Embark on a complete journey of unlocking the inside workings of your PlayStation 5 controller. Whether or not it is to interchange worn-out elements, improve its performance, or just fulfill your curiosity, this detailed information will empower you with the data and expertise essential to open the PS5 controller with ease.
Earlier than embarking on this process, it is paramount to collect the mandatory instruments. Procure a small Phillips #0 screwdriver and a plastic spudger or pry instrument. Moreover, guarantee that you’ve ample lighting and a snug workspace. Bear in mind, opening the PS5 controller can void your guarantee, so proceed with warning and comply with the directions meticulously.
With the suitable preparation in place, it is time to delve into the disassembly course of. Fastidiously flip the controller over and find the 4 screws securing the again plate. Make use of your Phillips #0 screwdriver to take away these screws and set them apart in a secure place. As soon as the screws are eliminated, gently pry aside the again plate utilizing the plastic spudger, taking care to not harm the fragile elements inside. As you elevate the again plate, disconnect the battery ribbon cable by fastidiously prying it up with the spudger. And there you’ve gotten it, the inside workings of your PS5 controller lie earlier than you, prepared for exploration and customization.
Step-by-Step Information to Opening a PS5 Controller
1. Security Precautions and Instruments
Earlier than embarking on the journey of disassembling your PS5 controller, it’s crucial to prioritize security and guarantee you’ve gotten the mandatory instruments for the duty. Security first! Energy down and unplug your controller to keep away from any electrical hazards. Shield your work floor with a mushy fabric or anti-static mat to forestall scratches or harm to the controller.
Important instruments for the job:
| Software | Objective |
|---|---|
| Philips #00 Screwdriver | Eradicating screws |
| Plastic Spudger or Pry Bar | Separating elements |
| Anti-Static Wrist Strap (Non-compulsory) | Defending towards electrostatic discharge |
2. Eradicating the Faceplate
With the security precautions in place and instruments on the prepared, it is time to embark on the disassembly course of. Start by fastidiously flipping the controller over, revealing the underside cowl. Find and unscrew the 5 Philips screws securing the faceplate to the controller housing. These screws are sometimes hid beneath rubber pads, so gently pry them off to entry the screws.
3. Separating the Controller
As soon as the screws are eliminated, the faceplate might be lifted away from the controller. Use a plastic spudger or pry bar to softly pry alongside the sides to separate the 2 halves. Be affected person and keep away from utilizing extreme power to forestall harm.
4. Disconnecting the Battery
With the controller separated, disconnect the battery by fastidiously unplugging the connector. It will forestall any residual cost from interfering together with your work.
5. Eradicating the Motherboards
Find the 4 screws securing the primary motherboard to the controller housing and take away them. The motherboard can then be lifted away, exposing the sub-motherboard beneath. Disconnect the ribbon cable connecting the 2 motherboards.
6. Eradicating the Buttons and Triggers
To entry the buttons and triggers, you will have to take away the set off springs. Find the small indentations on the triggers and use a plastic spudger to softly pry the springs up. As soon as the springs are eliminated, the triggers might be lifted away from the controller. The buttons might be eliminated in the same method by prying them out utilizing a plastic spudger.
7. Reassembly
As soon as all of the elements have been eliminated, reassembly is just a matter of reversing the disassembly steps. You’ll want to reconnect all connectors and align elements correctly earlier than securing them with screws.
Security Precautions Earlier than Opening
Earlier than embarking on the method of opening your PS5 controller, it’s essential to prioritize security. Listed below are some important precautions to comply with:
Disconnect the Controller
Make sure that the controller is disconnected from any energy supply or gaming console. It will forestall potential electrical hazards throughout the disassembly course of.
Collect Needed Instruments
Purchase an appropriate set of small screwdrivers particularly designed for electronics. Keep away from utilizing overly giant or inappropriate instruments, as they may harm the controller’s delicate elements.
Anti-Static Measures
To guard the controller from electrostatic discharge (ESD), think about using an anti-static wrist strap. Alternatively, you possibly can discharge any static electrical energy by touching a grounded metallic object earlier than dealing with the controller.
