After hours of cautious piecing and stitching, the second has lastly arrived to finish your treasured quilt. The ultimate step, binding the quilt, gives the proper completion and secures the layers collectively. Whereas this activity could seem daunting, it is truly fairly easy with a couple of easy-to-follow steps. This complete information will equip you with the information and strategies wanted to create a fantastic and sturdy binding that can improve the general aesthetic of your quilt.
Earlier than embarking on the binding course of, it is important to collect the required supplies. You will want a size of binding cloth that’s lower on the bias, which gives the material with further flexibility and permits it to curve simply across the quilt. Moreover, you may want a needle, thread, and a pair of scissors. After you have all of the supplies assembled, you may start the binding course of by attaching the binding to the quilt. This step entails stitching the binding to the quilt prime after which folding it over the uncooked edges and stitching it down. By following the directions rigorously, you may be sure that the binding is securely connected and gives a professional-looking end.
To finish the binding course of, you may want to hitch the 2 ends of the binding collectively. This may be achieved utilizing certainly one of a number of strategies, such because the mitered nook technique or the continual binding technique. The mitered nook technique creates a pointy, angled nook, whereas the continual binding technique produces a extra rounded nook. Each strategies are efficient in securing the binding and including a contact of class to your quilt. As soon as you’ve got joined the 2 ends of the binding, you may must hand-stitch the binding in place. This last step ensures that the binding is securely connected and gives a sturdy end that can stand up to years of use and delight.
Collect Mandatory Supplies
Earlier than you may start the method of ending the binding in your quilt, you’ll need to collect all the mandatory supplies. These embrace:
- Quilt
- Binding cloth
- Needle and thread
- Scissors
- Iron and ironing board
- Measuring tape
- Seam ripper
- Quilt batting (optionally available)
Binding Material
The binding cloth is the material that can be used to complete the perimeters of your quilt. It must be a light-weight cloth that’s simple to work with. You will have to buy sufficient binding cloth to go across the complete perimeter of your quilt, plus a couple of further inches for overlap.
When choosing a binding cloth, contemplate the general appear and feel of your quilt. You might need to select a cloth that enhances the colours and patterns in your quilt, or you could need to select a contrasting cloth so as to add a contact of curiosity.
Here’s a desk of prompt binding cloth widths for various quilt sizes:
| Quilt Measurement | Binding Material Width |
|---|---|
| Child | 2.5 inches |
| Throw | 3 inches |
| Twin | 3.5 inches |
| Full | 4 inches |
| Queen | 4.5 inches |
| King | 5 inches |
Decide Quilt Binding Size
To find out the size of binding wanted on your quilt, you may must measure the perimeter of the quilt prime. Here is a step-by-step information:
- Measure the width of the quilt prime. Measure the gap from one uncooked edge to the opposite, alongside the highest and backside.
- Measure the size of the quilt prime. Measure the gap from one uncooked edge to the opposite alongside the edges.
- Add the width and size measurements. This provides you the whole perimeter of the quilt prime.
- Multiply the whole perimeter by 1.5. This enables for material wraps and shrinkage.
- The result’s the size of binding you want. Spherical as much as the closest yard or half-yard for comfort.
Instance:
In case your quilt prime measures 50 inches broad and 60 inches lengthy, the calculations could be as follows:
| Measurement | Worth |
|---|---|
| Width of quilt prime | 50 inches |
| Size of quilt prime | 60 inches |
| Whole perimeter | 110 inches |
| Perimeter x 1.5 | 165 inches |
| Size of binding (rounded up) | 1.5 yards |
Pin Binding Strips Collectively
After you have lower your binding strips, it is time to pin them collectively. This can be a easy course of, nevertheless it’s essential to take your time and do it appropriately. In case your binding strips are usually not pinned collectively correctly, they won’t sew collectively easily and your quilt is not going to look its finest.
To pin your binding strips collectively, comply with these steps:
Step 1: Lay out your binding strips
Lay out your binding strips so as, with the correct sides collectively. Match up the ends of the strips rigorously, ensuring that they’re aligned.
