across the quilt.
- Miter the corners rigorously.
Binding Is Buckling
- Use bias binding.
Sort of Cloth Beneficial Bias Width Quilting cotton 2.25″ Flannel 2.5″ Silk 1.5″ - Stretch the binding as you sew it on.
- Press the binding after it’s sewn on.
Binding Is Not Laying Flat
- Use a strolling foot or even-feed foot when stitching on the binding.
- Modify the stress in your stitching machine.
- Trim the surplus seam allowance from the binding.
Binding Is Wrinkled
- Press the binding earlier than stitching it on.
- Use a light-weight contact when stitching on the binding.
- Stretch the binding gently as you sew it on.
Binding Is Coming Off
- Use a robust thread and needle.
- Sew the binding near the sting of the quilt.
- Backstitch firstly and finish of every seam.
Binding a Quilt with Bias Tape
Supplies You will Want:
- Bias tape
- Measuring tape
- Scissors
- Cloth glue
- Stitching machine
Step-by-Step Directions:
- Measure the perimeter of your quilt, including an additional 10-12 inches for overlap.
- Minimize a size of bias tape this size.
- Apply a skinny line of cloth glue to the fallacious facet of the bias tape.
- Fold the bias tape over the uncooked edges of the quilt, aligning the folded edge with the sting of the quilt.
- Press to set the glue.
- Prime sew the bias tape in place, roughly 1/8 inch from the sting of the quilt.
- Fold the bias tape to the again of the quilt.
- Trim the surplus bias tape, leaving a small overlap at the place to begin.
- Miter the corners by folding the bias tape at a 45-degree angle after which trimming the surplus. This can create a clear and professional-looking end.
| Step | Description |
|---|---|
| 1 | Measure and reduce the bias tape. |
| 2 | Apply cloth glue to the fallacious facet of the bias tape. |
| 3 | Fold the bias tape over the uncooked edges of the quilt. |
| 4 | Press to set the glue. |
| 5 | Prime sew the bias tape in place. |
| 6 | Fold the bias tape to the again of the quilt. |
| 7 | Trim the surplus bias tape. |
| 8 | Miter the corners. |
Learn how to Quilt Binding
Quilt binding is the ultimate step within the quilting course of, and it serves each a practical and ornamental function. It secures the uncooked edges of the quilt and prevents them from fraying, and it additionally provides a of entirety to the quilt’s total design. There are a lot of other ways to bind a quilt, however the commonest technique is to make use of a bias strip of cloth. Bias strips are reduce on a 45-degree angle to the grain of the material, which provides them a stretchy high quality that makes them best for binding curves.
To bind a quilt utilizing a bias strip, step one is to measure the perimeter of the quilt and reduce a bias strip of cloth that’s twice the size of the perimeter plus 6 inches. The bias strip ought to be 2 1/2 inches extensive. As soon as the bias strip is reduce, the following step is to fold it in half lengthwise and press it. Then, the bias strip is hooked up to the quilt by stitching it to the uncooked fringe of the quilt utilizing a blind sew. The blind sew is a sort of sew that’s sewn on the again of the quilt and is barely seen from the entrance. As soon as the bias strip is hooked up to the quilt, the uncooked edges of the quilt are trimmed and the binding is full.
Individuals Additionally Ask About Learn how to Quilt Binding
What’s the finest cloth to make use of for quilt binding?
The most effective cloth to make use of for quilt binding is a tightly woven cloth that isn’t too thick or too skinny. Some good decisions embody cotton, linen, and silk. Keep away from utilizing materials which might be stretchy or that fray simply.
How extensive ought to quilt binding be?
Quilt binding ought to be 2 1/2 inches extensive. This width will present sufficient protection to guard the uncooked edges of the quilt and so as to add an ornamental of entirety.
How do I connect quilt binding to a curved edge?
To connect quilt binding to a curved edge, you will have to make small pleats within the bias strip. This can permit the bias strip to curve across the fringe of the quilt with out puckering. To make a pleat, merely fold the bias strip over at a 45-degree angle and press it. Then, sew the pleat in place utilizing a blind sew.
How do I end the corners of quilt binding?
To complete the corners of quilt binding, you will have to miter the corners. This implies that you’ll want to chop the bias strip at a 45-degree angle after which fold it over in order that the 2 reduce edges meet. The mitered nook can then be stitched in place utilizing a blind sew.