Clear Work Space
Put together a clear and well-lit workspace to attenuate contamination and make the restore course of extra environment friendly. A mushy, non-abrasive floor is good for putting the controller throughout disassembly.
Warning Throughout Dealing with
Deal with the controller and its elements with utmost care. Keep away from touching delicate circuitry or connectors, as mishandling may cause harm.
Take Your Time
Strategy the disassembly course of with endurance and keep away from dashing. Take note of the position of screws and elements to facilitate reassembly in a while.
Eradicating the Faceplate
Unveiling the inside workings of your PS5 controller begins with eradicating the faceplate. Observe these steps with care to keep away from harm:
- Flip the controller the wrong way up, revealing the underside edge.
- Use a small, flathead screwdriver or a plastic pry instrument (like a guitar decide) to fastidiously insert into the small slot close to the L2 and R2 shoulder buttons.
- Gently pry the faceplate up, ranging from the underside edge. Keep away from extreme power to forestall breaking the clips.
-
Separating the Entrance and Again Plates
After efficiently eradicating the faceplate, you may encounter a skinny ribbon cable connecting the back and front plates. Deal with this cable with excessive warning to keep away from any harm:
- Determine the ribbon cable connector positioned close to the highest of the controller. It ought to have a small black lever.
- Utilizing a pair of tweezers or your fingernails, gently elevate the lever and disconnect the ribbon cable.
- Be affected person and take your time to keep away from tearing the cable.
- Proceed prying the faceplate aside, fastidiously separating the back and front plates.
- Lay the again plate apart and set the faceplate apart for reassembly later.
Disconnecting the Battery
Disconnecting the battery is an important step to keep away from any electrical accidents or harm to the controller. Observe these detailed directions to make sure a secure and correct process:
- Find the small screw below the L2 set off button.
- Utilizing a Philips #00 screwdriver, unscrew and take away the screw.
Step 3 Description Grasp the battery gently and pull it barely towards you. The battery ought to disconnect easily from the connector. **Observe:** Be cautious to not apply extreme power when pulling the battery, as it could harm the connector or the battery itself.
- Examine the battery and the connector for any seen harm.
- If obligatory, clear the connector with a lint-free fabric or cotton swab dipped in isopropyl alcohol.
Eradicating the Backside Screws
The subsequent step is to take away the 4 backside screws that maintain the controller collectively. These screws are positioned on the underside of the controller, two on all sides. You’ll need a Phillips #00 screwdriver to take away these screws.
Detailed Directions:
- Find the 4 backside screws: Flip the controller over and face the underside. The 4 screws are positioned within the middle of the controller, two on all sides.
- Use the proper screwdriver: Insert a Phillips #00 screwdriver into the primary screw.
- Flip counterclockwise: Slowly flip the screwdriver counterclockwise to loosen the screw. Don’t overtighten or strip the screw.
- Take away the screw: As soon as the screw is unfastened, fastidiously take away it utilizing the screwdriver.
- Repeat for the opposite three screws: Repeat steps 2-4 for the remaining three screws.
- Put aside the screws: Place the screws in a secure place to keep away from shedding them throughout reassembly.
Screw Dimension Amount Phillips #00 4 Opening the Controller Shell
To open the PS5 controller shell, you may want a Philips #00 screwdriver and a plastic spudger or pry instrument. Observe these steps fastidiously:
- Take away the 4 screws: On the again of the controller, behind the handgrips, you may see 4 Philips #00 screws. Unscrew and set them apart.
- Pry open the shell: Use the plastic spudger to softly pry open the shell alongside the seam. Begin on the prime and work your means round.
- Disconnect the battery: As soon as the shell is open, you may see the battery linked to the motherboard by a purple and black wire. Unplug the battery by pulling the connector straight up.
- Take away the motherboard: Holding the motherboard by the edges, fastidiously elevate it up and out of the shell.