Step 2: Pin the binding strips collectively
Pin the binding strips collectively alongside the lengthy edge, utilizing a 1/4-inch seam allowance. Begin by pinning the middle of the strips collectively, then work your approach out to the ends. Guarantee that the pins are perpendicular to the sting of the material, and that they aren’t too shut collectively or too far aside. It is best to have a pin each 2-3 inches.
Step 3: Press the seam
After you have pinned the binding strips collectively, press the seam allowance open utilizing a sizzling iron. This may assist the binding to put flat when it’s sewn on.
| Tip | Description |
|---|---|
| Use a light-weight contact when urgent the seam. | An excessive amount of warmth can harm the material. |
| Press the seam allowance open all the best way to the perimeters of the material. | This may assist the binding to put flat. |
Sew Binding Strips right into a Steady Loop
To create a steady loop of binding strips, comply with these detailed steps:
1. **Put together the Binding Strips:**
- Iron the binding strips flat.
- Be a part of the strips with a diagonal seam, urgent the seam open.
2. **Create the Steady Loop:**
- Fold the joined binding strips in half lengthwise, with the improper sides collectively.
- Sew alongside the folded edge utilizing a slender seam allowance of 1/4 inch to three/8 inch.
- Flip the tube proper facet out and press it flat.
3. **Verify for Continuity:**
- Pull gently on each ends of the binding loop to make sure it’s steady and there are not any breaks.
- If there are any breaks, rigorously sew the hole.
4. **Binding Traits:**
| Attribute | Description |
|---|---|
| Size | The binding loop must be barely longer than the perimeter of the quilt plus an additional 10-12 inches for overlap and becoming a member of. |
| Width | The width of the binding loop is dependent upon the specified completed look. The commonest widths are 2 1/4 inches, 2 1/2 inches, and a couple of 3/4 inches. |
| Material | The binding cloth ought to coordinate with the quilt however will also be a contrasting colour or sample. |
Connect Binding to Quilt
As soon as the binding strips have been sewn collectively, it is time to connect them to the quilt. Start by aligning the uncooked fringe of the binding to the uncooked fringe of the quilt prime, with the correct sides collectively. The binding ought to overlap the quilt prime by about 1/4 to 1/2 inch.
Sew across the perimeter of the quilt, utilizing a small sew size (about 2.5 to three mm). It is essential to maintain the seam allowance constant, so use a seam information or stitch-in-the-ditch foot that can assist you.
As soon as you’ve got sewn across the quilt, cease about 4 inches from the place you began. Overlap the tip of the binding by about 1 inch and stitch over the earlier seam. This may create a powerful and safe end.
Fold the binding over the uncooked fringe of the quilt again and press. Topstitch across the perimeter of the quilt, near the sting of the binding. This may safe the binding in place and provides the quilt a completed look.
Mitred Corners
For a extra professional-looking end, you may mitre the corners of the binding. To do that, fold the binding at a 45-degree angle on the nook of the quilt. Press the crease. Unfold the binding and align the uncooked edges of the 2 items. Sew throughout the nook, utilizing a small sew size. Trim the surplus binding and fold it over the uncooked fringe of the quilt, as described above.
| Methodology | Description |
|---|---|
| Straight Binding | The binding is connected to the quilt in a straight line, with none mitering. |
| Mitred Binding | The corners of the binding are mitered to create a extra professional-looking end. |
Machine Sew Round Perimeter
As soon as the binding is connected, it’s good to sew across the perimeter to safe it in place. Here is a step-by-step information:
1. Fold the Binding Over the Edge
Fold the binding over the uncooked fringe of the quilt, aligning the folded edge with the uncooked edge. Use a 1/4-inch seam allowance.
2. Pin the Binding
Pin the binding in place, beginning on the middle of 1 facet and dealing your approach across the quilt. Place the pins perpendicular to the sting, about 2 inches aside.
3. Sew Across the Perimeter
Utilizing a stitching machine, sew across the perimeter of the quilt, near the folded fringe of the binding. Use a small sew size (1.5-2 mm) for a safe sew.
