If you wish to relocate your Google Doorbell or substitute it with a brand new one, unmount it from the wall. The method may be very easy and easy, and in just some minutes, you will have the machine in your palms. This is a step-by-step information to take away your Google Doorbell:
First, it is advisable energy off the doorbell by eradicating it from its mounting plate. Press the doorbell button to activate the machine. As soon as the sunshine on the doorbell begins glowing, press and maintain the small button on the underside of the machine for about 10 seconds till the sunshine turns off. Now, the doorbell is powered off, and you’ll safely take away it from the wall. To do that, insert your fingernail or a small flat-head screwdriver into the small slot on the backside of the doorbell and gently pry it off the plate.
After eradicating the doorbell, disconnect the wires from the machine. There are two small screws on the again of the doorbell that safe the wires. Use a screwdriver to loosen the screws after which pull the wires out of the terminals. As soon as the wires are disconnected, you’ll be able to discard the doorbell. If you’re changing the doorbell with a brand new one, observe the directions that got here with the brand new machine to put in it.
The best way to Take away a Google Doorbell
Eradicating a Google Doorbell is a comparatively easy course of that may be accomplished in a couple of minutes. Listed below are the steps on find out how to take away a Google Doorbell:
- Flip off the ability to the doorbell. This may be finished by flipping the breaker that powers the doorbell or by eradicating the fuse that powers the doorbell.
- Take away the faceplate of the doorbell. This may be finished by unscrewing the screws that maintain the faceplate in place.
- Disconnect the wires from the doorbell. There shall be two wires linked to the doorbell, one for energy and one for floor. Disconnect the wires by unscrewing the screws that maintain the wires in place.
- Take away the doorbell from the wall. The doorbell shall be held in place by two screws. Take away the screws and pull the doorbell away from the wall.
The best way to Take away a Google Doorbell with out Turning Off the Energy
If you do not need to show off the ability to the doorbell, you’ll be able to take away it with out turning off the ability by following these steps:
- Use a non-conductive device. When working with electrical energy, you will need to use a non-conductive device to keep away from getting shocked. A non-conductive device is made from a cloth that doesn’t conduct electrical energy, akin to plastic or rubber.
- Disconnect the wires from the doorbell. There shall be two wires linked to the doorbell, one for energy and one for floor. Disconnect the wires by unscrewing the screws that maintain the wires in place.
- Take away the doorbell from the wall. The doorbell shall be held in place by two screws. Take away the screws and pull the doorbell away from the wall.
Individuals Additionally Ask
How do I reset my Google Doorbell?
To reset your Google Doorbell, press and maintain the reset button on the again of the doorbell for 10 seconds. The doorbell will then reboot and be reset to manufacturing facility settings.
How do I modify the battery in my Google Doorbell?
To alter the battery in your Google Doorbell, take away the faceplate of the doorbell and find the battery compartment. Open the battery compartment and substitute the previous battery with a brand new one. Shut the battery compartment and reattach the faceplate to the doorbell.
How do I troubleshoot my Google Doorbell?
If you’re having hassle along with your Google Doorbell, you’ll be able to troubleshoot the issue by following these steps:
- Examine the ability to the doorbell.
- Examine the wiring to the doorbell.
- Reset the doorbell.
- Contact Google help.
