The Honda Silverwing is a maxi-scooter that was first launched in 2001. It has been praised for its consolation, efficiency, and gasoline effectivity. Nevertheless, one frequent grievance concerning the Silverwing is that it may be tough to entry the gasoline pump. This could be a downside if the gasoline pump must be changed or repaired.
On this article, we’ll present you the best way to get to the gasoline pump on a Honda Silverwing. We’ll present step-by-step directions and images that can assist you full the duty. We may even present some tips about the best way to keep away from frequent errors.
Earlier than you start, you will need to collect the instruments and supplies that you’ll want. You have to a socket wrench, a Phillips screwdriver, and a flat-blade screwdriver. Additionally, you will want a brand new gasoline pump, if you’re changing the previous one. After you have gathered the mandatory instruments and supplies, you’ll be able to start the method of eradicating the gasoline pump.
Figuring out the Location of the Gas Pump
The gasoline pump in a Honda Silverwing is a vital part that gives the engine with a steady provide of gasoline. It’s positioned contained in the gasoline tank and is submerged within the gasoline, which helps to maintain it cool and lubricated. To entry the gasoline pump, you have to to take away the gasoline tank from the bike.
Listed here are the steps on the best way to get to the gasoline pump:
| Step | Description |
|---|---|
| 1 | Take away the seat. |
| 2 | Disconnect the gasoline line from the gasoline pump. |
| 3 | Take away the bolts that maintain the gasoline pump in place. |
| 4 | Pull the gasoline pump out of the gasoline tank. |
After you have eliminated the gasoline pump, you’ll be able to examine it for any injury or put on. If the gasoline pump is broken, it would have to be changed.
Making ready for Gas Pump Entry
Earlier than you’ll be able to entry the gasoline pump, you will must take a number of preparatory steps. These steps will aid you to securely and efficiently full the restore.
Collect your instruments and supplies
You have to the next instruments and supplies to finish this restore:
- Socket wrench set
- Screwdriver set
- Gas line pliers
- Gas filter
- Gas pump
- Gasoline
Security issues
When working in your automobile’s gasoline system, you will need to take security precautions to keep away from severe damage or injury. The next security issues must be noticed:
- Work in a well-ventilated space.
- Don’t smoke or use open flames close to the automobile.
- Put on security glasses and gloves.
- Disconnect the detrimental battery terminal earlier than beginning work.
- Relieve gasoline system strain earlier than disconnecting any gasoline strains.
Find the gasoline pump
The gasoline pump is positioned within the gasoline tank. To entry the gasoline pump, you have to to take away the gasoline tank from the automobile. The gasoline tank is often positioned beneath the rear of the automobile. After you have eliminated the gasoline tank, it is possible for you to to entry the gasoline pump.
Eradicating the Seat and Fairings
To entry the gasoline pump, you will must take away the seat and fairings. This is how:
1. Take away the Seat
Find the seat launch lever beneath the rear of the seat. Pull the lever in the direction of you and elevate the seat off the bike.
2. Take away the Left Fairing
Find the fasteners holding the left fairing in place. Usually, you will discover two screws on the entrance, two on the again, and one or two alongside the aspect. Take away all of the fasteners and thoroughly pull the fairing away from the bike.
3. Take away the Proper Fairing
Repeat steps for eradicating the left fairing for the appropriate aspect, listening to detaching any extra wires or elements that could be related to the appropriate fairing, such because the flip sign connector, the gasoline line connector, or the exhaust pipe hanger.
| Part | Location | Elimination Kind |
|---|---|---|
| Flip Sign Connector | Behind the fairing | Disconnect wire |
| Gas Line Connector | Close to the gasoline tank | Loosen clamp and detach |
| Exhaust Pipe Hanger | Backside of the fairing | Unbolt hanger |
Disconnecting Electrical Parts
Earlier than disconnecting any electrical elements, you will need to disconnect the detrimental battery terminal to forestall electrical shocks or injury to the system. Listed here are the steps concerned in disconnecting {the electrical} elements:
1. Find the Gas Pump Electrical Connector
The gasoline pump electrical connector is often positioned close to the gasoline tank or gasoline pump. It’s a giant, waterproof connector with a number of wires working to it.
2. Disconnect the Gas Pump Electrical Connector
To disconnect the gasoline pump electrical connector, merely press on the discharge tab and pull the connector aside. Don’t pull on the wires, as this may injury them.
3. Disconnect the Gas Pump Floor Wire (Optionally available)
In some instances, there could also be a separate floor wire related to the gasoline pump. If there’s a floor wire, disconnect it by loosening the bolt or nut that secures it.
4. Detaching the Gas Pump Meeting from the Gas Tank
As soon as {the electrical} elements are disconnected, you’ll be able to detach the gasoline pump meeting from the gasoline tank. This will likely require eradicating bolts, nuts, or clips that safe the meeting to the tank.