- Disconnect the buttons: Now you may must disconnect the buttons from the motherboard. Use the spudger to softly pry up the connectors for every button.
- Take away the analog sticks: Pull out the analog sticks from the motherboard. They might be held in place by a small screw, so unscrew it if obligatory.
- Detach the triggers:
Set off Detachment Steps R2/L2 Pull the set off in the direction of you till it unhooks from the motherboard.
Find the small spring contained in the set off and take away it.
R1/L1 Flip the motherboard over and discover the R1/L1 triggers.
Use the spudger to softly pry the triggers away from the motherboard.
Disassembling the Inner Elements
After you have efficiently eliminated the again casing, you possibly can proceed with disassembling the inner elements of the controller. Earlier than doing so, guarantee that you’ve a transparent and arranged workspace to forestall any loss or misplacement of elements.
Here’s a detailed breakdown of the steps concerned in disassembling the inner elements:
- Eradicating the Battery: Find the battery, which is a rectangular-shaped part secured by a screw. Unscrew the screw and punctiliously disconnect the battery from the controller.
- Detaching the Haptic Suggestions Motors: Determine the 2 haptic suggestions motors, that are positioned on both aspect of the battery. Disconnect the motors by fastidiously unplugging their connectors.
- Unscrewing the Motherboard: Find the seven screws holding the motherboard in place. Fastidiously unscrew these screws and gently elevate the motherboard to detach it from the controller.
- Separating the Prime and Backside Shells: As soon as the motherboard is eliminated, you can be left with the highest and backside shells of the controller. Gently pull the 2 shells aside to separate them.
- Eradicating the Buttons: The buttons on the controller are secured by small screws. Unscrew these screws and take away the buttons fastidiously.
- Detaching the Joysticks: The joysticks are connected to the highest shell. Fastidiously unscrew the screws holding the joysticks in place and detach them from the controller.
- Extracting the Analog Sticks: The analog sticks are positioned inside the joysticks. Gently take away the rubber caps from the joysticks and pull out the analog sticks.
- Disconnecting the Set off Buttons: The set off buttons are positioned on the again of the controller. Fastidiously unclip the triggers and disconnect them from the controller.
- Eradicating the Microphone and USB Port: The microphone and USB port are positioned on the underside shell. Unscrew the screws holding the microphone and USB port in place and punctiliously detach them from the controller.
- Separating the Audio system: The audio system are positioned on the underside shell. Fastidiously disconnect the audio system from the controller by unplugging their connectors.
After you have efficiently disassembled the inner elements, you possibly can examine the elements for any harm or put on. If obligatory, you possibly can clear or substitute any defective elements to revive the controller’s performance.
Reassembling the Controller
Earlier than beginning the reassembly course of, be sure you have all the mandatory instruments and screws. Seek advice from the desk beneath for the proper screws and their positions.
Screw Sort Place Phillips #00 Deal with, Aspect Plates, Set off Extenders Torx T8 Battery Cowl To reassemble the controller, comply with these steps:
-
Align the Set off Extenders: Place the set off extenders onto the triggers, guaranteeing that they match snugly.
-
Connect the Aspect Plates: Align the aspect plates with the deal with and safe them utilizing the 4 #00 Phillips screws.
-
Change the Battery Cowl: Repair the battery cowl onto the again of the deal with utilizing the Torx T8 screw.
-
Insert the Set off Buttons: Slide the set off buttons into their slots till they click on into place.
-
Join the Buttons: Press the buttons (cross, circle, triangle, sq., L1, L2, R1, R2, Share, Choices, PS) onto their respective contacts.
-
Connect the Gentle Bar: Insert the sunshine bar into its slot and safe it with the #00 Phillips screw.
-
Join the Battery: Slide the battery into the battery compartment and join it to the motherboard.
-
Reassemble the Case: Match the highest and backside halves of the controller collectively and safe them with the remaining #00 Phillips screws.
-
Confirm Performance: Join the controller to your PlayStation 5 or a appropriate gadget to make sure that all buttons and functionalities are working appropriately.