4. Backstitch at Beginning and Ending Factors
If you attain the start line, backstitch a couple of stitches to safe the thread. Repeat on the ending level.
5. Take away the Pins
As soon as you’ve got stitched across the perimeter, take away the pins.
6. Trim the Extra Binding
Trim any extra binding on the corners to forestall bulk. To do that:
- Fold the binding again on itself at a 45-degree angle on the nook.
- Trim off the surplus binding, leaving about 1/4 inch of overlap.
- Unfold the binding and press it flat.
| Nook | Diagram |
|---|---|
| Inside Nook | [Diagram of an inside corner with binding trimmed and folded back] |
| Exterior Nook | [Diagram of an outside corner with binding trimmed and folded back] |
Hand Sew Hidden Hem
Hand stitching a hidden hem is a fragile and exact technique that requires endurance and a focus to element. To realize a professional-looking end, comply with these steps:
- Fold and Press the Hem: Flip the uncooked fringe of the binding inward by about 1/4 inch and press it flat. Then, fold the binding over the uncooked edge once more by one other 1/4 inch and press it firmly.
- Thread Your Needle: Thread a pointy needle with a quilter’s thread that matches the binding cloth. Double the thread and knot the ends.
- Begin Stitching: Insert the needle into the binding, simply to the correct of the folded edge. Deliver it out by way of the folded edge, about 1/16 inch above the primary sew.
- Invisible Stitches: Move the needle again by way of the folded edge about 1/16 inch to the left of the primary sew. Deliver it out by way of the binding, then insert it again into the binding 1/16 inch to the left of the second sew.
- Proceed Stitching: Repeat this sew sample alongside the complete hem, conserving the stitches even and invisible. The stitches ought to solely be seen from the again of the quilt.
- End the Hem: When you attain the tip of the hem, safe the thread by tying it off with a double knot. Clip any extra thread near the binding.
- Hand-Sew Chart: For a visible information, confer with the next chart:
Sew Quantity Needle In Needle Out 1 Proper of folded edge 1/16 inch above first sew 2 1/16 inch left of first sew 1/16 inch left of second sew 3 1/16 inch left of second sew 1/16 inch left of third sew
Sq. Corners for a Skilled End
Creating completely sq. corners when binding a quilt requires precision and a focus to element. Here is a step-by-step information to attain crisp, professional-looking outcomes:
1. Trim Corners
Trim the surplus batting and cloth from the quilt sandwich, leaving about 1/4 inch past the quilt edge.
2. Fold Binding Strips
Fold the binding strips in half lengthwise, urgent the crease firmly.
3. Pin Binding to the Quilt
Beginning at a straight edge, align the folded fringe of the binding strip with the quilt edge and safe it with pins. Go away a 10-12 inch tail and overlap the ends by 2-3 inches if you attain the start line.
4. Machine Sew Binding
Machine sew the binding in place, roughly 1/4 inch from the folded edge. Use an identical thread colour and sew in a straight line, pivoting on the corners.
5. Miter the Nook
As soon as you’ve got stitched to the primary nook, cease and raise the presser foot. Deliver the binding strip up and over the nook, and align the folded edge with the quilt edge. Proceed stitching.
6. Trim Extra
Trim the surplus binding cloth on the nook, leaving about 1/4 inch past the sew line.
7. Flip Nook
Fold the binding strip on the nook and press it flat. Use a pin to safe the folded edge to the quilt.
8. Ideas for Good Corners:
**a. Use a Template:** Think about using a 45-degree nook template to make sure accuracy when chopping and folding the mitered nook.
**b. Trim Again Extra:** After mitering the nook, trim away any extra binding cloth on the again of the quilt to scale back bulk.
**c. Endurance and Precision:** Take your time and give attention to creating exact corners. It is value the additional effort for a professional-looking end.
Safe Corners with Miter Folds
Miter folds create a clear and crisp nook in your quilt binding. To make a miter fold:
Step 1: Fold the Binding Over the Nook
Deliver the binding strip over the nook of the quilt, aligning the uncooked fringe of the binding with the uncooked fringe of the quilt.
