Featured picture: https://tse1.mm.bing.net/th?q=How To Mount A Trailer Hitch Receiver 2013 Chevy Silverado&w=250&h=250&c=7&rs=1&qlt=80&pid=1.7
**Easy methods to Mount a Trailer Hitch Receiver for a 2013 Chevy Silverado**
Mounting a trailer hitch receiver onto your 2013 Chevy Silverado is a must have for anybody who needs to tow a trailer, boat, or different massive merchandise. Whereas it could appear to be a frightening process, it is really comparatively easy and could be accomplished in just a few hours with the correct instruments and supplies. That can assist you get began, this information will present step-by-step directions on methods to mount a trailer hitch receiver in your 2013 Chevy Silverado.
**Supplies You will Want:**
Earlier than you start, you will want to collect the next supplies:
- 1-1/4 inch or 2-inch trailer hitch receiver
- Security chains
- Trailer hitch ball mount
- Tow ball
- Wrench
- Torque wrench
- Socket set
- Drill
- Stage
- Measuring tape
**Step-by-Step Directions:**
-
Security First: Earlier than you begin working, disconnect the unfavorable terminal in your Silverado’s battery. This may assist stop any electrical accidents.
-
Discover the Hitch Mounting Factors: Find the 4 mounting factors on the Silverado’s body. These will sometimes be positioned behind the bumper and could also be lined by a plastic cowl. Take away the covers if obligatory and guarantee all mounting factors are clear and freed from particles.
-
Set up the Hitch Receiver: Align the trailer hitch receiver with the mounting factors on the Silverado’s body. You could must raise the receiver barely to get it into place. Safe the receiver to the body utilizing the supplied bolts and washers. Tighten the bolts to the desired torque.
Collect the Obligatory Instruments and Supplies
Instruments Required:
- Ratchet or torque wrench
- Socket set (varied sizes)
- Wrench set (varied sizes)
- Pry bar or flat-head screwdriver
- Security glasses
Supplies Required:
- Hitch receiver
- Trailer hitch security chain hooks
- Locking hitch pin (non-compulsory)
- Anti-seize lubricant (non-compulsory)
Extra Suggestions:
- Assistant to assist maneuver the receiver
- Jack and jack stands (for security)
- Wheel chocks (for stability)
- Nitrile gloves (for cover)
Observe: It’s essential to fastidiously evaluate your automobile’s proprietor’s guide and seek the advice of a certified mechanic if you happen to encounter any difficulties or have considerations about performing the set up your self.
Find the Hitch Mounting Factors
Discovering the right hitch mounting factors in your 2013 Chevy Silverado is essential for a safe and profitable set up. To start, collect your instruments, together with a flashlight, socket wrench, and extension. Then, park your truck on a degree floor and interact the parking brake for security.
Subsequent, find the body rails underneath the rear of your Silverado. These rails are sometimes parallel to the axle and run lengthwise alongside the truck’s body. Use a flashlight to examine the body rails for pre-drilled holes or brackets that point out the hitch mounting factors. If you happen to do not see any apparent markings, seek the advice of your automobile’s proprietor’s guide or a good on-line useful resource.
After getting recognized the hitch mounting factors, clear the surfaces across the holes with a wire brush. This may take away any grime or particles that would intervene with the set up. Moreover, examine the body rails for any indicators of corrosion or harm. If you happen to discover any points, seek the advice of an expert mechanic earlier than continuing with the hitch set up.
Desk of Hitch Mounting Factors:
| Mannequin | Body Rail Places |
|---|---|
| Prolonged Cab (1500 and 2500) | 13.5 inches from the rear of the cab, 10 inches from the surface fringe of the body rail |
| Crew Cab (1500 and 2500) | 19 inches from the rear of the cab, 10 inches from the surface fringe of the body rail |
| Common Cab (3500) | 11.25 inches from the rear of the cab, 9.25 inches from the surface fringe of the body rail |
| Double Cab (3500) | 18.5 inches from the rear of the cab, 9.25 inches from the surface fringe of the body rail |
Put together the Hitch Receiver for Set up
Earlier than you may start the set up course of, it is important to arrange the hitch receiver. Listed here are the detailed steps to make sure correct preparation:
1. Learn the Set up Handbook Completely
Earlier than beginning any work, fastidiously learn by the producer’s set up guide. This may offer you particular directions and security tips tailor-made to your specific hitch receiver mannequin.
2. Verify the Hitch Receiver for Compatibility
Be certain that the hitch receiver you may have chosen is appropriate together with your Chevrolet Silverado. Think about the automobile’s 12 months, mannequin, and trim degree to make sure an ideal match.
3. Collect Obligatory Instruments and Supplies
Put together all the mandatory instruments and supplies you will have for the set up. This sometimes features a socket wrench set, torque wrench, penetrating lubricant, thread locker, and security glasses. Some particular instruments and supplies might fluctuate relying on the hitch receiver mannequin, so discuss with the producer’s guide for an entire checklist.
