How To Program Liftmaster Keypad
Programming a Liftmaster keypad is an easy course of that may be accomplished in only a few minutes. First, you will want to collect your supplies. You have to the Liftmaster keypad, a ladder, and a Phillips screwdriver. After getting your supplies, you’ll be able to start the programming course of.
To start, you will want to take away the keypad from the wall. To do that, merely use the Phillips screwdriver to take away the 2 screws which can be holding the keypad in place. As soon as the screws are eliminated, you’ll be able to pull the keypad away from the wall. Subsequent, you will want to find the programming button on the again of the keypad. The programming button is normally a small, black button that’s situated close to the highest of the keypad. After getting situated the programming button, you’ll be able to start programming the keypad.
To program the keypad, you will want to enter a four-digit code. This code may be any quantity that you really want, however it is very important keep in mind the code that you simply enter. After getting entered the code, you will want to press the programming button. The keypad will then start to flash. As soon as the keypad has stopped flashing, the programming course of is full. Now you can reattach the keypad to the wall and start utilizing it.
Tips on how to Program Liftmaster Keypad
To program your Liftmaster keypad, you will want the next objects:
- Liftmaster keypad
- Screwdriver
- 9-volt battery
After getting gathered your supplies, observe these steps:
- Take away the duvet of the keypad by unscrewing the 2 screws that maintain it in place.
- Find the “be taught” button on the again of the keypad. This button is normally purple or yellow.
- Press and maintain the “be taught” button for 5 seconds. The LED on the keypad will begin to flash.
- Inside 30 seconds, press the button on the distant management that you simply need to program the keypad to. The LED on the keypad will cease flashing and switch strong.
- Repeat steps 4 and 5 for every further distant management that you simply need to program the keypad to.
- Change the duvet of the keypad and tighten the screws.
Your Liftmaster keypad is now programmed. Now you can use the keypad to open and shut your storage door.
Folks Additionally Ask About Tips on how to Program Liftmaster Keypad
How do I reset my Liftmaster keypad?
To reset your Liftmaster keypad, observe these steps:
- Take away the duvet of the keypad by unscrewing the 2 screws that maintain it in place.
- Find the reset button on the again of the keypad. This button is normally purple or yellow.
- Press and maintain the reset button for 5 seconds. The LED on the keypad will begin to flash.
- Launch the reset button. The keypad will now be reset.
- Change the duvet of the keypad and tighten the screws.
How do I alter the code on my Liftmaster keypad?
To alter the code in your Liftmaster keypad, observe these steps:
- Enter your present code into the keypad.
- Press the “#” key.
- Enter your new code into the keypad.
- Press the “#” key once more.
- The keypad will now be reprogrammed along with your new code.
How do I troubleshoot my Liftmaster keypad?
In case you are having bother along with your Liftmaster keypad, strive the next troubleshooting ideas:
- Be sure that the batteries are recent.
- Verify the wiring connections on the again of the keypad.
- Be sure that the keypad is correctly programmed.
- In case you have tried the entire above troubleshooting ideas and your keypad continues to be not working, you could want to switch it.
