For individuals who love spending time on the water, the Moken 10 Canoe is a superb choice. It is secure, sturdy, and straightforward to paddle. Nevertheless, in the event you ever must take away the motor out of your Moken 10 Canoe, it may be a little bit of a problem. That is why we have put collectively this information on the right way to take away the motor from a Moken 10 Canoe.
Step one is to take away the propeller. To do that, merely unscrew the propeller nut utilizing a wrench. As soon as the propeller is eliminated, you possibly can then take away the motor mount. The motor mount is held in place by two bolts. Take away these bolts and the motor mount will come off.
Subsequent, you want to disconnect {the electrical} wires from the motor. There are two electrical wires that hook up with the motor. Merely disconnect these wires and the motor shall be free. As soon as the motor is free, you possibly can then take away it from the canoe. To do that, merely raise the motor up and out of the canoe.
Eradicating the Outboard Motor Mount
To take away the outboard motor mount, you have to the next instruments:
- Socket wrench
- Field wrench
- Flathead screwdriver
- Phillips head screwdriver
- Pry bar
Listed here are the steps on the right way to take away the outboard motor mount:
- Disconnect the battery. It is a security precaution to stop any electrical shocks.
- Take away the bolts that maintain the motor to the mount. There are usually 4 bolts that maintain the motor to the mount. Use a socket wrench or field wrench to take away these bolts.
- Separate the motor from the mount. As soon as the bolts are eliminated, it is best to be capable of separate the motor from the mount. Use a pry bar to softly pry the motor away from the mount if essential.
- Clear the mounting floor. As soon as the motor is eliminated, you possibly can clear the mounting floor of the canoe. Use a flathead screwdriver or putty knife to scrape off any previous sealant or particles.
| Merchandise | Description |
|---|---|
| Socket wrench | Used to take away the bolts that maintain the motor to the mount. |
| Field wrench | Used to take away the bolts that maintain the motor to the mount. |
| Flathead screwdriver | Used to scrape off any previous sealant or particles from the mounting floor. |
| Phillips head screwdriver | Used to take away the screws that maintain the motor cowl in place. |
| Pry bar | Used to softly pry the motor away from the mount if essential. |
- Apply new sealant to the mounting floor. Use a marine-grade sealant to use a brand new bead of sealant to the mounting floor of the mount.
- Reattach the motor to the mount. Align the motor with the mounting floor and thoroughly raise it into place. Use a socket wrench or field wrench to tighten the bolts that maintain the motor to the mount.
- Reconnect the battery. As soon as the motor is securely mounted, you possibly can reconnect the battery.
Detaching the Motor Shaft
Detaching the motor shaft from the motor housing is a important step in eradicating the motor from the Moke 10 canoe. Observe these detailed directions to make sure a profitable and secure process:
1. Collect Instruments
* 10mm socket wrench
* 17mm socket wrench
* Ratchet
2. Disconnect Electrical Wires
* Find {the electrical} wires related to the motor shaft.
* Disconnect the wires rigorously by unplugging the connectors.
3. Take away Motor Mount Bolts
* Determine the bolts that safe the motor mount to the canoe.
* Use the 10mm socket wrench to take away these bolts.
4. Loosen Propeller Nut
* Use the 17mm socket wrench to loosen the propeller nut.
* Don’t take away the nut utterly at this stage.
5. Wiggle Motor Shaft
* Grip the motor shaft firmly and gently wiggle it forwards and backwards.
* Apply rising pressure till the shaft turns into unfastened from the housing.
* Be affected person, as this step might require some effort.
Warning:
* Keep away from pulling instantly on the motor shaft, as this might injury the motor housing.
* If the shaft is caught, use a mild rocking movement to free it up.
* As soon as the shaft is unfastened, raise the motor rigorously to take away it from the canoe.
Draining the Water from the Motor
Supplies You may Want:
- Wrench or socket set
- Funnel
- Container for the water
To empty the water from the motor, observe these steps:
1.
Disconnect the gas line from the motor.
2.
Take away the spark plug wires from the spark plugs.
3.
Flip the motor the wrong way up and place it on a degree floor.
4.
Find the drain plug on the underside of the motor.
5.
Place the container underneath the drain plug.
6.
Use the wrench or socket set to take away the drain plug.
7.
Permit the water to empty from the motor.
8.
As soon as all of the water has drained, change the drain plug and tighten it securely.
9.
Reconnect the gas line and spark plug wires.
10.
