How To Change Trans Fluid On 2016 Honda Crv
Altering the transmission fluid in your 2016 Honda CR-V is a crucial a part of sustaining your automobile. The transmission fluid helps to lubricate and funky the transmission, and it additionally helps to stop put on and tear. Over time, the transmission fluid can change into soiled and contaminated, which may result in issues with the transmission. You will need to change the transmission fluid repeatedly to maintain your transmission operating easily.
Supplies You Will Want
- New transmission fluid
- Drain pan
- Funnel
- Wrench
- Rags
Step 1: Security First
Earlier than you begin working in your automotive, it is necessary to take some security precautions. Park your automotive on a stage floor and interact the parking brake. Permit the engine to chill down fully. Find the transmission fluid drain plug and place the drain pan beneath it.
Step 2: Drain the Previous Fluid
Use a wrench to loosen the drain plug and permit the outdated fluid to empty into the pan. As soon as the fluid has stopped draining, change the drain plug and tighten it securely.
Step 3: Add New Fluid
Use a funnel so as to add new transmission fluid to the transmission. Add fluid till the extent reaches the "Full" mark on the dipstick. Change the dipstick and tighten the cap.
Step 4: Examine the Fluid Stage
Begin the engine and let it run for a couple of minutes. Shift via all the gears after which examine the transmission fluid stage once more. Add extra fluid if essential to carry the extent as much as the "Full" mark.
Gathering Supplies and Instruments
Important Supplies and Instruments
Earlier than embarking on the duty of adjusting the transmission fluid in your 2016 Honda CR-V, it’s crucial to collect all the required supplies and instruments. Guarantee you’ve got the next gadgets readily available:
Supplies:
- Honda Real CVT Transmission Fluid (roughly 6 liters)
- New transmission filter
- Transmission fluid pan gasket
Instruments:
| Instrument | Description |
|---|---|
| 10mm socket wrench | For eradicating transmission pan bolts |
| 17mm socket wrench | For loosening fill plug and drain plug |
| Fluid drain pan | To catch the outdated transmission fluid |
| Funnel | For pouring within the new transmission fluid |
| Clear rags | For cleansing up any spills or particles |
| Torque wrench | For tightening bolts to specified torque values |
Finding the Transmission
1. Security First
Earlier than you begin, make sure the automobile is parked on a flat and secure floor. Interact the parking brake to stop any motion. Permit the engine to chill fully to keep away from burns or accidents.
2. Figuring out the Transmission
Find the transmission pan beneath the automobile. It’s often a rectangular-shaped steel pan situated on the backside of the transmission housing. To determine it precisely, seek the advice of your automobile proprietor’s guide or discuss with a web based diagram particularly on your 2016 Honda CR-V mannequin.
As soon as the transmission pan is recognized, it is important to scrub the encompassing space with a degreaser to take away any oil or particles that will intrude with the following steps. This may assist forestall contamination throughout the fluid change.
Draining the Previous Fluid
1. Be certain that your Honda CR-V is parked on a stage floor and the engine is cool.
2. Find the drain plug on the transmission pan. It’s often a 17mm bolt situated on the backside of the pan.
3. Use a clear oil drain pan to catch the outdated fluid. Place the drain pan below the drain plug.
4. Use an acceptable instrument (comparable to a socket wrench or field wrench) to loosen the drain plug. Watch out to not overtighten the plug, as this could harm the transmission pan.
5. Permit the outdated fluid to empty fully into the drain pan. This will likely take a number of minutes.
6. As soon as the outdated fluid has drained, clear the drain plug and reinstall it. Tighten the drain plug to the required torque utilizing a torque wrench.