This is a desk summarizing the widespread instruments and supplies chances are you’ll want:
| Instruments | Supplies |
|---|---|
| Socket wrench set | Penetrating lubricant |
| Torque wrench | Thread locker |
| Security glasses |
Insert the Hitch Receiver into the Mounting Factors
1. Carry the hitch receiver into place. Have an assistant allow you to if potential, because the receiver could be heavy, particularly for bigger automobiles just like the Chevy Silverado.
2. Line up the mounting holes on the receiver with the corresponding holes on the body of your automobile. Use the bolts supplied with the hitch receiver equipment to safe the receiver to the body.
3. Tighten the bolts to the desired torque utilizing a torque wrench. Check with the hitch receiver equipment directions for the beneficial torque worth.
4. Double-check the tightness of all bolts and nuts. Use a torque wrench to make sure correct tightness. If any bolts or nuts are free, tighten them till they attain the desired torque.
5. Set up the protection chains and hitch pin. The security chains must be crossed and connected to the tow automobile’s body.
Step |
Motion |
|---|---|
| 1 | Carry the receiver into place. |
| 2 | Line up bolt holes and safe receiver. |
| 3 | Tighten bolts to specified torque. |
| 4 | Double-check bolt and nut tightness with a torque wrench. |
| 5 | Set up security chains and hitch pin. |
Safe the Hitch Receiver with Bolts
As soon as the hitch receiver is aligned with the body rails, it is time to safe it with the supplied bolts. Usually, there shall be 4-8 bolts included within the equipment.
Begin by threading the bolts by the holes within the hitch receiver and into the matching holes within the body rails. Hand-tighten the bolts as a lot as potential.
Subsequent, use a torque wrench to tighten the bolts to the desired torque listed within the hitch receiver’s set up directions. This can be a important step, because the bolts must be correctly tightened to make sure the hitch receiver is securely mounted.
As soon as all of the bolts are tightened, double-check to verify the hitch receiver is correctly aligned and safe. If obligatory, make any minor changes to the bolts or the hitch receiver to make sure it is within the appropriate place.
In some circumstances, the hitch receiver might require extra help or reinforcement, particularly if the automobile goes for use for heavy towing. If so, it is beneficial so as to add extra bolts or use a hitch stabilizer to make sure the hitch receiver stays securely mounted throughout use.
| Bolt Dimension | Torque |
|---|---|
| M12 | 100 ft-lbs |
| M14 | 120 ft-lbs |
Torque the Bolts to the Specified Tightness
As soon as the bolts are in place, they must be tightened to the desired torque. This may be sure that the hitch is securely connected to the body of the truck. The torque specification for the bolts shall be discovered within the directions that got here with the hitch. If you happen to shouldn’t have the directions, you could find the torque specification on-line or in a restore guide in your truck.
To torque the bolts, you will have a torque wrench. A torque wrench is a specialised software that measures the quantity of torque that’s being utilized to a bolt. To make use of a torque wrench, merely set the wrench to the specified torque specification after which tighten the bolt till the wrench clicks.
As soon as all the bolts are torqued to the desired tightness, the hitch shall be securely connected to the body of the truck. Now you can set up the ball mount and hitch ball, and you’ll be able to tow.
Bolt Torque Specs
| Bolt Dimension | Torque (ft-lbs) |
|---|---|
| M12 | 80-100 |
| M14 | 120-150 |
| M16 | 160-200 |
Set up the Security Chains and Pinch Pin
As soon as the hitch receiver is securely mounted, it is essential to connect the protection chains and pinch pin. These elements guarantee your trailer stays safely related to your automobile within the occasion of an sudden separation.
Security Chains
Check with the trailer guide for the particular directions on attaching the protection chains. Typically, you will must cross the chains underneath the trailer tongue and safe them to the hooks on the hitch receiver. Make sure the chains are taut and with none slack.
Pinch Pin
The pinch pin is a small metallic pin that matches by the holes within the hitch receiver and the trailer coupler. It prevents the trailer from unintentionally detaching from the automobile. To insert the pinch pin:
- Find the holes on the hitch receiver and trailer coupler that align.
- Maintain the pinch pin perpendicular to the holes.
- Align the holes and insert the pinch pin all over.
- Safe the pinch pin by inserting a cotter pin or R-clip by the holes on the tip of the pin.
| Part | Description |
|---|---|
| Security Chains | Connect to the trailer tongue and hitch receiver to stop unintentional trailer detachment. |
| Pinch Pin | Inserts by the hitch receiver and trailer coupler, stopping unintended separation. |
Check the Hitch Receiver’s Stability
Step 8: Examine the Hitch Mount’s Attachment Factors
As soon as the hitch receiver is mounted, it is essential to completely examine all of the attachment factors to make sure they’re tight and safe. Use a torque wrench to examine the tightness of all bolts and nuts. Check with the producer’s directions for the beneficial torque specs. If any bolts or nuts are free, tighten them to the right torque.
| Part | Torque Setting |
| Body-to-Hitch Bolts | 85-100 ft-lbs |
| Hitch Pin | 200-250 ft-lbs |
| Stabilizer Bolts | 50-75 ft-lbs |
Examine the welds across the attachment factors for any cracks or gaps. If you happen to discover any indicators of harm, it is best to hunt skilled help to deal with them earlier than utilizing the hitch receiver.