Flip the motor upright and examine for leaks.
Defending and Storing the Motor
To make sure the longevity and correct functioning of your Moken 10 Canoe motor, it is essential to take correct care in defending and storing it when not in use.
Defending the Motor
-
Rinse with Recent Water: After use, rinse the motor totally with contemporary water to take away salt, sand, and particles.
-
Dry the Motor: Use a clear, dry material to wipe down the motor, eradicating any remaining moisture.
-
Apply Corrosion Inhibitor: Spray a corrosion inhibitor, similar to WD-40, onto the motor’s steel elements to guard them from rust and corrosion.
-
Examine and Tighten Bolts: Verify all bolts and screws and tighten any which will have loosened throughout use.
Storing the Motor
When storing the motor, it is essential to decide on a dry, well-ventilated location to stop moisture buildup.
-
Take away the Battery: Disconnect the battery from the motor to stop it from draining.
-
Cowl the Motor: Place a protecting cowl over the motor to maintain it clear and dry.
Prolonged Storage (Greater than 30 Days)
For prolonged storage, extra steps are advisable:
| Step | Description |
|---|---|
| 1. Drain Engine Oil: Drain the engine oil from the motor and change it with a small quantity of fogging oil. | |
| 2. Fog the Engine: Take away the spark plug and spray fogging oil into the cylinder. | |
| 3. Change the Spark Plug: Reinstall the spark plug and retailer the motor in a dry, well-ventilated location. |
Reassembly and Testing
As soon as the motor is disassembled, it is time to reassemble it. Observe these steps rigorously to make sure correct reassembly:
1. Join the motor to the drive shaft.
Align the motor’s drive shaft with the drive shaft on the canoe. Safe the motor with the bolts offered.
2. Set up the propeller.
Place the propeller onto the motor’s drive shaft. Tighten the propeller nut securely.
3. Join {the electrical} wires.
Join the optimistic and damaging wires from the motor to the corresponding terminals on the battery. Guarantee a safe connection.
4. Mount the management panel.
Mount the management panel on the canoe in a handy location. Join the wires from the motor to the management panel.
5. Set up the battery.
Place the battery within the designated compartment on the canoe. Safe the battery with the straps or clips offered.
6. Take a look at the motor.
Earlier than taking the canoe out on the water, take a look at the motor by beginning it up and working it for a couple of minutes. Verify for any uncommon noises or vibrations.
7. Regulate the trim.
If the canoe just isn’t working straight, modify the motor’s trim by turning the trim tab till the canoe runs easily.
8. Lubricate the motor.
Apply a small quantity of lubricant to the motor’s bearings and gearcase to make sure clean operation.
9. Clear the motor.
After every use, clear the motor and propeller with contemporary water to take away any salt or grime buildup.
10. Retailer the motor correctly.
When not in use, retailer the motor in a dry, cool location. Disconnect the battery and defend the motor from mud and moisture.
| Activity | Instruments |
|---|---|
| Connecting motor to drive shaft | Bolts, wrench |
| Putting in propeller | Propeller nut, wrench |
| Connecting electrical wires | Screwdriver or wire crimper |
| Mounting management panel | Screws or bolts, wrench or screwdriver |
| Putting in battery | Battery straps or clips |
| Adjusting trim | Trim tab |
| Lubricating motor | Lubricant, brush |
| Cleansing motor | Recent water, sponge |
How To Take Motor Out Of Moken 10 Canoue
To take away the motor from a Moken 10 canoe, you have to the next instruments:
- A wrench
- A screwdriver
- A pair of pliers
After you have the required instruments, observe these steps:
- Disconnect the battery from the motor.
- Take away the bolts that maintain the motor to the canoe.
- Carry the motor out of the canoe.
You’ll want to retailer the motor in a dry place when not in use.
Folks Additionally Ask
How do I take away the trolling motor from my Moken 10 canoe?
To take away the trolling motor out of your Moken 10 canoe, you have to to observe the steps outlined above.
How do I change the motor on my Moken 10 canoe?
To interchange the motor in your Moken 10 canoe, you have to to observe the steps outlined above in reverse order.
What’s one of the best ways to retailer my Moken 10 canoe?
One of the best ways to retailer your Moken 10 canoe is in a dry place away from direct daylight.
How do I clear my Moken 10 canoe?
To wash your Moken 10 canoe, you should use a gentle cleaning soap and water answer. You’ll want to rinse the canoe totally after cleansing.