7. Eliminate the outdated fluid correctly at a neighborhood recycling heart or automotive restore store.
| Step | Motion |
|---|---|
| 1 | Park the automobile on a stage floor with the engine cool. |
| 2 | Find the drain plug on the transmission pan. |
| 3 | Place a clear oil drain pan below the drain plug. |
| 4 | Use an acceptable instrument to loosen the drain plug. |
| 5 | Permit the outdated fluid to empty fully. |
| 6 | Clear the drain plug and reinstall it. |
| 7 | Eliminate the outdated fluid correctly. |
Changing the Transmission Pan Gasket
To interchange the transmission pan gasket, you have to the next instruments and supplies:
- 10mm socket wrench
- 17mm socket wrench
- New transmission pan gasket
- Transmission fluid
- Funnel
- Rags
Steps:
1. Place the automobile on a stage floor and interact the parking brake.
2. Find the transmission pan on the backside of the transmission. There are two giant bolts holding it in place.
3. Use the 17mm socket wrench to take away the 2 bolts.
4. Fastidiously decrease the transmission pan and drain the transmission fluid right into a drain pan.
Cleansing the Transmission Pan and Magnets
As soon as the transmission pan is eliminated, you have to to scrub it and the magnets. Eradicating dust and particles will assist forestall contamination of the brand new fluid and assist the pan seal correctly. Use a clear rag to wipe the pan clear. Use a brush and solvent to take away the dust and particles from the magnets. Examine the magnet for any steel shavings or different overseas materials. If you happen to discover any, it could point out a transmission downside. seek the advice of a certified mechanic for additional prognosis.
| Elements Wanted | Amount |
|---|---|
| Transmission Pan Gasket | 1 |
| Transmission Fluid | 3-4 quarts |
5. Apply a skinny bead of RTV sealant to the lip of the brand new transmission pan gasket.
6. Fastidiously place the brand new gasket on the transmission pan.
7. Raise the transmission pan and align it with the transmission.
8. Hand-tighten the 2 bolts.
9. Use the 17mm socket wrench to tighten the bolts to 18 ft-lbs.
10. Refill the transmission with the required quantity of fluid.
11. Begin the engine and let it run for a couple of minutes.
12. Examine for leaks.
Putting in the New Transmission Filter
Changing the transmission filter is a vital step in guaranteeing the graceful and environment friendly operation of your 2016 Honda CR-V. This is tips on how to do it:
- Collect the required supplies: New transmission filter, transmission fluid, drain pan, funnel, and socket wrench.
- Add New Transmission Fluid: Confer with your automobile’s service guide for the really useful quantity of transmission fluid. Use the funnel so as to add the fluid via the dipstick tube.
Find the Transmission Filter
It’s sometimes situated on the facet or backside of the transmission housing. Confer with your automobile’s service guide for the precise location.
Take away the Transmission Pan
Loosen the bolts holding the transmission pan in place and gently pry it off. Watch out to not spill any transmission fluid.
Extract the Previous Transmission Filter
Utilizing a pair of pliers or a screwdriver, take away the outdated transmission filter from the transmission housing. Examine it for any particles or harm.
Examine the Transmission Pan
Whereas the transmission pan is off, examine it for any steel shavings or different particles that will point out inside transmission issues.
Set up the New Transmission Filter
Lubricate the gasket of the brand new transmission filter with a small quantity of fresh transmission fluid. Align it with the housing and firmly press it into place till it makes a clicking sound. Tighten any bolts that safe the filter.
Reinstall the Transmission Pan
Clear the transmission pan and gasket earlier than reinstalling it. Apply a skinny layer of gasket maker to the gasket and place the pan again on the transmission housing. Tighten the bolts securely.
Tightening the Transmission Pan Bolts
To complete the transmission fluid change, the transmission pan bolts must be tightened. This step is essential to make sure there aren’t any leaks or unfastened fittings. Listed below are detailed directions on tips on how to tighten the transmission pan bolts in your 2016 Honda CR-V:
1. Find the transmission pan bolts
The transmission pan bolts are situated across the perimeter of the transmission pan. They’re sometimes 10mm or 12mm bolts and will have washers beneath them.
2. Clear the bolt threads
Use a clear rag to wipe away any dust or particles from the bolt threads. This may assist forestall cross-threading and guarantee a correct seal.
3. Apply thread sealant (non-obligatory)
For added safety in opposition to leaks, you may apply a small quantity of thread sealant to the bolt threads. Nevertheless, that is sometimes not essential for contemporary automobiles.
4. Tighten the bolts
Use a torque wrench to tighten the bolts to the required torque. Confer with the proprietor’s guide or restore guide for the precise torque specs. Tightening the bolts too loosely could cause leaks, whereas overtightening can harm the pan or bolts.