Step 2: Mark the Fold Line
Fold the binding again over itself, making a crease parallel to the quilt edge. This crease will mark the fold line for the miter.
Step 3: Unfold the Binding Strip
Unfold the binding strip and fold it in half alongside the crease you simply made. The uncooked edge must be on the skin of the fold.
Step 4: Fold the Binding Over the Nook Once more
Deliver the mitered binding over the nook of the quilt once more, aligning the uncooked fringe of the binding with the quilt edge.
Step 5: Fold the Different Facet of the Binding Over
Fold the opposite facet of the binding over the nook, aligning the uncooked edge with the primary facet. The miter will now be enclosed within the binding.
Step 6: Pin the Binding
Pin the binding in place on the nook and alongside the quilt edge.
Step 7: Sew the Binding
Sew the binding down, beginning and stopping on the nook. To safe the miter, make a number of small stitches forwards and backwards throughout the nook.
Step 8: Repeat for Different Corners
Repeat the method for the remaining corners of the quilt.
Step 9: Be a part of the Binding Ends
| Methodology 1: Mitered Be a part of | Methodology 2: Straight Be a part of |
|---|---|
| – Lower each binding ends at 45-degree angles. – Overlap the ends and stitch collectively on the miter. – Press the seam open and trim the surplus. |
– Overlap the binding ends by 2-3 inches. – Fold underneath the uncooked edge of 1 finish and stitch it to the opposite finish. – Trim the surplus. |
Trim Extra Material for a Clear Look
As soon as the binding has been utilized, there can be extra cloth extending past the perimeters of the quilt. To realize a clear {and professional} end, this extra cloth must be trimmed rigorously.
To trim the surplus cloth, comply with these steps:
1.
Fold the binding over the uncooked fringe of the quilt and press it in place.
2.
Utilizing sharp scissors, trim the surplus cloth to inside 1/4 inch of the folded edge.
3.
Unfold the binding and press it flat.
4.
Fold the binding over the trimmed edge and press it in place.
5.
Topstitch the binding down near the sting, securing it in place.
6.
Repeat these steps across the complete perimeter of the quilt.
Here is a desk summarizing the steps:
| Step | Motion |
|---|---|
| 1 | Fold binding over quilt edge and press. |
| 2 | Trim extra cloth 1/4″ from folded edge. |
| 3 | Unfold binding and press flat. |
| 4 | Fold binding over trimmed edge and press. |
| 5 | Topstitch binding down close to edge. |
| 6 | Repeat course of round complete quilt. |
How one can Finish Binding on a Quilt
If you’re ending up a quilt, one of many final steps is to bind the perimeters. Binding not solely provides your quilt a completed look, nevertheless it additionally helps to guard the perimeters from fraying. As soon as you’ve got sewn the binding across the quilt, you may want to finish it off. Here is how:
- Deliver the 2 ends of the binding collectively, overlapping them by about 1 inch.
- Fold the overlapping edges underneath by about 1/2 inch.
- Pin the folded edges collectively.
- Sew the folded edges collectively utilizing a blind sew.
- Trim any extra binding.
You are completed!
Individuals Additionally Ask
How do you make a quilt binding?
To make quilt binding, you may want to chop strips of material which might be 2 1/2 inches broad. The size of the strips will differ relying on the scale of your quilt. As soon as you’ve got lower the strips, you may want to stitch them collectively to create an extended strip of binding. Then, you may must fold the binding in half and press it. Lastly, you may want to stitch the binding to the perimeters of your quilt.
What’s the finest cloth for quilt binding?
The most effective cloth for quilt binding is a medium-weight cotton cloth. Cotton is a sturdy cloth that’s simple to work with. It additionally is available in all kinds of colours and patterns, so you will discover the proper cloth to match your quilt.
How do you miter quilt binding?
Mitering quilt binding is a way that can be utilized to create a seamless end on the corners of your quilt. To miter quilt binding, you may want to chop the binding strips at a 45-degree angle. Then, you may want to stitch the binding strips collectively on the corners, utilizing a mitered seam. Lastly, you may must trim any extra binding.