To supply additional steerage on detaching the gasoline pump meeting from the gasoline tank, think about the next desk:
| Car Mannequin | Detachment Directions |
|---|---|
| Honda Silverwing 600 (2002-2008) | Take away the 4 bolts that safe the gasoline pump meeting to the gasoline tank. Gently elevate the meeting straight as much as detach it. |
| Honda Silverwing 400 (2009-2018) | Disconnect the quick-release gasoline line connectors. Take away the 2 bolts that safe the gasoline pump meeting to the gasoline tank. Rigorously elevate the meeting straight as much as detach it. |
Draining Gas from the Gas Line
As soon as the gasoline line is disconnected from the gasoline pump, you’ll be able to proceed to empty the gasoline from the road. That is performed to forestall gasoline from spilling or leaking out throughout the set up of the brand new gasoline pump.
To empty the gasoline from the gasoline line, comply with these steps:
- Place an appropriate container beneath the gasoline line.
- Open the gasoline line by both disconnecting the quick-disconnect connector or loosening the gasoline line clamp.
- Permit the gasoline to empty into the container.
- As soon as the gasoline has stopped flowing, reconnect the gasoline line or tighten the gasoline line clamp.
- Dispose or recycle the gasoline drained from the gasoline line in response to your native rules.
Desk: Gas Disposal
| Methodology | Directions |
|---|---|
| Get rid of gasoline at a waste assortment middle | Contact your native waste administration authority for directions on the best way to eliminate gasoline safely and legally. |
| Recycle gasoline | Find a recycling middle that accepts gasoline. Examine on-line or together with your native authorities for choices. |
| Use gasoline for different functions (e.g., cleansing elements) | Filter the gasoline by a fine-mesh filter to take away any impurities. Use the filtered gasoline for cleansing or different non-automotive functions. |
Eradicating the Gas Tank
Earlier than accessing the gasoline pump, it’s good to take away the gasoline tank. This is how:
- Place the scooter on a secure floor and interact the parking brake.
- Take away the seat by lifting it and unhooking the latch.
- Find the gasoline line and disconnect it from the tank by urgent the discharge clip.
- Disconnect {the electrical} connector for the gasoline degree sensor.
- Unbolt the bolts securing the gasoline tank to the body.
- Rigorously elevate the gasoline tank and place it apart.
Notice:
Take precautions when dealing with gasoline as it’s flammable. Guarantee good air flow and keep away from smoking or utilizing open flames close to the work space.
| Instruments Required | Description |
|---|---|
| Socket Wrench | For eradicating bolts securing the gasoline tank |
| Phillips Screwdriver | For disconnecting {the electrical} connector |
| Gas Line Disconnect Device | For releasing the gasoline line clip |
Accessing the Gas Pump Module
**1. Take away the seat.**
**2. Take away the battery.**
**3. Take away the battery field.**
**4. Take away the air cleaner field.**
**5. Take away the gasoline tank.**
**6. Take away the gasoline pump cowl.**
**7. Disconnect the gasoline strains and electrical connector.**
To disconnect the gasoline strains, use a pair of pliers to squeeze the discharge tabs on the gasoline line connectors and pull the gasoline strains off the gasoline pump. To disconnect {the electrical} connector, use a small screwdriver to launch the lock tab on the connector and pull the connector off the gasoline pump.
**8. Take away the gasoline pump.**
The gasoline pump is held in place by two screws. Take away the screws and elevate the gasoline pump out of the gasoline tank.
**9. Examine the gasoline pump and change it if obligatory.**
Examine the gasoline pump for any injury or put on. If the gasoline pump is broken or worn, it have to be changed.
**10. Reinstall the gasoline pump.**
To reinstall the gasoline pump, reverse the steps within the elimination process. Make sure to tighten the screws that maintain the gasoline pump in place.
**11. Reinstall the gasoline tank.**
**12. Reinstall the air cleaner field.**
**13. Reinstall the battery field.**
**14. Reinstall the battery.**
**15. Reinstall the seat.**
Learn how to Get to the Gas Pump
In case your Honda Silverwing is experiencing fuel-related points, it’s possible you’ll want to exchange the gasoline pump. This is a step-by-step information on the best way to get to the gasoline pump:
1. Security First
Earlier than you start, make sure the Silverwing is parked on a degree floor, the engine is off, and the ignition key’s eliminated.
2. Take away the Seat
Find the seat lock, usually positioned on the entrance or rear of the seat. Insert the important thing and switch it to launch the seat. Raise the seat off the Silverwing.
3. Disconnect the Battery
Use a wrench to loosen the detrimental battery terminal and disconnect the battery.