5. Comply with the tightening sequence
To make sure even tightening, observe a particular tightening sequence. Begin by tightening the bolts situated diagonally reverse one another. Then, steadily work your approach across the pan, tightening the remaining bolts in a crisscross sample.
6. Double-check tightness
As soon as all of the bolts have been tightened, use the torque wrench to double-check the tightness. Guarantee all bolts are torqued to the right specs. Moreover, you may examine for any indicators of leaks by inspecting the pan and surrounding space after driving the automobile for a brief distance.
| Bolt Measurement | Torque Specification |
|---|---|
| 10mm | 9 ft-lb |
| 12mm | 13 ft-lb |
Filling the Transmission with New Fluid
As soon as the outdated fluid has been drained, it is time to fill the transmission with new fluid. This is an in depth information on tips on how to do it:
1. Find the fill plug.
The fill plug is often situated on the facet of the transmission case. It is sometimes a 17mm or 19mm bolt.
2. Take away the fill plug.
Use a wrench to rigorously take away the fill plug. Watch out to not drop it into the transmission.
3. Insert the funnel into the fill gap.
Place a funnel into the fill gap to make it simpler to pour the brand new fluid.
4. Pour within the new fluid.
Begin pouring the brand new fluid into the funnel. The quantity of fluid wanted will rely upon the particular transmission. Seek the advice of your automobile’s proprietor’s guide for the correct quantity.
5. Examine the fluid stage.
As soon as you’ve got poured within the new fluid, use a dipstick to examine the fluid stage. The dipstick ought to be inserted into the fill gap and pulled out to examine the fluid stage. The fluid ought to be between the “Full” and “Add” marks on the dipstick.
6. Repeat steps 4-5 till the fluid stage is appropriate.
If the fluid stage is low, add extra fluid and examine the extent once more. Repeat this course of till the fluid stage is appropriate.
7. Reinstall the fill plug.
As soon as the fluid stage is appropriate, reinstall the fill plug. Tighten the plug securely, however don’t overtighten it.
| Instruments Wanted: |
|---|
| Wrench |
| Funnel |
| Dipstick |
Checking the Fluid Stage
Supplies you will want:
– Clear rag or paper towels
– Funnel
– Trans fluid
Step-by-step directions:
1. Park your CR-V on a stage floor and permit the engine to chill.
2. Find the transmission dipstick below the hood in direction of the again of the engine.
3. Take away the dipstick and wipe it clear with a rag or paper towels.
4. Reinsert the dipstick absolutely into the transmission and pull it out once more.
5. Examine the fluid stage on the dipstick. It ought to be between the “COLD” and “HOT” marks.
6. If the fluid stage is low, add fluid via the dipstick tube utilizing a funnel.
7. Examine the fluid stage once more and repeat steps 6-7 till the fluid stage is appropriate.
8. **Detailed Steps for Step 8:**
| Stage | Chilly | Sizzling |
|---|---|---|
| Overfilled | Above the HOT mark | Fluid can foam, overheat, and trigger transmission harm. |
| Right | Between the COLD and HOT marks | Optimum fluid stage for correct transmission perform. |
| Underfilled | Under the COLD mark | Inadequate lubrication can result in untimely transmission put on and failure. |
- Reinsert the dipstick absolutely into the transmission.
- Begin the engine and let it run for a couple of minutes.
- Recheck the fluid stage to make sure it’s nonetheless appropriate.
- You probably have any issues concerning the fluid stage or situation, seek the advice of a certified mechanic for additional help.
Flushing the Previous Fluid
• Heat up the engine and switch it off.
• Find the transmission drain plug and place a drain pan beneath.
• Fastidiously take away the drain plug and permit the outdated fluid to empty into the pan.
Changing the Filter
• As soon as the fluid has stopped draining, take away the transmission filter.
• Clear the filter housing and gasket floor.
• Lubricate the brand new filter gasket with recent transmission fluid and set up the brand new filter.
Refilling the Fluid
• Add 3.5 quarts of recent transmission fluid to the gearbox.
• Begin the engine and permit it to idle for a couple of minutes.
• Examine the transmission fluid stage utilizing the dipstick and add extra if essential.
Resetting the Transmission Adaptation Values
• Join a diagnostic scanner to the automobile’s OBD-II port.
• Navigate to the “Transmission” menu.