Step 1: Collect Needed Instruments
Assemble a plastic opening instrument, a #000 Phillips head screwdriver, and a pair of tweezers.
Step 2: Take away the Again Panel Screws
Use the Phillips head screwdriver to take away the 5 screws securing the again panel.
Step 3: Pry Open the Again Panel
Fastidiously insert the plastic opening instrument into the seam between the again panel and the controller physique. Gently pry the again panel unfastened.
Step 4: Disconnect the Battery
Find the battery connector and gently pull it straight as much as disconnect the battery.
Step 5: Take away the Set off Buttons
Use the tweezers to elevate the set off buttons out of their sockets.
Step 6: Take away the Ribbon Cable Connectors
Disconnect the ribbon cable connectors for the motherboard, touchpad, and lightweight bar.
Step 7: Carry the Motherboard Out
Fastidiously elevate the motherboard out of the controller physique.
Step 8: Troubleshoot the Difficulty
Examine the motherboard for any apparent points, corresponding to unfastened elements or damaged traces.
Step 9: Reassemble the Controller
Reverse the disassembly steps to reassemble the controller.
Suggestions for a Profitable DIY Restore
1. Keep away from Static Electrical energy
Deal with digital elements with care to forestall harm from static electrical energy.
2. Use Correct Instruments
Make the most of the proper instruments to make sure exact disassembly and meeting.
3. Take Your Time
Do not rush the method; take your time to fastidiously comply with the steps.
4. Doc the Course of
Take photos or make notes as you disassemble the controller for simpler reassembly.
5. Clear the Elements
If obligatory, use isopropyl alcohol to softly clear the elements earlier than reassembly.
6. Check Earlier than Reassembly
Earlier than fully reassembling the controller, check the elements to make sure they’re functioning correctly.
7. Use a Magnifying Glass
Examine small elements and connectors carefully utilizing a magnifying glass.
8. Seek advice from On-line Sources
Seek the advice of on-line tutorials or boards for extra steering.
9. Search Skilled Assist if Wanted
In the event you encounter any difficulties or the restore is past your experience, do not hesitate to hunt skilled help.
10. Endurance and Precision
Performing DIY repairs requires endurance and precision. Take your time and punctiliously comply with the directions for a profitable end result.
How To Open Ps5 Controller
To open a PS5 controller, you will have a small Phillips head screwdriver. First, take away the 4 screws on the again of the controller, being cautious to not strip the screws. As soon as the screws are eliminated, you possibly can gently pry the 2 halves of the controller aside. Watch out to not harm the ribbon cable that connects the 2 halves of the controller.
As soon as the controller is open, you possibly can entry the battery, triggers, buttons, and different inner elements. Now you can clear the controller, substitute worn-out elements, or carry out different repairs.
Individuals Additionally Ask
Methods to change the battery in a PS5 controller?
To alter the battery in a PS5 controller, you will have a small Phillips head screwdriver. First, take away the 4 screws on the again of the controller, being cautious to not strip the screws. As soon as the screws are eliminated, you possibly can gently pry the 2 halves of the controller aside. Watch out to not harm the ribbon cable that connects the 2 halves of the controller.
As soon as the controller is open, you possibly can take away the previous battery and substitute it with a brand new one. You’ll want to insert the brand new battery within the right orientation. As soon as the brand new battery is put in, you possibly can reassemble the controller and tighten the screws.
Methods to repair drifting analog sticks on a PS5 controller?
Drifting analog sticks are a standard drawback with PS5 controllers. To repair this drawback, you possibly can strive cleansing the analog sticks with a cotton swab and rubbing alcohol. If this doesn’t work, it’s possible you’ll want to interchange the analog sticks. You should purchase substitute analog sticks on-line or at an area electronics retailer.
Methods to join a PS5 controller to a PC?
To attach a PS5 controller to a PC, you will have a USB-C cable. Join the USB-C cable to the controller and to a USB port in your PC. As soon as the controller is linked, you will have to put in the PS5 controller driver. You may obtain the driving force from the PlayStation web site.