Preserve and Lubricate the Hitch Receiver
Common upkeep and lubrication will lengthen the lifetime of your trailer hitch receiver and stop untimely put on and corrosion. Comply with these steps to take care of your receiver correctly:
9. Lubricate the Receiver Usually
To make sure easy operation and stop untimely put on, it’s essential to lubricate the hitch receiver usually. Use a high-quality lubricant particularly designed for hitch receivers, equivalent to a silicone-based spray or grease. This is a step-by-step information to lubricate your receiver:
Lubrication Frequency:
The frequency of lubrication is determined by varied components, together with:
| Issue | Frequency |
|---|---|
| Regular Situations | Each 6-12 months |
| Heavy Use or Off-Roading | Each 3-6 months |
| Coastal or Winter Situations | Extra typically (each 1-3 months) |
Put together Your Instruments and Supplies
Collect the mandatory instruments, together with a socket wrench, torque wrench, wrench, degree, measuring tape, and security glasses. You will additionally want the trailer hitch receiver and new bolts.
Carry and Safe the Silverado
Park your Silverado on a degree floor, have interaction the parking brake, and place wheel chocks behind the rear wheels. Use a jack or ramps to raise the rear of the automobile and safe it with jack stands.
Take away Previous Tow Hooks
Find the 2 tow hooks on the Silverado’s body. Use the wrench to take away the bolts securing the tow hooks and set them apart.
Align and Mount Hitch Receiver
Place the trailer hitch receiver on the body the place the tow hooks had been. Modify it in order that the holes on the receiver align with the holes on the body.
Set up and Tighten Receiver Bolts
Insert the brand new bolts into the aligned holes. Use the socket wrench to hand-tighten the bolts as a lot as potential.
Torque Hitch Receiver Bolts
Use the torque wrench to tighten the receiver bolts to the desired torque in a star sample. This ensures even tightening and prevents harm.
Set up Hitch Pin and Clip
Insert the hitch pin by the receiver and safe it with the clip. This may stop the receiver from sliding out whereas towing.
Examine Hitch Meeting
Use the extent and measuring tape to confirm that the hitch receiver is aligned correctly and the balls on the receiver are on the appropriate peak in your trailer.
Extra Concerns for Particular Silverado Fashions
2013 Chevrolet Silverado Double Cab 1500
For this mannequin, chances are you’ll must take away the spare tire and service earlier than mounting the hitch receiver.
2013 Chevrolet Silverado Crew Cab 2500HD
The rear bumper on this mannequin might must be eliminated to entry the body mounting factors for the hitch receiver.
2013 Chevrolet Silverado Prolonged Cab 3500HD
This mannequin sometimes requires a custom-fit hitch receiver resulting from its distinctive body design. Seek the advice of with an expert installer or seek the advice of the automobile’s guide for particular directions.
How To Mount A Trailer Hitch Receiver 2013 Chevy Silverado
Mounting a trailer hitch receiver on a 2013 Chevy Silverado is a comparatively easy course of that may be accomplished in just a few hours with the correct instruments and supplies. This is a step-by-step information that can assist you get the job achieved:
- Collect your instruments and supplies. You will want a trailer hitch receiver, a set of wrenches, a torque wrench, a drill, and a set of drill bits.
- Put together the automobile. Park the Silverado on a degree floor and interact the parking brake. Disconnect the unfavorable battery terminal.
- Find the mounting factors. The mounting factors for the trailer hitch receiver are positioned on the body of the Silverado. They’re sometimes marked with small holes or dimples.
- Drill the mounting holes. Utilizing the drill and a set of drill bits, drill the mounting holes into the body of the Silverado. Make sure to use the right dimension drill bit for the bolts that shall be used to mount the receiver.
- Set up the trailer hitch receiver. Place the trailer hitch receiver over the mounting holes and safe it with the bolts. Tighten the bolts to the desired torque utilizing a torque wrench.
- Reattach the unfavorable battery terminal. Reconnect the unfavorable battery terminal and begin the Silverado. Verify to make it possible for the trailer hitch receiver is securely mounted.
Folks Additionally Ask About How To Mount A Trailer Hitch Receiver 2013 Chevy Silverado
What dimension trailer hitch receiver do I would like for a 2013 Chevy Silverado?
The dimensions of the trailer hitch receiver you want is determined by the burden of the trailer you’ll be towing. For many purposes, a Class III or Class IV trailer hitch receiver shall be ample.
The place can I discover the mounting factors for the trailer hitch receiver on a 2013 Chevy Silverado?
The mounting factors for the trailer hitch receiver are positioned on the body of the Silverado. They’re sometimes marked with small holes or dimples.
How do I tighten the bolts on the trailer hitch receiver to the right torque?
Use a torque wrench to tighten the bolts to the desired torque. The torque specs for the bolts could be discovered within the trailer hitch receiver’s set up directions.
How do I do know if the trailer hitch receiver is securely mounted?
After putting in the trailer hitch receiver, examine to make it possible for it’s securely mounted by shaking it vigorously. If the receiver strikes, tighten the bolts additional.