• Choose the “Reset Transmission Adaptation Values” choice.
• Comply with the on-screen prompts to finish the reset.
• This step may help guarantee optimum transmission efficiency after the fluid change.
• Some fashions might not require this step, so it is really useful to seek the advice of your automobile’s service guide for particular directions.
Finishing the Fluid Change
1. Reinstall the drain bolt. Be certain that to tighten it securely, however keep away from overtightening.
2. Take away the fill bolt situated close to the highest of the transmission case. Insert the funnel into the fill gap.
3. Pour the brand new fluid into the transmission, including it slowly to keep away from spills. Proceed pouring till the fluid stage reaches the underside of the fill gap.
4. Reinstall the fill bolt and tighten it securely.
5. Clear up any spilled fluid and get rid of the outdated fluid and filter correctly.
6. Reset the transmission management unit (TCU) diversifications. This may be executed utilizing a scan instrument or by disconnecting the damaging terminal of the battery for half-hour.
7. Begin the engine and let it run for a couple of minutes, shifting via all of the gears.
8. Examine the transmission fluid stage once more and regulate as essential.
9. Check drive the automobile to make sure that the transmission is shifting easily and there aren’t any leaks.
10. Extra Detailed Directions for Step 10:
a. Drive the automobile for about 10-15 miles, permitting the transmission to succeed in its working temperature.
b. Park the automobile on a stage floor and interact the parking brake.
c. Take away the transmission fluid dipstick and wipe it clear with a rag.
d. Reinsert the dipstick all the way in which after which pull it out once more. Examine the fluid stage on the dipstick. It ought to be throughout the “scorching” vary indicated on the dipstick.
e. If the fluid stage is low, add extra fluid via the fill gap utilizing a funnel. If the fluid stage is overfilled, take away some fluid utilizing a turkey baster or syringe.
f. Reinsert the dipstick and recheck the fluid stage to make sure it’s appropriate.
How you can Change Trans Fluid on a 2016 Honda CR-V
Altering the transmission fluid in your 2016 Honda CR-V is a comparatively easy course of that may be accomplished in about an hour. This is a step-by-step information that can assist you get the job executed:
Supplies you will want:
- New transmission fluid (Honda recommends utilizing Honda Real ATF DW-1)
- New transmission filter (Honda half quantity 25430-PLR-003)
- New drain plug washer (Honda half quantity 94109-20000)
- 10mm socket wrench
- 17mm socket wrench
- Funnel
Directions:
- Park the CR-V on a stage floor and interact the parking brake.
- Find the transmission drain plug situated on the underside of the transmission pan. Place a drain pan below the drain plug.
- Use a 17mm socket wrench to loosen the drain plug and permit the fluid to empty fully.
- As soon as the fluid has drained, change the drain plug and tighten it to 29 ft-lbs.
- Find the transmission filter situated on the facet of the transmission pan. Use a 10mm socket wrench to take away the bolts holding the filter in place.
- Take away the outdated filter and change it with the brand new one. Torque the bolts to eight ft-lbs.
- Clear the transmission pan and magnet of any steel shavings or particles.
- Reinstall the transmission pan and torque the bolts to eight ft-lbs.
- Use a funnel so as to add new transmission fluid via the dipstick tube. Add 3.1 quarts of fluid.
- Begin the engine and permit it to idle for a couple of minutes.
- Examine the transmission fluid stage utilizing the dipstick. The fluid stage ought to be between the “COLD” and “HOT” marks on the dipstick.
- Add extra fluid if essential and recheck the extent till it’s appropriate.
Folks Additionally Ask
How typically ought to I modify the transmission fluid on my 2016 Honda CR-V?
Honda recommends altering the transmission fluid each 30,000 miles or 2 years, whichever comes first.
What sort of transmission fluid ought to I take advantage of?
Honda recommends utilizing Honda Real ATF DW-1 transmission fluid.
Is it tough to alter the transmission fluid on a 2016 Honda CR-V?
No, it’s a comparatively easy course of that may be accomplished in about an hour with primary instruments.
Can I take advantage of a unique sort of transmission fluid?
No, Honda recommends utilizing solely Honda Real ATF DW-1 transmission fluid to make sure optimum efficiency and longevity of the transmission.