4. Take away the Gas Tank
Find the gasoline tank bolts, often discovered on the perimeters of the tank. Take away the bolts and thoroughly elevate the gasoline tank off the body.
5. Take away the Gas Pump Cowl
Discover the gasoline pump cowl, usually secured by bolts or screws. Take away the quilt to show the gasoline pump.
6. Disconnect the Gas Strains
Rigorously disconnect the gasoline strains related to the gasoline pump. Use a gasoline line elimination device for security.
7. Take away the Gas Pump
Find the gasoline pump bolts or screws. Take away them and gently pull the gasoline pump out of the meeting.
8. Examine and Exchange the Gas Pump
Examine the gasoline pump for injury or put on. If obligatory, change the gasoline pump with a brand new one. Guarantee the right fitment and safe it with the bolts or screws.
| Half | Torque |
|---|---|
| Gas Pump Bolts | 8-10 Nm |
9. Reconnect
Join the gasoline strains to the brand new gasoline pump. Reinstall the gasoline pump cowl and gasoline tank.
10. Reconnect the Battery
Reconnect the detrimental battery terminal and tighten it securely.
11. Set up the Seat
Place the seat on the Silverwing and interact the seat lock.
12. Begin the Engine
Insert the ignition key and begin the engine. Examine for any gasoline leaks and make sure the engine runs easily.
Reinstalling Parts in Reverse Order
9. Reinstall the Gas Pump and Filter
a. Align the gasoline pump with the gasoline tank and thoroughly insert it into the opening.
b. Safe the gasoline pump utilizing the mounting bolts and tighten them to the required torque.
c. Slide the gasoline filter onto the gasoline pump outlet and safe it with the clamp.
d. Reconnect the gasoline line to the gasoline pump and tighten the clamp.
e. Join {the electrical} connector to the gasoline pump.
f. Set up the gasoline pump cowl and safe it with the bolts.
10. Reinstall the Filler Cap
a. Exchange the filler cap and tighten it securely.
11. Reinstall the Battery
a. Join the constructive battery terminal first after which the detrimental terminal.
b. Tighten the battery terminals to the required torque.
12. Reinstall the Seat
a. Align the seat with the body and slide it into place.
b. Safe the seat with the seat bolt.
13. Examine for Leaks
a. Begin the engine and let it idle.
b. Examine for any gasoline leaks from the gasoline pump, gasoline filter, or gasoline line.
c. If any leaks are discovered, tighten the connections or change the broken elements.
Priming the Gas System
After changing your gasoline pump, it’s good to prime the gasoline system to make sure that there may be gasoline flowing to the engine. Listed here are the steps concerned in priming the gasoline system:
When you have any leaks or if the engine doesn’t begin after priming, it’s possible you’ll must repeat these steps or seek the advice of with knowledgeable mechanic.
How To Get To The Gas Pump On A Honda Silverwing
The gasoline pump on a Honda Silverwing is positioned within the gasoline tank. To entry the gasoline pump, you have to to take away the gasoline tank from the bike.
To take away the gasoline tank, comply with these steps:
- Flip off the gasoline petcock.
- Disconnect the gasoline line from the gasoline tank.
- Take away the bolts that safe the gasoline tank to the body.
- Rigorously elevate the gasoline tank off of the bike.
As soon as the gasoline tank is eliminated, you have to to take away the gasoline pump from the gasoline tank. To take away the gasoline pump, comply with these steps:
- Disconnect {the electrical} connector from the gasoline pump.
- Take away the bolts that safe the gasoline pump to the gasoline tank.
- Rigorously elevate the gasoline pump out of the gasoline tank.
As soon as the gasoline pump is eliminated, you’ll be able to change it with a brand new gasoline pump. To put in a brand new gasoline pump, comply with these steps:
- Insert the brand new gasoline pump into the gasoline tank.
- Safe the gasoline pump to the gasoline tank with the bolts.
- Join {the electrical} connector to the gasoline pump.
- Reinstall the gasoline tank on the bike.
- Join the gasoline line to the gasoline tank.
- Activate the gasoline petcock.
Individuals Additionally Ask About Honda Silverwing How To Get To The Gas Pump
What are the signs of a nasty gasoline pump on a Honda Silverwing?
The signs of a nasty gasoline pump on a Honda Silverwing can embrace:
- Issue beginning the bike
- Engine stalling
- Lack of energy
- Decreased fuel mileage
How a lot does it price to exchange a gasoline pump on a Honda Silverwing?
The fee to exchange a gasoline pump on a Honda Silverwing can range relying on the yr and mannequin of the bike. The typical price to exchange a gasoline pump on a Honda Silverwing is between $200 and $400.
How lengthy does it take to exchange a gasoline pump on a Honda Silverwing?
It takes about 1-2 hours to exchange a gasoline pump on a Honda Silverwing.
